Search results for: &#039;piicodev capacitive touch sensor&#039;

PiicoDev RFID Module (NFC 13.56MHz)

Read (and write) RFID/NFC tags with this compact module.

$11.45 AUD, inc GST

PiicoDev Laser Distance Sensor VL53L1X

The PiicoDev® Distance Sensor is a long-distance laser-ranging sensor that uses Time-of-Flight (ToF) to accurately measure distances up to 4m.

$20.75 AUD, inc GST

PiicoDev 3-Axis Accelerometer LIS3DH

Measure tilt-angle, linear acceleration. Detect tapping and shaking.

$5.25 AUD, inc GST

PiicoDev Expansion Board for Pico (Non-Recharging)

Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.

$5.90 AUD, inc GST

Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This...

$15.10 AUD, inc GST

PiicoDev Ultrasonic Rangefinder

Use echolocation to measure distance

$9.55 AUD, inc GST

PiicoDev Adapter for Micro:bit

Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.

$13.20 AUD, inc GST

PiicoDev Potentiometer (Slide)

Add intuitive analogue control to your project.

$10.25 AUD, inc GST

Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touchpads with plug-and-play STEMMA QT connector and large alligator/croc-clip friendly pads, its a no-solder solution to capacitive touch sensing.

$13.25 AUD, inc GST

PiicoDev Potentiometer (Rotary)

Add intuitive, analogue control to your project.

$7.70 AUD, inc GST

CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This...

$14.05 AUD, inc GST

This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance...

Grove - Touch Sensor (Seeed Studio)

Brand: Seeed Studio

$7.70 AUD, inc GST

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.

Capacitive Touch Breakout - AT42QT1010

Brand: Sparkfun

$6.90 AUD, inc GST

Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

This breakout board is the simplest way to create a project with a single "momentary" capacitive touch sensor. No microcontroller is required here - just power with...

$10.50 AUD, inc GST

Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with...

$10.50 AUD, inc GST

Now, it is time to add a more fancy interactive way to your project. This DFRobot touch kit comes with three types touch sensors. An ipod styple wheel touch, a keypad touch which supports backlit and a grid touch pad which can recoginze something unique.

Capacitive Touch Kit For Arduino

Brand: DFRobot

$32.70 AUD, inc GST

Do you want to replace a slider or a button on your art project or science experiment with a more interesting interface? This Capacitive Touch Slider is a "Qwiic"...

SparkFun Capacitive Touch Slider - CAP1203 (Qwiic)

Brand: Sparkfun

$13.60 AUD, inc GST

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun Capacitive Touch Breakout offers...

SparkFun Capacitive Touch Breakout - AT42QT1011

Brand: Sparkfun

$9.15 AUD, inc GST

Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070

This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here - just power with 1.8 to 5.5VDC...

$13.20 AUD, inc GST

Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting...

$26.95 AUD, inc GST

This sensor module integrates gesture recognition and touch detects functions in one piece, and provides an adjustable detection range within 0~30cm. When connected...

Gesture & Touch Sensor

Brand: DFRobot

$21.70 AUD, inc GST

Out of stock

Similar matches

ESP32-S3 7inch Capacitive Touch Display Development Board

ESP32-S3 7inch Capacitive Touch Display Development Board, ESP32 With Display, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz...

$72.30 AUD, inc GST

ESP32-S3 4.3inch Capacitive Touch Display Development Board

ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi...

$61.85 AUD, inc GST

10.1inch Capacitive Touch Display for Raspberry Pi, 1280×800, IPS, DSI Interface

10.1inch Capacitive Touch Display for Raspberry Pi, 1280×800, IPS, DSI Interface...

$129.95 AUD, inc GST

PiicoDev Button

An accessible, tactile interface adds control to your project.

$8.05 AUD, inc GST

Add a display to your Raspberry Pi project using the official 7 inch touchscreen display. It's perfect for all kinds of projects and allows your Pi to mount on the back with all of the cables hidden from view.

Pi Foundation PiTFT - 7" Touchscreen Display for Raspberry Pi

Brand: Raspberry Pi

$104.52 AUD, inc GST

3.5inch Capacitive Touch Display (F) for Raspberry Pi

3.5inch Capacitive Touch Display (F) for Raspberry Pi, IPS Panel, 320×480 Resolution, 5-point Touch, Immersion Gold Process, Toughened Glass Panel...

$35.30 AUD, inc GST

10.1inch Capacitive Touch Display (1280×800 pixels)

10.1inch Capacitive Touch Display, Optical Bonding Toughened Glass Panel, 1280×800, IPS, HDMI Interface

$139.95 AUD, inc GST

5 Inch Low-Power DSI IPS Touch Display for Raspberry Pi (800×480 Pixels)

5inch Capacitive IPS Touch Display For Raspberry Pi, 800×480, DSI Interface, Low Power Consumption...

$69.95 AUD, inc GST

This little display is perfect for a dedicated, simple Raspberry Pi touch-interface. Simply plug it onto the Pi's GPIO and execute the provided installation command.

3.5inch Display Module Touch LCD with Stylus for Raspberry Pi Model B/B+

Brand: Core Electronics

$27.10 AUD, inc GST

10.1inch DSI Capacitive Touch Display (800×1280, IPS Panel)

10.1inch DSI Capacitive Touch Display, 800×1280, IPS Panel, Optical Bonding Toughened Glass Panel, 10-Point Touch...

$109.95 AUD, inc GST

3.5inch Touch Display Module for Raspberry Pi Pico

3.5inch Touch Display Module for Raspberry Pi Pico, 65K Colors, 480×320 pixels, SPI Interface...

$34.95 AUD, inc GST

SmartiPi Touch Pro 3 - Small

Brand: Core Electronics

Mount your Pi, and Touch 2 Display in this super sleek, clean case.

$65.75 AUD, inc GST

With 480x320 color pixels, this 3.5” LCD display module adopts ILI9488 driver chip and integrates GT911 touch chip that supports 5 capacitive touch-points at most...

3.5” 480x320 TFT LCD Capacitive Touchscreen

Brand: DFRobot

$47.90 AUD, inc GST

A uniquely square, high-resolution, high-speed, 4.0" touchscreen display for Raspberry Pi – it's hip to be square!

Pimoroni HyperPixel 4.0 Square Touch - Hi-Res Display for Raspberry Pi

Brand: Pimoroni

$139.95 AUD, inc GST

7inch DSI Capacitive Touch Display for Raspberry Pi

7inch Capacitive Touch Display For Raspberry Pi, 800×480, DSI Interface

$80.75 AUD, inc GST