Search results for: 'm5stack tough'

A 16-bit self-calibrating analog-to-digital converter that operates on I2C

HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different IIC addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)

The Battery extension module is a 750mAh battery ADD-ON.

This universal connector for your M5 Stack, connects to GROVE, commonly used of this part is for the RGB LED strip extension.

Explore M5Stack's Smart QR & Barcode Scanner Unit featuring a 640x480 CMOS sensor, integrated STM32F030 MCU, and versatile I2C/UART communication for effortless scanning of QR codes and barcodes in retail, logistics, and manufacturing applications.

DescriptionCAMS3 5MP Unit is a streamlined camera module based on the ESP32S3, supporting WiFi cloud image transmission. It features 8M PSRAM and 16M...

It's used to convert the TTL standard to the RS485 standard. If the outside serial device is RS485 standard, you can attach this unit onto M5stack, therefore, to implement the communication with RS485 device by TTL protocol.

Discover the M5Stack Magnetic USB-C Cable with smart magnetic connector, offering convenient 5V data transmission and device protection in a durable 1-meter design for Type-C compatible devices.

HEART is built using the MAX30100 chipset. MAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external hardware components are needed for integration into a wearable device.

COMMU is a Muti-Communication-Interface-Converter. Integrated with 2IIC, 1TTL, 1CAN, 1RS485. Apparently COMMU has packed with most of series communications.

COM.LTE(4G) is a stackable multifunctional LTE communication module, built-in LTE communication module SIM7600G, supports LTE-TDD/LTE-FDD/WCDMA and GSM frequency bands, supports LTE.CAT4 (downlink speed is 150Mbps), supports voice calls SMS with SMS.

Discover the M5Stack Magnetic Battery Base 110mAh, a versatile expansion module featuring magnetic attachment, battery switch, and pin headers for M5Stack Basic/Core2/CoreS3 development boards.

COM.GPS is a satellite positioning module in the M5Stack stacking module series. It is developed based on the NEO-M8N module and is equipped with an active antenna. The NEO-M8 can spend a small amount of time, conduct high-sensitivity acquisition, and keep the system low power consumption. NEO-M8N integrates the 72-channel u-blox M8 GNSS engine, supports multiple GNSS systems: BeiDou, Galileo, GLONASS, GPS / QZSS, allowing simultaneous reception 3 Data from a GNSS system.

Explore M5Stack's USB v1.2 Module featuring MAX3421E chip, offering USB 2.0 host/peripheral functions with SPI communication, GPIO expansion, and universal compatibility for industrial, educational, and smart home applications.

STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control.

This universal connector for your M5 Stack, connects to pin, commonly used of this part is for the RGB LED strip extension.

Explore the M5Stack AirQ Environmental Monitor Kit, a comprehensive IoT device that measures PM2.5, CO2, VOC, temperature, and humidity with an e-ink display and cloud connectivity for real-time air quality monitoring.

Core BOTTOM is the bottom part of M5Core like M5Basic and M5 GRAY, with M-BUS socket and extend pins on the side, also include a Lipo battery . If you want to buy these bottoms separately, you can get it from here.

Core BOTTOM is the bottom part of M5Core like M5Basic and M5 GRAY, with M-BUS socket and extend pins on the side, also include a Lipo battery . If you want to buy these bottoms separately, you can get it from here.

Discover the M5Stack Programmable DC Power Supply Module offering precise 0.5-30V/5A output with isolation protection, perfect for scientific research, embedded development, and DIY electronics projects requiring adjustable power up to 100W.

ANGLE is a rotary switch Unit which simply includes a 10K Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed.

Explore the M5Stack Mini CAN Bus Module, a compact communication module featuring high-speed data transfer up to 5Mbit/s, CAN FD protocol support, and wide voltage input range of 5-24V for automotive and industrial applications.

Explore the M5Stack 4-Channel Smart Motor Driver STM32, a versatile encoder motor control module featuring STM32+BL5617 technology, supporting multiple control modes and real-time power monitoring for robotics and automation applications.

Explore the M5Stack DIY MIDI Music Synthesizer Unit featuring SAM2695 audio synthesis chip, multi-channel instrument output, and built-in Class D amplifier for electronic music production, live performances, and STEAM education projects.