



Capture true colour during the day and clear infrared footage at night without swapping hardware, featuring an automatic motorised IR-cut filter and an interchangeable M12 lens mount.


Arducam B0332 is a new member of the Arducam's USB camera family. It's a 1MP, based on the 1/4" monochrome global shutter OV9281 image sensor.

A camera enclosure case designed for 25*24mm, v1/v2 and the official camera module V3 boards (Standard, Wide, NoIR and NoIR Wide).

The CSI-HDMI adapter board is designed for Raspberry Pi Camera Module 3/V1/V2/HQ, to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.

A Time of Flight camera module featuring a MIPI-CSI 2 connection and offering up to 4-meter measuring range with sub-2cm precision, designed and optimized exclusively for Raspberry Pi & Nvidia Jetson boards.


Extend your Raspberry Pi camera connection up to 15 meters.

Arducam 2MP IMX462 Motorized IR-CUT Camera is capable of capturing visible and near-infrared images with very low noise even in extremely low-light conditions or no light (near 0 lux).

This is an ArduCam 5MP Camera Module for the Raspberry Pi with controllable motorized autofocus, it uses the same interface as the official Raspberry Pi Cameras.

This adapter module allows you to connect more cameras to your Pi via the CSI connections, multiplexing one socket to four.

It can move the camera for pan and tilt directional control, and that means a single camera can be used to monitor places that should be covered by multiple ones.

Fisheye, Wide Angle, Telephoto M12 Camera Lenses with Lens Adapter


The ArduCam B0385 is a 1MP 120fps OV9782 USB 2.0 camera board. As it is UVC compliant, native drivers built into Windows, Mac, as well as most Linux distros work out of the box.

Sony STARVIS sensitivity for Raspberry Pi projects that need to keep seeing after sunset. Switchable IR-cut, 1080p60 over MIPI CSI-2.

Features best-in-class near-infrared (NIR), quantum efficiency (QE), and a V2-like form factor.




Explore the versatile ArduCAM USB3.0 Camera Shield Plus, a high-performance USB camera control board for PCs and embedded systems, supporting a wide range of camera modules up to 21MP, featuring advanced MIPI camera support and enhanced USB3.0 bandwidth for robust imaging solutions.


This is a mini 5MP Arducam camera module compatible with the Raspberry Pi, model number OV5647

Just like the Raspberry Pi official camera V2, this camera module is equipped with a high-definition IMX219 8MP sensor for shooting HD video and still images.

This IMX291 is a 2MP CMOS USB camera with a pre-installed IR-filtering 160° wide-angle M12 lens

ArduCam boards are primarily Raspberry Pi alternative camera boards that you can use with your onboard CSI connectors. This camera is no exception, boasting an ultra-wide 175 Degree FOV while maintaining a solid 8MP with the built-in IMX219.

This 8MP 4K Autofocus USB Camera is based on a 1/4” 8MP IMX219 image sensor, autofocus, UVC compliant USB 2.0 cameras.

It is based on the 1/2.8" IMX298 image sensor, UVC-compliant, autofocus USB 2.0 camera and microphone.

The same form factor as the official Raspberry Pi Cameras with 64 MP!

This OV5647 camera module with autofocus capabilities and an extremely large adjustable focal-distance range is perfect for short to mid-range photography and image recognition projects.

Time to enjoy a smooth upgrade for your Raspberry Pi to the 12MP HQ camera!


Shoot high-speed moving objects in crisp sharp images. Avoid the rolling artifacts to get a much more accurate complete picture than the rolling shutter cameras.

This IMX219 breakout is a USB 2.0, UVC compliant CMOS webcam suitable for shooting video and still photos with an onboard 8 megapixel camera.

A resolution of 16 megapixels (compared to 8MP and 12MP), an autofocus lens, and a V2-like form factor.

The Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Pivariety camera modules make users get better performance and a wider variety of camera and lens options.

This High-Quality camera module for Jetson Nano/Xavier NX/Raspberry Pi.
Makers love reviews as much as you do, please follow this link to review the products you have purchased.