Search results for: 'weather sensor'

Accurately measure temperature and humidity with the DHT22 module. Ideal for DIY weather stations or automatic plant watering systems. Only one pin required for temperature and humidity readings.

The module can detect surrounding environment of the humidity and temperature.

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects...

This waterproof SMD DS18B20 temperature sensor provides 9-bits to 12-bit (configurable) temperature measurement and communicates over a 1-Wire bus that by...

This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex. Its technology ensures the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages.

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor...

The I2C Temperature & Humidity Sensor (Stainless Steel Shell) adopts 304 stainless steel for its housing to ensure good impact resistance, heat...

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog...

BME688 sensor detects VOCs, temp, humidity, pressure. Supports Arduino/IoT via I2C/SPI. AI gas analysis for air quality & smart homes...

Arduino Gravity: Tipping bucket rainfall sensor is the perfect tool for measuring rainfall. With no electronic components inside and a hollow bottom...

Whether you're an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a really rewarding project. When...

The RS485 all-in-one weather sensor measures wind speed & direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise...

The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...

This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable digital processing...

The waterproof digital IP68 waterproof light sensor with 0-200k lux range and Modbus-RTU 485. For industrial, automotive, outdoor lighting measurement...

An anemometer measures wind speed. The wind moves the cups on the anemometer, which rotates an enclosed magnet. The magnet closes a reed switch on each...

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface.

Linear analogue output Temperature Sensor.

Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...

Get precise 7-in-1 weather data: ultrasonic wind, temp, humidity, rain & more with this RS485 station. Modbus & Arduino ready. Start robust monitoring!...

This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The...

The SHT4X is the 4th generation digital temperature and humidity sensor from Sensirion. In line with Sensirion’s industry-proven humidity and temperature...

The Grove-Temperature&Humidity&Pressure&Gas Sensor(BME680) is not just a simple Arduino temperature sensor or barometer sensor but is a multiple function sensor that can measure temperature, pressure, humidity, and gas at the same time.

Gravity BME688 Environmental Sensor is a compact MEMS sensor that provides accurate measurements of temperature, humidity, barometric pressure, and VOC,...

This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code...

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer...

IP67-rated RS485 solar radiation sensor measures 400-1100nm solar energy. Modbus-RTU protocol, 5-30V DC. Perfect for photovoltaic systems & crop monitoring...

This smart rain sensor offers a fast way to detect rainfall change on glass in real time free from effects like sunlight, dust, leaves, etc., and feeds...

The SparkFun BME280 Atmospheric Sensor Breakout is an easy way to measure barometric pressure, humidity, and temperature readings, all without taking up too much...

An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure...

The wind direction sensor is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and...

Have you ever had the urge to rush out into your shed and build your own weather station? Well, this weather station kit includes an anemometer (for wind speed measurements), wind vane (for wind direction) and rain bucket (for rainfall measurements).

Grove - SCD30 CO2 & Temperature & Humidity Sensor for Arduino is based on Sensirion SCD30, it is a Non-Dispersive Infrared(NDIR) carbon dioxide sensor...

Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition.