Search results for: 'stepper motor with encoder'
Learn
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$464.95 AUD, inc GST
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$454.95 AUD, inc GST
TB6600 Stepper Motor Driver
Brand: DFRobot
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
$31.65 AUD, inc GST
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
Brand: Adafruit
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...
$37.40 AUD, inc GST
Pololu Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
$109.95 AUD, inc GST
Pololu Tic T249 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
$91.30 AUD, inc GST
Bipolar Stepper Motor with Planet Gear Box (18kg.cm)
Brand: DFRobot
This is a bipolar stepper motor with a planetary gearbox (gear ratio: 5.18) and uses a standard 8mm-diameter D type output shaft, with a 1.8° step angle (200 steps/revolution).
$65.93 AUD, inc GST
Pololu Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$74.85 AUD, inc GST
Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC)
$58.30 AUD, inc GST
Raspberry Pi Motor Driving Expansion Board (Compatible with Raspberry Pi 4B / 3B+ / 3B / Zero)
Brand: DFRobot
The fully-featured robot motor expansion board supports multiple motors and servos. Perfect for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B.
...
$49.21 AUD, inc GST
EasyDriver - Stepper Motor Driver
Brand: SparkFun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST
Tic T249 USB Multi-Interface Stepper Motor Controller
Brand: Pololu
The Tic T249 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free...
$88.05 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 57×56mm, 2.5V, 2.8 A/Phase
Brand: Pololu
This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 2.5 V, allowing for a holding torque of 13 kg-cm (180 oz-in).
$239.95 AUD, inc GST
Tic T834 USB Multi-Interface Stepper Motor Controller
Brand: Pololu
The Tic T834 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free...
$71.55 AUD, inc GST
Tic T825 USB Multi-Interface Stepper Motor Controller
Brand: Pololu
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free...
$71.55 AUD, inc GST
Tic T500 USB Multi-Interface Stepper Motor Controller
Brand: Pololu
The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free...
$54.20 AUD, inc GST
Pololu Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Brand: Pololu
The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC).
$74.85 AUD, inc GST
M5Stack 4-Channel Smart Motor Driver STM32
Brand: M5Stack
Explore the M5Stack 4-Channel Smart Motor Driver STM32, a versatile encoder motor control module featuring STM32+BL5617 technology, supporting multiple control modes and real-time power monitoring for robotics and automation applications.
$37.70 AUD, inc GST
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$259.95 AUD, inc GST
5V Geared Stepper Motor
Brand: Waveshare
5V Geared stepper motor
$7.90 AUD, inc GST
Big Motor + Encoder Module for Yukon
Brand: Pimoroni
Drive a powerful brushed motor (with encoder feedback) at up to 8A continuous from your Pimoroni Yukon project...
$25.15 AUD, inc GST
18° Micro Stepper Motor for Arduino
Brand: DFRobot
For stepper motor newbies, you’ve just come to the right place! This 10mm micro stepper motor offers 18° per step and 2-phase 4-wire. No special driver board required...
$20.82 AUD, inc GST
Similar matches
28BYJ-48 Stepper Motor Module with Driver for STEM Robotics (5V, 0.9 kgf·cm)
Brand: DFRobot
The all-in-one 28BYJ-48 stepper motor module with an integrated driver. Its plug-and-play 4-pin interface is perfect for Arduino classroom projects...
$19.15 AUD, inc GST
N20 DC Motor with Magnetic Encoder - 6V with 1:100 Gear Ratio
Brand: Adafruit
The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that relate to voltage, environment, and manufacturing changes. So, the second step is to figure out how fast it's going!
$25.20 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST
12V DC Motor 350RPM w/Encoder (12kg*cm)
Brand: DFRobot
This is a gear motor a 34:1 gearbox and an integrated quadrature encoder.
$48.11 AUD, inc GST
Brushless DC Motor with Encoder 12V 159RPM
Brand: DFRobot
This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor to be controlled easily. This product is convenient for mobile robotic platform since there is less drive pin and less MCU resource consumption.
$31.49 AUD, inc GST
N20 Motor With Encoder and Cable (Pair)
Brand: SparkFun
N20 motors are very popular for small-scale robots applications, because they're super compact, powerful, and durable. The entire motor fits within the...
$36.90 AUD, inc GST
N20 DC Motor with Magnetic Encoder - 6V with 1:50 Gear Ratio
Brand: Adafruit
The first step in a robotics project is to get a motor spinning. Once you've done that you quickly learn that not all motors go the same speed, even if they are the same part number! There are always variations that relate to voltage, environment, and manufacturing changes. So, the second step is to figure out how fast it's going!
$24.30 AUD, inc GST
Micro DC Geared Motor w/Encoder-SJ01 (6V 160RPM 120:1)
Brand: DFRobot
This is the DFRobot Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor's service life.
$12.52 AUD, inc GST
Small Size and High Torque Stepper Motor - 24BYJ48 (Seeed Studio)
Brand: Seeed Studio
Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Automatic curtains etc. Specification: •Phase: 4 •Step...
$11.95 AUD, inc GST
Micro Metal Geared Stepper Motor (12V 0.6kg.cm)
Brand: DFRobot
This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications which require precise rotation control.
$9.16 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Brand: Pololu
This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).
$97.65 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 2.7 V, allowing for a holding torque of 1.4 kg-cm (20 oz-in).
$89.10 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase
Brand: Pololu
This NEMA 14-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 500 mA at 10 V, allowing for a holding torque of 1 kg-cm (14 oz-in).
$56.70 AUD, inc GST
12V Low Noise DC Motor 146RPM w/Encoder
Brand: DFRobot
This is DFRobot customized high-quality DC motor. The best part of this motor is that it is low noise and high torque output motor with optical encoder buildin.
$77.11 AUD, inc GST
Micro DC Geared Motor w/Encoder-SJ02 (6V 160RPM 120:1)
Brand: DFRobot
This is the DFRobot Micro DC geared motor with encoder. It is a motor with a 120:1 gearbox and an integrated quadrature encoder that provides a resolution of 16 pulse single per round giving a maximum output of 1920 within one round. With an Arduino controller and motor driver, applications for this include a closed-loop PID control or PWM motor speed control. This motor is an ideal option for mobile robot projects. The copper output shaft, embedded thread and reinforced connector greatly extends the motor's service life.
$12.53 AUD, inc GST
Stepper Motor with Cable
Brand: SparkFun
This is a simple, but very powerful stepper motor with a 4-wire cable attached.
$60.50 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).
$214.95 AUD, inc GST
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase
Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1.9 kg-cm (26 oz-in), and each phase draws 1 A at 5.4 V. This stepper motor’s flat profile (25.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$159.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.