reComputer J4011 is a hand-size edge AI box built with Jetson Orin™ NX 8GB module which delivers up to 70 TOPS AI performance and has a rich set of IOs...
reComputer Industrial series includes compact edge computers built with NVIDIA advanced AI embedded systems: NVIDIA Jetson Orin™ NX/Orin™ Nano/Xavier NX...
Seeed Studio XIAO Series are diminutive development boards, sharing a similar hardware structure, where the size is literally thumb-sized. The code name...
measures air temperature, relative humidity, barometric pressure, light intensity, rainfall (optical), wind speed, wind direction (ultrasonic), PM2.5, PM10 and CO2
Seeed Studio XIAO ESP32S3 leverages dual-core, Xtensa processor with RISC-V architecture, supporting both Wi-Fi and BLE wireless connectivities. It is a...
This thumb-sized LoRa dev kit, featuring the XIAO ESP32S3 and Wio-SX1262 LoRa module, is an ideal starter kit for Meshtastic and LoRa/LoRaWAN projects. Supporting WiFi, BLE, and LoRa, it includes a built-in power management chip and can be extended via IIC, UART, and other GPIO interfaces, with compatibility for Arduino development.
Zigbee 3.0 USB Dongle Plus–ZBDongle-E is a universal Zigbee USB stick. It is based on EFR32MG21 and pre-flashed with the Zigbee coordinator firmware based...
An easy to use meshtastic device.
Multi-Protocol Support: Featuring nRF52840 and LR1110, it supports Bluetooth 5.0, Thread, Zigbee, and LoRa, ensuring compatibility with a wide…
Seeed XIAO BLE Sense is a development board that has equipped a powerful Nordic nRF52840 chip with FPU operating at 64MHz. It connects with Bluetooth and...
Seeed Studio XIAO ESP32C3 is a thumb-sized microcontroller, equipped a highly-integrated ESP32-C3 chip, built around 32-bit RISC-V operating up to 160...
The kit integrates the ReSpeaker Lite dual-microphone array and a powerful pre-soldered XIAO ESP32S3 processor, offering exceptional voice recognition, noise reduction, and voice processing capabilities thanks to its onboard AI NLU algorithms.
Features
Enhanced Connectivity: Combines 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5(LE), and IEEE 802.15.4 radio connectivity, allowing you to apply the...
This is the pre-soldered version of Seeed Studio XIAO nRF52840, which is carrying wireless capability for the first time and it supports Bluetooth 5.0,...
RPLiDAR S3 is a 360-degree ToF(Time of Flight) laser sensing scanner that samples up to 32 kHz with 0.1125° angular resolution, capable of generating 2D...
Discover the reTerminal DM Industrial HMI, a powerful Raspberry Pi CM4-powered controller featuring hybrid connectivity, IP65 protection, and versatile interfaces including CAN bus, RS485, RS232, and Gigabit Ethernet for advanced industrial automation and
RF Explorer 6G COMBO+ is the most powerful Spectrum Analyzer model, covering the full 6GHz range starting at 50KHz up to 6.1GHz with no gaps or limitations.
A functional expansion board for Seeeduino XIAO of only half Raspberry Pi 4 size. With OLED display, embedded RTC, expandable memory mini SD card slot,...
The IP68 RS485 Total Solar Radiation Sensor measures real-time solar total radiation from 300 to 1100 nanometers. It's ideal for environmental monitoring...
RPLIDAR A1 is a low cost 360-degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. The system can perform a 360degree scan within a 6meter range....
A 7-inch HDMI monitor with driver-free capacitive touch, delivering bright 1024×600 visuals, ten-point multi-touch and dual USB host ports for expansion.
Seeed Studio Round Display for XIAO is an expansion board compatible with all XIAO development boards. It features a fully covered touch screen on one side, designed as a 39mm disc. It contains an onboard RTC holder, charge chip, and TF card slot...
WT32-SC01 Plus is a development board for visual touch screen, the board is equipped with GUI platform firmware developed independently, support graphic...
Please continue if you would like to leave feedback for any of these topics:
Website features/issues
Content errors/improvements
Missing products/categories
Product assignments to categories
Search results relevance
For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.
Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.