Search results for: &#039;raspberry pi relay&#039;

A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.

$3.95 AUD, inc GST

5V 4 Channel Relay Module 10A

A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC

$6.40 AUD, inc GST

Bring programmable switching to a DIN rail - high-power relays, isolated field inputs and a wired network connection in one unit.

$71.22 AUD, inc GST

1 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a single channel solid state relay that can be switched with 3-5VDC

$4.70 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays (Assembled)

The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 12 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC12 and are rated for up to 10 A under most conditions.

$23.90 AUD, inc GST

4 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 4 channel solid state relay that can be switched with 3-5VDC

$15.35 AUD, inc GST

Power + Relay HAT for Raspberry Pi Zero

The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...

$42.95 AUD, inc GST

Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display.

Pimoroni Automation HAT Mini for Raspberry Pi Zero

Brand: Pimoroni

$48.15 AUD, inc GST

PicoRelay8 for Raspberry Pi Pico

The PicoRelay8 allows eight 28V DC/10A Normally Open relays to be controlled using a Raspberry Pi Pico. Each relay is controlled by a Pico GPIO pin -...

$45.95 AUD, inc GST

Irrigation Board for Raspberry Pi Pico

Looking to build a Raspberry Pi Pico based smart irrigation system? The Raspberry Pi Pico Irrigation Board is just what you need! This board allows the...

$58.40 AUD, inc GST

Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)

The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 5 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC5 and are rated for up to 10 A under most conditions.

$27.40 AUD, inc GST

MOSFET Power Switch Module

Add power control to your projects with this MOSFET module.

$1.35 AUD, inc GST

5V 2 Channel Relay Module 10A

A versatile relay board with opt-isolated inputs. Each channel can drive up to 10A @28VDC

$5.70 AUD, inc GST

8-ch Ethernet Relay Module

8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits, Industrial Grade...

$68.05 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module with RS485 Interface

Industrial Modbus RTU 8-ch Relay Module with RS485 Interface, Multi Isolation Protection Circuits, 5V Power Supply...

$53.40 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module (D)

Industrial Modbus RTU 8-ch Relay Module (D) With Digital Input and RS485 Interface, Multi Isolation Protection Circuits, 7~36V Power Supply...

$61.80 AUD, inc GST

Relay Module V2 (Arduino Compatible)

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

$4.60 AUD, inc GST

USB Power Switch (Dual)

Turn two of your USB devices on/off using a remote switch or a Raspberry Pi, Arduino and other microcontrollers! This is a dual-USB version of our popular...

$8.95 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.

$14.70 AUD, inc GST

Modbus RTU 32-Ch Relay Module

Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case

$119.95 AUD, inc GST

52Pi Raspberry Pi Pico MicroPython Sensor Kit (Pico Included)

Brand: 52Pi

Over twenty sensors, displays and actuators on one breadboard - go from first blink to a working project without buying another module.

$112.22 AUD, inc GST

Gravity: Easy Relay Module

The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting...

$13.66 AUD, inc GST

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller?...

SparkFun Qwiic Single Relay

Brand: Sparkfun

$30.90 AUD, inc GST

Out of stock

Dual Ethernet 8-Channel Relay Module (C) - Modbus RTU/TCP, PoE, 8 Digital Inputs

Industrial-grade switching for DIN-rail panels, controlled over Ethernet and powered from the same cable via POE.

$81.57 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.

$13.20 AUD, inc GST

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC5 5 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.

$13.05 AUD, inc GST

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control...

Adafruit Non-Latching Mini Relay FeatherWing

Brand: Adafruit

$14.55 AUD, inc GST

16A Relay Module (Arduino Compatible)

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit.It is actually "automatic switch" ,using a small electric current to control a larger current.

$16.18 AUD, inc GST

The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another...

SparkFun Qwiic Quad Relay

Brand: Sparkfun

$61.75 AUD, inc GST

Out of stock

Modbus RTU 8-ch Latching Relay Module (C) with RS485 Interface, Multi Isolation Protection Circuits, Rail-mounted Case

Modbus RTU 8-ch Latching Relay Module (C) with RS485 Interface, Multi Isolation Protection Circuits, Rail-mounted Case...

$64.15 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module (E) with RS485 Interface

Industrial Modbus RTU 8-ch Relay Module (E) with RS485 Interface, 30A High Current, Multi Isolation Protection Circuits, Onboard Optocoupler Isolation,...

$90.70 AUD, inc GST

Industrial 4-Channel Relay Module

The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600...

$52.48 AUD, inc GST

A hardware-based approach to remoting into a machine via a Raspberry Pi, it allows for remote power cycling, keyboard, video and mouse interactions directly via the Pi!

PiKVM v3 HAT for Raspberry Pi 4

Brand: HiPi.io

$244.95 AUD, inc GST

Out of stock