Wireless networking and communication is the lifeblood of modern electronics, and we've got everything you need to connect your project up using different technologies.
Bluetooth is a standard which millions of devices use to communicate with each other. It's powerful, easy to use, and can be found in mobile phones, computers, microcontrollers, and more! We've got everything you need to get your next project up and running with Bluetooth communication.
Much like it's more well-known brother, the HC-05, the HC-06 is a transparent TX/RX pipeline Bluetooth module which allows devices to communicate via a serial connection with all of the Bluetooth specific handling taken care of by the module's software stack.
A small size and cost-effective Bluetooth 4.2 Audio Receiver with dual 5W power amplifier circuits. It can auto-reconnect and can be powered via USB or LiPO…
A cellular connection allows your project to break free of local networks and communicate with the world using SMS messages, 3G/4G/5G/LTE data, and heaps more!
PCIe to 5G/4G/3G HAT designed for Raspberry Pi 5, High-speed Networking, Compatible with 3042/3052 packages SIMCom/Quectel 5G modules, Multi-OS Support,...
This high gain, 7.75" antenna is perfect for AVL applications where cellular reception is a must. Connector is regular SMA so don’t confuse it with 2.4GHz antennas.
These 5G antennas are designed for 5G modules and equipment that require high efficiency and peak gain to deliver excellent throughput for access points, terminals...
Connect your microcontroller to 4G LTE networks worldwide with the Clipper Cellular Breakout Board, featuring SP/CE compatibility, SMA antenna support, and seamless integration with Raspberry Pi and RP2040 devices.
Radio Frequency allows data to be transmitted wirelessly over a greater distance than other wireless methods. Integrating it into your project is easy, and we've got plenty of ready-to-go modules.
This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.
The APC220 radio module provides a simple and economic solution to wireless data communications. The employment of an embedded high speed microprocessor and high performance IC creates a transparent UART/TTL interface, and elminates any need for packetizing and data encoding.
This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections.
The SparkFun RTK Facet is a fully enclosed GNSS receiver for centimeter-level positioning. Perfect for high precision geolocation and surveying needs...
Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a...
New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output We carry a few different GPS modules here in the Adafruit...
With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the...
An easy to use meshtastic device.
Multi-Protocol Support: Featuring nRF52840 and LR1110, it supports Bluetooth 5.0, Thread, Zigbee, and LoRa, ensuring compatibility with a wide…
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
LoRa, short for Long Range, is a wireless communication method that is built for low energy, long distances, noise immunity, and much more.
And LoRaWAN extends that connectivity to the internet.
As makers, we prefer to think of it as a wide area network (up to 40km line of sight) that provides simple, low-power communication for machines and devices.
SX130x 868M/915M LoRaWAN Gateway Module/HAT for Raspberry Pi, L76K Module(HAT only), Standard Mini-PCIe Socket, Long range Transmission, Large Capacity,...
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
RFID is all around us, from anti-theft measures to contactless payments at shops, it's making our lives easier and more convenient and you can add it to your project!
Enhance your DIY projects with this credit card-sized RFID/NFC tag featuring an NTAG213 chip. Perfect for creating access control systems, tracking tools, and contactless vending machines. Compatible with almost any 13.56MHz RFID/NFC reader. Carry it in your wallet for convenience.
This is a Raspberry Pi NFC HAT based on PN532 operating in the 13.56MHz frequency range. It supports three communication interfaces: I2C, SPI, and UART.
Unlock the power of global connectivity with our satellite communication modules, perfect for reliable wireless data transmission and robust network links.
The RockBLOCK Mk2 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky and it works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the desert? Perhaps you need to communicate in an emergency, when other networks might not be available? RockBLOCK can help you.
Wi-Fi is commonly used to wirelessly connect devices to the internet and create communication networks. It's easier than ever to give your project Wi-Fi functionality, and we've got everything you need.
Your very own TinyPICO V3 with MicroPython pre-installed. Comes with unassembled male headers, stackable headers, a JST PH battery connector, and a JST MicroBlade battery connector.
The nRF52840 Dongle is a small, low-cost USB dongle that supports Bluetooth 5, Bluetooth mesh, Thread, ZigBee, 802.15.4, ANT and 2.4 GHz proprietary protocols. The...
Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module or Upgrade firmware.
Xbee modules use wireless communication as either Series 1 (802.15.4) or Series 2 (Zigbee) and they're great for low power, medium range applications. They use a mesh networking topology which allows you to create flexible and dynamic device networks. Xbee modules are perfect for weather stations, home/garden automation, and much more.
The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs. The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission. As the innovative design, XBee-PRO can be in the range 2-3 times beyond the standard ZigBee modules. XBee-PRO modules work in the ISM 2.4 GHz frequency band. The MaxStream's XBee (1 mW) Zigbee module is pin-compatible.
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.