Search results for: &#039;dfrobot sensor&#039;

Hall Sensor

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right！This Hall sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See below picture for a quick demo!

$9.64 AUD, inc GST

DFRobot MAX30102 Heart Rate and Oximeter Sensor

The MAX30102 is integrated pulse oximetry and heart-rate monitor biosensor module based on PPG ((PhotoPlethysmoGraphy). It is so small that you can just wear it...

$37.06 AUD, inc GST

Gravity: Lightning Sensor

The Gravity Lightning Sensor employs AMS's AS3935 lightning sensor IC and a Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoors or outdoors.

$34.79 AUD, inc GST

6 DOF Sensor - MPU6050

At the beginning,the inertial measurement unit is an electronic device that measures and reports on a craft's velocity, orientation, and gravitational forces, using a combination of accelerometers,gyroscopes, and magnetometers.

$23.10 AUD, inc GST

10 DOF Mems IMU Sensor

$21.01 AUD, inc GST

Water Flow Sensor - 1/2"

The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor will rotate and the rate of rotation will vary with the rate of flow. The hall effect sensor will then output a pulse width signal. Connect it to a microcontroller and you can monitor multiple devices such as your coffee maker, sprinkler or anything else, and control the water flow rate to suit your needs!

$16.78 AUD, inc GST

Non-contact Capacitive Liquid Level Sensor

This is a non-contact liquid level sensor with status indicator and adjustable sensitivity. It can be used in liquid detection of non-metallic container or pipe(outer...

$20.57 AUD, inc GST

Light Sensor-BH1750

This is a BH1750 light intensity sensor breakout board with a 16 bit AD converter built-in which can directly output a digital signal, there is no need for complicated calculations.

$8.20 AUD, inc GST

Fermion: AHT20 Temperature and Humidity Sensor (Breakout)

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...

$7.10 AUD, inc GST

Weatherproof Ultrasonic Sensor with Separate Probe

Need something to sense distance, but you're expecting things to get a bit wet? Well look no further! This sensor can stretch all the way out to 4.5m in ideal conditions, with a resolution of 0.5cm...

$25.32 AUD, inc GST

Analog Sound Sensor

This is an updated version of the Analog Sound Sensor. Analog Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal by imitating the input interface.

$7.14 AUD, inc GST

Capacitive Touch Sensor

Are you tired of clicking a mechanical button? Try our capacitive touch sensor. Right now we can find touch sensors on most electronic devices. So upgrade your Arduino project with our new version touch sensor and make it cool!!

$6.06 AUD, inc GST

Basic Sensor Set For Arduino

DFRobot sensor set. Made up of light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale

$38.96 AUD, inc GST

Advance Sensor Set for Arduino

If you want to start playing with sensors, this kit will be the perfect choice for you to get started.

$137.01 AUD, inc GST

BMP388 Digital Pressure Sensor Module

This is a newly-introduced Breakout version of BMP388 Sensor from DFRobot with pressure and temperature measurement. It supports Arduino code control, and the BMP388...

$11.47 AUD, inc GST

UV Sensor V2

This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight. It can be used in UV Index Monitoring, DIY project, UV-A Lamp Monitoring, Plants growing Environmental monitoring...etc.

$9.34 AUD, inc GST

RS485 Temperature & Humidity Sensor

This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable digital processing...

$49.70 AUD, inc GST

Piezo Disk Vibration Sensor

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.

$7.12 AUD, inc GST

A01NYUB Waterproof Ultrasonic Sensor

Ultrasonic distance sensor determines the distance to a target by measuring time lapses between the sending and receiving of the ultrasonic pulse. This A01NYUB Waterproof...

$48.27 AUD, inc GST

Differential Pressure Sensor (±500pa)

This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance...

$64.99 AUD, inc GST

Non-contact IR Thermometer Sensor

We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This can mean longer response times and reading inaccuracies offset by ambient temperature. By contrast, non-contact measurement uses infra-red radiation to measure the temperature and does not require a direct touch. Additionally, this method of measurement can be read quickly and accurately.

$31.54 AUD, inc GST

Infrared Laser Distance Sensor (50m/80m)

This is an infra-red laser distance sensor with impressive range and accuracy for the price ...Read more

$128.09 AUD, inc GST

Photodiode

This photodiode is made out of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It can be used to generate a current when light hits the body of the diode. Depending on your project, this can be easier to work with than a photoresistor.

$1.90 AUD, inc GST

Gravity: AHT20 Temperature and Humidity Sensor

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...

$6.63 AUD, inc GST

RP-L-170 Thin Film Pressure Sensor

This is a long flexible thin film pressure sensor with a length of 170mm, which can be used to realize highly sensitive detection of pressure. The sensor is durable...

$10.51 AUD, inc GST

Gravity: Analog Turbidity Sensor

The turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.

$16.29 AUD, inc GST

Digital Infrared Motion Sensor

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low.

$7.14 AUD, inc GST

Analog Ambient Light Sensor

Here comes DFRobot's new Analog Ambient Light Sensor. Brand new design and much more convenient to use.

$4.49 AUD, inc GST

BME680 Environmental Sensor Module

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer...

$29.14 AUD, inc GST

Gravity BMP388 Barometric Pressure Sensors

This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code...

$11.52 AUD, inc GST

Digital Tilt Sensor (Arduino Compatible)

This is a digital tilt switch. It can be used as a simple tilt sensor. Simply plug to your microcontroller of choice and you can make amazing interactive projects!

$3.09 AUD, inc GST