Home
Shop
PiicoDev
Displays
Outputs
PiicoDev OLED Display Module (128x64) SSD1306

Add to Wish List

OLED Module only. Raspberry Pi Pico and accessories not included.

Skip to the beginning of the images gallery

PiicoDev OLED Display Module (128x64) SSD1306

Rating:

100% of 100

39 Reviews

SKU: CE07911 Brand: PiicoDev Guides (5)

Display text, draw shapes, animations, and even create plots.

$16.35 AUD, inc GST

$14.86 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow* Disclaimer:
For next-day delivery, the shipping address must be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost pickup timings and order verifications. eParcel Express is typically a 1-day service within the AusPost next-day network, though it is sometimes 2+ days.

Quantity Discounts:

4+ $14.12 (exc GST)
12+ $13.38 (exc GST)
50+ $12.64 (exc GST)

Recommended Essentials:

PiicoDev Cable 50mm

$0.81

PiicoDev Cable 100mm

$0.88

PiicoDev LiPo Expansion Board for Raspberry Pi Pico

$8.50

PiicoDev Adapter for Raspberry Pi

$4.10

PiicoDev Adapter for Micro:bit

$12.75

PiicoDev Adapter for Breadboards

$2.75

The PiicoDev® OLED Display Module is perfect for adding a graphical display to your next project. The monochrome white-on-black display provides a sharp image and fits a surprising amount of detail. Use this module to display text, draw shapes, animations, and even create plots. Up to two modules may be connected on the same PiicoDev bus - this just requires each module to have a unique setting for its address switch (labelled ASW).

Display text, shapes, plots and bitmap images
128x64 pixel monochrome display
Connect up to two OLED modules together (just set unique addresses with the address switch: ASW)
PiicoDev connector, compatible with Qwiic and STEMMA QT (3.3V only)
2.54mm breakout for breadboarding/prototyping
Manufactured and supported in Australia by Core Electronics

Getting Started Guides

Technical Specifications

OLED Driver: SSD1306
I2C address: 0x3C (ASW:OFF) or 0x3D (ASW:ON)
Dimensions PCB: 25.4x25.4mm
OLED: 27x19.5mm (Glass panel), 23x11mm (effective display area)
Mounting Holes: 2x M2.5
Operating Voltage: 3.3V

Resources:

Also available are PiicoDev Starter Kits - level up your projects by learning how to use a wide range of modern sensors and outputs.

Note: This module may arrive with a protective film over the display. Carefully remove this film before use for the most pleasing results.

PiicoDev OLED Display Module (128x64) SSD1306

PiicoDev Overview

PiicoDev is a ecosystem designed for rapid prototyping and maker education. The range includes:

Here are some of the features we have baked into PiicoDev:

Unified MicroPython libraries. The same MicroPython code examples will work on all supported platforms.
Simple-and-expandable connections. Modules can be connected using a 4-pin connector and daisy-chained to expand projects.
Breakout pins. Every module has a breakout section for optional advanced uses.
Consistent size. We have taken care to ensure modules are consistent sizes so that they easy for 3D printing cases, stacking and experimenting with.
Creative freedom. Simmer all of these features together and you end up with lots of creative freedom while still being a hands-on electronics experience.

PiicoDev electronics modules are designed and manufactured in Newcastle. They are priced for makers and education alike (affordable!). Get in touch with us if you have any questions.

"PiicoDev" and the PiicoDev Logo are trademarks of Core Electronics Pty Ltd.

This product is listed in:

PiicoDev>Outputs>Displays
PiicoDev>Outputs
Raspberry Pi>Pico>Displays
Displays & Screens>Graphic

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

$3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
$7+ for Standard Post (typically 6+ business days, tracked)
$11+ for Express Post (typically 2+ business days, tracked)
Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

$12+ for Pack and Track (3+ days, tracked)
$16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!