Search results for: 'small oled display'

Looking for an OLED display to add to your DIY projects? Check out our White I2C OLED display with a 0.96-inch screen and 3.3V input compatibility. Easily print text and draw shapes with this go-to maker display using the SSD1306 driver.

Display text, draw shapes, animations, and even create plots.

Add a split colour display to your project, perfect for menu's and displaying data.

1.3" OLED Display module an Embedded SH1107 Driver, Using SPI/I2C Bus.

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default...

Monitor your Raspberry Pi 5's vital stats in real-time with the Argon ONE V5 OLED Status Display module, providing instant CPU temperature, system uptime, and IP address information through a sleek integrated display compatible with the Argon ONE V3 case.

Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally,...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a small 0.91in. (diagonal) frame...

The SparkFun Qwiic OLED 1.3in. is a Qwiic-enabled monochrome OLED that displays crisp white-on-black images and text...

Display meaningful output from your micro:bit project with the Kitronik :VIEW Graphics128 OLED display. Add a monochrome 128x64 display to the BBC...

If you're looking for the most compact lil' display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32...

This OLED goes out to all the fans who want more pixels! Normally Adafruit's 128x64 OLEDs are the biggest ones Adafruit have stocked that can use I2C. This one is a whopping 128x128 pixels and it even has an extra bonus - it can do grayscale pixels! Yep, you get the same crispness of a monochome OLED but with 16 levels of grayscale.

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED...

The Grove - OLED Display 1.12 V3.0 (SH1107) is a monochrome display with 128*128 resolution. It has a lower price, user-friendly design and better...

The SparkFun Qwiic Micro OLED Breakout is a Qwiic enabled version of our popular MicroView and micro OLED display!...

If you'd like a compact display, with buttons and a joystick - Adafruit have got what you're looking for. The Adafruit 128x64 OLED Bonnet for Raspberry Pi is the big sister...

The Grove - OLED Display 0.66" (SSD1306) is a monochrome display with 64×48 resolution. It contains a user-friendly design and outstanding performance with Grove I2C interface in 20mm×20mm ultra-small size.

Grove - OLED Display 0.96" is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module...

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

RP2350 1.43inch AMOLED Display Development Board, 466×466, SPI Interface Round Display, Onboard Accelerometer And Gyroscope Sensor, RTC Chip, Optional For...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons.

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally, ...

This is a screen for advanced hackers who like the look of the OLED screen we've put into the Adafruit MACROPAD RP2040. This is just the raw...

OCELL is a 0.5 inch OLED module designed as a Arduino shield and also available for other micro controllers . It is the smallest Arduino display module...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

This OLED goes out to all the fans who want more pixels in a smaller size! Normally our 128x64 OLEDs are the biggest ones we've stocked that can use...

A crisp, bright 1.12" OLED that's ideal for adding a small display to your project. Raspberry Pi and Arduino-compatible, this 128x128 pixel, monochrome white/black display is ideal for graphing, readouts, and displaying basic icons

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons...

An OLED module for the 4tronix BitBot XL, MiniBit and the Robobit Mk3(V1.3)

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any...

Grove - OLED 1.12'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 1.12" is constructed...

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using Adafruit's Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight!

The SparkFun Micro OLED Breakout Board with Headers breaks out a small monochrome, blue-on-black OLED via 0.1"-spaced, pre-soldered pins...