Differential Pressure Sensor (±500pa)

Rating:
100% of 100
SKU: SEN0343 Brand: DFRobot
This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance...
$69.05 AUD, inc GST
$62.77 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 7th of May

Quantity Discounts:

  • 6-12 $60.89 (exc GST)
  • 12+ $59.64 (exc GST)
- +

4 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance MEMS pressure chip and a special conditioning chip are encapsulated inside the sensor. It will give you a comparative measurement between two points. Besides, the sensor IC adopts a unique multi-stage temperature-compensation algorithm to reduce the effect of the environment on the sensor output.

Note: In order to ensure the measurement resolution and the sensor life, please use the sensor in the clean air. Do not let water enter the nozzle of the sensor, or it will cause damage to the sensor.

Features

  • Multi-stage temperature-compensation algorithm
  • I2C digital output
  • High resolution

Applications

  • Home medical care equipment

  • Portable medical equipment

  • Medical monitoring

  • Industrial control

  • Central ventilation system

Specifications

  • Operating Voltage: 3.3V~5V
  • Measuring Range: ±500pa(±1.5%FS)
  • Operating Current: <5mA
  • Communication Mode: I2C
  • I2C Address: 0x00
  • Operating Temperature Range: -40°C ~ 85°C
  • Temperature-compensation Range: -5°C ~ 65°C
  • Dimension: 14.5*24mm/0.57*0.94”

Check out the product wiki here

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Getting Hands-on with Sensors

What good is a robot if it can’t interact with the environment around it? Sensors are the back...
What good is a robot if it can’t interact with the environment around it? Sensors are the back...

Projects

Have you ever wanted to make a Weatherproof Weather and Air Quality System that transmits its edge-...

DIY Weather Station with Raspberry Pi

I wanted to build a weather station. After some googling I found a great ‘how to’ guide ...
I wanted to build a weather station. After some googling I found a great ‘how to’ guide ...

ThingSpeak temperature & pressure logger

This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
This project logs temperature and pressure observations to a ThingSpeak channel using an ESP8266 WiF...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.