Temperature Sensor - Waterproof (DS18B20)

Rating:
100% of 100
SKU: SEN-11050 Brand: Sparkfun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
$20.15 AUD, inc GST
$18.32 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Mon, 25th of Nov

Quantity Discounts:

  • 10-25 $17.77 (exc GST)
  • 25+ $17.40 (exc GST)
- +

4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Favourite product

Shipping:

  • $7+ Standard (5+ days*, tracked)
  • $11+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

It's also worth mentioning that this is a genuine DS18B20 and will operate as it expected in the Maxim datasheet.

Be aware that lower-priced devices are often clones and may not operate as expected or be permanently damaged when using official software.

Dimensions: Probe is 7mm in diameter and roughly 26mm long. Overall length (including wire) is 6 feet.

Note: The pinout for this sensor is as follows: RED=Vcc BLACK=GND WHITE=SIG

Features:

  • 3.0-5.5V input voltage
  • Waterproof
  • -55°C to+125°C temperature range
  • ±0.5°C accuracy from -10°C to +85°C
  • 1 Wire interface

Documents:

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $7+ for Standard Post (typically 6+ business days, tracked)
  • $11+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $12+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Weather Station with Arduino Tutorial

This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...
This Weather Station with Arduino was designed for the South Australia Catholic Education STEM Weath...

Micro:bit Temperature and Humidity Sensing

The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...
The Micro:bit has the ability to measure temperature by sensing the temperature of the sil...

Temperature Sensing with the TMP36 and Pycom

Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...
Note: With the rollout of TTNv3, the "Setup" section of this guide no longer works - but we're keepi...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Projects

Have you ever wanted to make a Weatherproof Weather and Air Quality System that transmits its edge-...

Camera Dew Controller

Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...
Introduction My passion hobby is night-time time-lapse photography and astrophotography/nightscape...

ThingSpeak temperature & pressure logger

This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.