Radio Frequency allows data to be transmitted wirelessly over a greater distance than other wireless methods. Integrating it into your project is easy, and we've got plenty of ready-to-go modules.

Transceivers

RF transceiver allows signals to be both transmitted and received. They're incredibly handy for all kinds of projects involving wireless communication.
  1. PiicoDev Transceiver 915MHz
    Rating:
    100% of 100
    SKU: CE08757 Brand: PiicoDev Guides (2)

    Unlock wireless communication up to 100m with this long-range transceiver.

    - +

    157 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  2. Adafruit RFM69HCW Transceiver Radio Breakout - 433 MHz
    Rating:
    100% of 100
    SKU: ADA3071 Brand: Adafruit
    "You see, wire telegraph is a kind of a very, very long cat. You pull his tail in New York and his head is meowing in Los Angeles. Do you understand this? And radio...
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  3. APC220 Radio Communication Module
    Rating:
    100% of 100
    SKU: TEL0005 Brand: DFRobot
    The APC220 radio module provides a simple and economic solution to wireless data communications. The employment of an embedded high speed microprocessor and high performance IC creates a transparent UART/TTL interface, and elminates any need for packetizing and data encoding.
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  4. Adafruit Feather RP2040 RFM69 Packet Radio - 868 or 915MHz - RadioFruit and STEMMA QT
    Rating:
    100% of 100
    SKU: ADA5712 Brand: Adafruit
    This is the Adafruit Feather RP2040 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with packet radio...
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th

Development Tools

Whether it's a new project, or simply leveling up your workbench, our range of RF development tools can help.
  1. HackRF One
    SKU: WRL-13001 Brand: Sparkfun

    This is the HackRF One, a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1MHz to 6GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.

    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 5 to 8 day lead time
  2. RF Explorer - 3G Combo (Seeed Studio)
    SKU: SS109990009 Brand: Seeed Studio
    RF Explorer is a handheld digital spectrum analyzer, a very affordable tool for work in all popular frequency bands. It is based on a highly integrated...
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 8 to 10 day lead time
  3. RF Explorer Signal Generator (RFE6GEN) (Seeed Studio)
    SKU: SS114990081 Brand: Seeed Studio
    The RF Explorer Signal Generator (RFEGen) is a powerful, wideband fully programmable RF signal generator. It is the perfect companion for Spectrum Analyzer...
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th

Receivers

If you only need to receive data at a certain frequency, then a simple RF receiver is perfect. Be sure to pair it with a transmitter of the same frequency.
  1. RF Link Receiver - 4800bps (434MHz)
    Rating:
    100% of 100
    SKU: WRL-10532 Brand: Sparkfun
    These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only receivers, they will only work communicating data one-way, you would need two pairs (of different frequencies) to act as a transmitter/receiver pair.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 5 to 8 day lead time

Adaptors

Whether it's extending your current antenna, or using different connector types, we've got all kinds of adaptors to suit your project.
  1. SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
    Rating:
    96% of 100
    SKU: ADA851 Brand: Adafruit
    This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
    - +

    47 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  2. RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable
    Rating:
    98% of 100
    SKU: ADA852 Brand: Adafruit
    This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called...
    - +

    8 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  3. Interface Cable - SMA Female to SMA Male (25cm)
    Rating:
    100% of 100
    SKU: WRL-12861 Brand: Sparkfun
    This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough for most consumer GPS, cellular, and other RF applications and they use a threaded housing to create strong mechanical connections.
    - +

    7 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  4. Interface Cable SMA to U.FL
    Rating:
    100% of 100
    SKU: FIT0219 Brand: DFRobot
    The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections.
    - +

    11 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  5. Reinforced Interface Cable - SMA Male to TNC Male (300mm)
    SKU: CAB-21739 Brand: Sparkfun
    This is a 300mm (1 foot) Male TNC to Male SMA cable with injection molded stress-relief boots...
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th

Connectors

If you're integrating RF into your project, chances are you'll need an antenna. We've got different connectors for different antenna types depending on your needs.
  1. SMA Connector (PCB edge mount)
    Rating:
    87% of 100
    SKU: WRL-00593 Brand: Sparkfun
    PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 5 to 8 day lead time
  2. u.FL SMT Antenna Connector
    Rating:
    92% of 100
    SKU: ADA1661 Brand: Adafruit
    u.FL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. Adafruit use this part...
    - +

    27 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  3. RP-SMA Connector (PCB edge mount)
    SKU: WRL-00592 Brand: Sparkfun
    PCB edge mount Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. This is a standard edge connector. The thickness between pins is 0.063" so that it can slide sideways onto a PCB. See the mechanical drawing to create your footprint.
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th

Antennas

In order to pick up those RF waves, you'll need an antenna. Some boards may have an integrated antenna, whilst others require an external antenna.
  1. 900MHz Duck Antenna RP-SMA
    Rating:
    100% of 100
    SKU: WRL-09143 Brand: Sparkfun
    900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long.
    - +

    1 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  2. Particle Flexible GNSS Antenna - M-SoM Compatible
    SKU: CE10019 Brand: Particle
    Discover the Particle GNSS FPC Antenna, a flexible RoHS-compliant antenna certified for M404 and M524 M-SoMs, featuring omnidirectional coverage from 1164-1610 MHz with U.FL compatibility.
    - +

    0 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Available with 4 to 6 day lead time
  3. SparkFun Antenna - SMA, 2dBi (433MHz)
    SKU: WRL-20856 Brand: Sparkfun
    A 433MHz antenna that utilizes an SMA connector and is 200mm long with a gain of 2dBi...
    - +

    5 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  4. WiFi HaLow Antenna - SMA (915Mhz)
    SKU: WRL-20115 Brand: Sparkfun
    A 915MHz SMA Duck Antenna for use with the AHPI7292S WiFi HaLow HAT...
    - +

    2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th
  5. Simple Spring Antenna - 433MHz
    Rating:
    100% of 100
    SKU: ADA4394 Brand: Adafruit
    This simple spring antenna matches great with any of our 433MHz RFM and LoRa breakouts, bonnets and Feathers. They're made of copper-clad wire so you can solder...
    - +

    4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

    Delivered by Feb 27th

Did you know: We create free online courses, tutorials, and videos. For makers, by makers.

Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.