Zigbee 3.0 USB Dongle Plus–ZBDongle-E
In stock, ships same business day if ordered before 2PM
Delivered by Fri, 3rd of May
Quantity Discounts:
- 10-25 $42.42 (exc GST)
- 25+ $41.09 (exc GST)
Restrictions apply to this RF Equipment for use in Australia:
- Only to be operated on 433Mhz / 915-930Mhz / 2.4Ghz (check the product description for compatible frequency ranges).
- If operating outside of shared frequencies or in such a way that is beyond low interference potential devices are intended to function, then you have obtained the appropriate authorisation to do so.
For use in other locations around the world:
- Follow region-specific frequency spectrum rules.
A declaration of use will need to be submitted during checkout.
Zigbee 3.0 USB Dongle Plus–ZBDongle-E is a universal Zigbee USB stick. It is based on EFR32MG21 and pre-flashed with the Zigbee coordinator firmware based on EZNet 6.10.3 out of box. It can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices.
Features
-
Perfect for Home Assistant: Support smart home platforms like Home Assistant, openHAB, Zigbee2MQTT, loBroker, Domoticz Zigbee Plugin, Jeedom Zigbee Plugin
-
High communication quality: SMA interface for the external rotatable antenna, +20dBm output gain, further signal reach
-
Support various platforms: Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation)
- Powerful MCU: EFR32MG21 is a 2.4 GHz wireless SoC optimized for line-powered ZigBee, Thread, and Bluetooth mesh networking applications, including connected lighting, gateways, voice assistants, and smart Electricity meter
-
Certification: CE/FCC/RoHS
Zigbee 3.0 USB Dongle Plus–ZBDongle-Es is a universal Zigbee USB stick. It can be directly plugged into your computer or Raspberry Pi and can be used as a Zigbee gateway in Home Assistant, openHAB, Zigbee2MQTT, or other open-source platforms to locally control all your Zigbee devices. It supports a wide range of devices, such as switches, temperature and humidity sensors, Wireless door/window sensors, etc, and can manage various sub-devices from various brands or flash router firmware to extend the network range.
It is based on the EFR32MG21 and pre-flashed with the Zigbee coordinator firmware based on EZNet 6.10.3 out of box. It has an SMA interface for an external rotatable antenna with a +20dBm output gain for further signal reach. It supports a working temperature of -10°C~40°C and a working height of =2000m, which makes it applicable to use indoors. And the aluminum housing effectively reduces signal interference from peripherals.
You can also develop this on various platforms, such as Linux, Ubuntu, Raspbian, Windows, macOS (Windows and macOS require corresponding driver installation). Click to follow the tutorial on using SONOFF Dongle Plus on Home Assistant.
Specifications
|
MCU |
EFR32MG21 |
|
Serial Interface Protocol |
EmberZNet (EZSP) |
|
USB-Serial Chip |
CH9102F |
|
Input |
5VDC 100mA Max |
|
Output Power |
20dBm(default) |
|
Antenna |
External antenna (Manual installation) |
|
Zigbee |
Zigbee 3.0(IEEE 802.15.4) |
|
Security |
WPA/WPA2 |
|
Flow Control |
Software flow control |
|
Encryption type |
AES-128 |
|
Working temperature |
-10°C~40°C |
|
Working height |
=2000m |
Application
- Universal Zigbee gateway in Home Assistant
- Extend the network range
Partlist
| Zigbee 3.0 USB Dongle Plus–ZBDongle-E | 1 |
| Antenna | 1 |
| User Manual | 1 |
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $6+ for Standard Post (typically 6+ business days, tracked)
- $10+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $11+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Guides
The Maker Revolution
How to network XBee and the Arduino
What are Xbee Modules?
Projects
Accurate IoT Clock With ESP8266
Days2Bin: Pico Powered Bin Reminder
Raspberry Pi Video Looper Display Installation | Overshare Video Festival
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments