Search results for: 'arduino sensor'

The ease of use of a Nano board with the addition of secure IoT and BT connectivity.

PIR sensors allow you to sense motion, almost always used to detect whether a human has moved in or out of the sensors range. They are small, inexpensive, low-power, easy to use and don't wear out. For that reason they are commonly found in appliances and gadgets used in homes or businesses. They are often referred to as PIR, "Passive Infrared", "Pyroelectric", or "IR motion" sensors.

The Grove Water Level Sensor is a very accurate sensor that can be helpful in water level sensing applications. It is completely waterproof and uses...

After tens of millions of years of evolution, chameleons have formed a biological instinct where they can change the color of their skin to match their environment. This technique has enabled them to avoid detection from predators.

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog...

Infrared IR proximity distance sensor can detect the presence of an object within a distance of 10±5mm to 80±20mm, can be embedded in detection devices...

This sensor can detect flexing or bending in one direction. They were popularized by being used in the Nintendo PowerGlove as a gaming interface. These sensors are...

DFRobot sensor set. Made up of light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale

If you want to start playing with sensors, this kit will be the perfect choice for you to get started.

The RS485 all-in-one weather sensor measures wind speed & direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise...

This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped...

The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect...

Measure temperature and humidity for environmental monitoring, indoor climate control, and many IoT applications!

The soil sensor can accurately measure soil temperature and moisture. It communicates data via the MODBUS-RTU protocol over RS485. With IP68 protection...

IR is widely used in remoter control. With this IR receiver, the Arduino project is able to receive command from any IR remoter controller if you have the right decoder.

This is an Arduino-compatible TDS sensor/Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. It can be applied to domestic water...

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much smaller than most PIR modules, which makes it great for unobtrusive projects. It's also fully-contained - only needs power and ground, and it's breadboard or perfboard friendly.

The C1001 mmWave Human Detection Sensor is a cutting-edge 60GHz millimeter-wave radar sensor designed for precise human fall detection and sleep detection...

Get precise 7-in-1 weather data: ultrasonic wind, temp, humidity, rain & more with this RS485 station. Modbus & Arduino ready. Start robust monitoring!...

The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers.

This module integrates high-precision gyroscopes, accelerometer, microprocessor of high-performance and advanced dynamics solves and Kalman filter algorithms that...

Here comes DFRobot's new Analog Ambient Light Sensor. Brand new design and much more convenient to use.

The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time.

This capacitive liquid sensor with adjustable sensitivity can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil,...

Now, it is time to add a more fancy interactive way to your project. This DFRobot touch kit comes with three types touch sensors. An ipod styple wheel touch, a keypad touch which supports backlit and a grid touch pad which can recoginze something unique.

PIR sensors are used to detect motion from pets/humanoids from about 5 meters away (possibly works on zombies, not guaranteed). This sensor is much...

Weight Sensor Module is based on HX711, which is a precision 24-bit analog-to-digital convertor designed for weight scale and industrial control applications to interface directly with a bridge sensor. It not only has a few basic functions, but also contains high integration, fast response, immunity, and other features. This weight sensor lowers the cost of the electronic scale, and at the same time improving the performance and reliability. The input interface is compatible with Arduino I/O port. The output adopts compact terminal that makes the sensor easier to connect. It's the best choose for electronic enthusiast to do some tiny home scale.

The Grove - Laser PM2.5 Sensor (HM3301) is a new generation of air quality sensor, which is used for continuous and real-time detection of dust in the air. With its stable output, low noise, and ultra-low power consumption, it is suitable for air conditioners, intelligent air purifiers, and other air quality-related IoT projects.

Learn to Plug, Sketch and Play with basic Grove sensors, actuators and Arduino. All the modules are pre-wired on the PCB, just connect your Arduino Board to the Shield and start your measurements!

DHT11 upgraded version, data accuracy, stability, response speed, measurement range are greatly improved up...

The DFRobot 3D gesture sensor is an interactive sensor that integrates 3D gesture recognition and motion tracking. This sensor can be used to detect clockwise/counterclockwise rotation and movement directions.

Grove - SCD30 CO2 & Temperature & Humidity Sensor for Arduino is based on Sensirion SCD30, it is a Non-Dispersive Infrared(NDIR) carbon dioxide sensor...

Line tracking is the most basic function of smart mobile robot. As you can see line tracking robot matches everywhere. We designed this new generation of line tracking sensor to be your robot's powerful copilot all the way. It will guide your robot by telling white and black quickly and correctly, via TTL signal.

The flame sensor can be used to detect fire or other wavelength at 760 nm ~ 1100 nm light. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source or football. It can make use of fire-fighting robots, soccer robots.

Features Low cross-sensitivity to alcohol Standard formaldehyde measurement range: 0 ~ 1000 ppb Long-term stability and 6 years’ service...

This is an anti-rust, robust and precise SHT1x sensor, which can master enterprise-class and industrial-level applications.

DS18B20 is a digital temperature sensor which is from DALLAS U.S. It can be used to quantify the environmental temperature testing.

Get this vibration sensor to build a burglar alarm system to protect your property! This cost-effective vibration sensor, characterized by high sensitivity, fast...