BME680 Environmental Sensor Module

SKU: SEN0375 Brand: DFRobot
BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer...
$30.20 AUD, inc GST
$27.45 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 5th of Mar

Quantity Discounts:

  • 10-25 $26.63 (exc GST)
  • 25+ $26.08 (exc GST)
- +

4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Introduction

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. It is designed for air quality monitor, and due to the MEMS technology, BME680 has a small size and low power consumption. It can be widely used in environmental monitoring, home automation and control, Internet of Things (IoT) wearable device, GPS enhancement, etc.

This BME680 Sensor adopts more simplified breakout design and leads out pitch 2.54 pin/female and SPI connectors. And it has onboard voltage regulator IC and I2C level translator circuit, which makes this sensor more convenient to be integrated into various applications.

With the development of industrialization, air pollution is getting worse and worse. Toxic chemical odors are even common with new furniture. These invisible killers are destroying your health day by day. You do need to concern about your health as soon as possible and this DFRobot Breakout BME680 environmental sensor can help you make an air quality monitor so as to take good care of your health!

Features

  • MEMS sensor, small size, low power consumption, high reliability
  • Wide voltage input, compatible with 3.3V and 5V controller
  • Highly integrated environmental sensor: temperature, humidity, barometer and VOC, four-in-one environmental parameter monitoring
  • I2C connector, plug and play
  • Small size and easy to install

Specification

  • Input Voltage: 3.3V~5.5V
  • Operating Current: 5mA (25mA in VOC Measurement)
  • Communication Interface: I2C(Support 3.3V/5V) or SPI(other non-I2C ports only support 3.3V)
  • Default I2C Address: 0x76
  • Temperature Measurement Range: -40°C ~ 85°C
  • Temperature Measurement Precision: ±1.0°C(0~65°C)
  • Humidity Measurement Range: 0-100%r.H.
  • Humidity Measurement Precision: ±3%r.H.(20-80% r.H.,25°C)
  • Atmospheric Pressure Measurement Range: 300-1100hPa
  • Atmospheric Pressure Measurement Precision: ±0.6hPa(300-1100hPa,0~65°C)
  • IAQ (Indoor Air Quality) Range: 0~500 (the larger, the worse)
  • Dimension: 18×15.6(mm) /0.71x0.61(inches)

Documents

Parts List

  • BME680 Environmental Sensor Module x1
  • 2.54 Single Row 4PIN Connector x1
  • 2.54 Single Row 6PIN Connector x1
  • Product Comments

    Exact shipping can be calculated on the view cart page (no login required).

    Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

    We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

    • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
    • $6+ for Standard Post (typically 6+ business days, tracked)
    • $10+ for Express Post (typically 2+ business days, tracked)
    • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

    Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

    Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

    International Orders - the following rates are for New Zealand and will vary for other countries:

    • $11+ for Pack and Track (3+ days, tracked)
    • $16+ for Express International (2-5 days, tracked)

    If you order lots of gear, the postage amount will increase based on the weight of your order.

    Our physical address (here's a PDF which includes other key business details):

    Unit 18, 132 Garden Grove Parade
    Adamstown
    NSW, 2289
    Australia

    Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

    Have a product question? We're here to help!

    Write Your Own Review

    Videos

    View All

    Guides

    Weather Station with Arduino Tutorial

    This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...
    This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...

    Micro:bit Temperature and Humidity Sensing

    The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...
    The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...

    Temperature Sensing with the TMP36 and Pycom

    Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...
    Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...

    The Maker Revolution

    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
    The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

    Projects

    Have you ever wanted to make a Weatherproof Weather and Air Quality System that transmits its edge-...

    Camera Dew Controller

    Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...
    Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...

    ThingSpeak temperature & pressure logger

    This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
    This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
    Feedback

    Please continue if you would like to leave feedback for any of these topics:

    • Website features/issues
    • Content errors/improvements
    • Missing products/categories
    • Product assignments to categories
    • Search results relevance

    For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

    Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

    Makers love reviews as much as you do, please follow this link to review the products you have purchased.