Search results for: 'flow sensor'
Showing results for flow sensor
Helpful resources
1
Water Flow Sensor - 1/2"
Brand: DFRobot
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S201 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow. When liquid flows through the sensor, a magnetic rotor will rotate and the rate of rotation will vary with the rate of flow. The hall effect sensor will then output a pulse width signal. Connect it to a microcontroller and you can monitor multiple devices such as your coffee maker, sprinkler or anything else, and control the water flow rate to suit your needs!
$17.25 AUD, inc GST
Gravity: Digital Water Flow Sensor For Arduino - 1/8
Brand: DFRobot
The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect...
$17.05 AUD, inc GST
Gravity: Liquid Flow Sensor (G3/4)
Brand: DFRobot
This Gravity: electromagnetic-based liquid flow sensor can measure the flow of various liquids like water, diesel, engine oil, milk, paint, detergent, and...
$34.70 AUD, inc GST
G3/4 Water Flow Sensor (Seeed Studio)
Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$36.30 AUD, inc GST
Clear Turbine Water Flow Sensor with 3-pin JST
Brand: Adafruit
Measure liquid/water flow for your solar, computer cooling, or gardening project using this handy basic flow meter featuring a fully clear plastic body. This sensor sits in line with your water line and uses a pinwheel sensor to measure how much liquid has moved through it.
$13.30 AUD, inc GST
G 1/2" Water Flow Sensor (Seeed Studio)
Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$22.70 AUD, inc GST
M11x1.25 Water Flow Sensor (Seeed Studio)
Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$21.25 AUD, inc GST
G1/8 Water Flow Sensor (Seeed Studio)
Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$22.50 AUD, inc GST
Gravity: Liquid Flow Sensor (G1/2)
Brand: DFRobot
This Gravity: electromagnetic-based liquid flow sensor can measure the flow of various liquids like water, diesel, engine oil, milk, paint, detergent and...
$34.20 AUD, inc GST
Gravity: Liquid Flow Sensor (G1/4)
Brand: DFRobot
This Gravity: electromagnetic-based liquid flow sensor can measure the flow of various liquids like water, diesel, engine oil, milk, paint, detergent and...
$33.50 AUD, inc GST
Reed Switch
Brand: Sparkfun
This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed, the reeds separate and the switch opens. This makes for a great non-contact switch. This switch can carry up to 1.2A.
$3.80 AUD, inc GST
Gravity: 0-10V 15-Bit Dual-Channel High-Precision ADC Module for Arduino / Raspberry Pi / ESP32
Brand: DFRobot
15-bit high-precision 0-10V ADC module with dual I2C/UART interfaces. Designed for Arduino, Raspberry Pi, and ESP32. For industrial automation &...
$21.35 AUD, inc GST
Water Turbine Generator (5VDC)
Brand: DFRobot
This is a water turbine generator, 5V DC output, which can be directly used as Arduino power supply. Eco-friendly energy, you can make it work together with our...
$16.95 AUD, inc GST
G1/2 Water Flow Sensor Enclosure (Seeed Studio)
Brand: Seeed Studio
Water flow sensor consists of a plastic valve body, a water rotor, and a hall-effect sensor. When water flows through the rotor, rotor rolls. Its speed...
$20.60 AUD, inc GST
F1031V Mass Air Flow Sensor
Brand: DFRobot
F1031V Mass Air Flow Sensor adopts thermodynamic principle to detect flow rate of gas medium in the flow channel, with high precision and good repeatability. It...
$179.95 AUD, inc GST
SparkFun Air Velocity Sensor Breakout - FS3000 (Qwiic)
Brand: Sparkfun
The SparkFun FS3000 Qwiic Air Velocity Sensor Breakout can help you accurately determine the speed and consistency of air moving around you...
$114.95 AUD, inc GST
Similar matches
Grove - Water Level Sensor (10cm) for Arduino
Brand: Seeed Studio
The Grove Water Level Sensor is a very accurate sensor that can be helpful in water level sensing applications. It is completely waterproof and uses...
$14.45 AUD, inc GST
Weather Meter Kit
Brand: Sparkfun
Whether you're an agriculturalist, a professional meteorologist or a weather hobbyist, building your own weather station can be a really rewarding project. When...
$154.95 AUD, inc GST
Non-contact Capacitive Liquid Level Sensor
Brand: DFRobot
This is a non-contact liquid level sensor with status indicator and adjustable sensitivity. It can be used in liquid detection of non-metallic container or pipe(outer...
$20.80 AUD, inc GST
Gravity: Throw-in Type Liquid Level Transmitter
Brand: DFRobot
This throw-in type liquid level transmitter adopts high-performance pressure sensing chip, with advanced circuit processing and temperature compensation technology...
$87.50 AUD, inc GST
Anemometer
Brand: Sparkfun
An anemometer measures wind speed. The wind moves the cups on the anemometer, which rotates an enclosed magnet. The magnet closes a reed switch on each...
$22.70 AUD, inc GST
Grove - Water Sensor (Seeed Studio)
Brand: Seeed Studio
Grove - Water Sensor detects the presence of water using exposed PCB traces. The sensor is made up of interlaced traces of Ground and Sensor signals. The...
$5.90 AUD, inc GST
Simple Water Detection Sensor with Digital Output
Brand: Adafruit
Keep wet things wet and dry things dry by detecting when the dry things get wet by accident! This palm-sized cherry-red water sensor is simple and easy to implement in your wet-dry-sensing project.
$4.10 AUD, inc GST
Gravity: Tipping Bucket Rainfall Sensor - I2C & UART
Brand: DFRobot
Arduino Gravity: Tipping bucket rainfall sensor is the perfect tool for measuring rainfall. With no electronic components inside and a hollow bottom...
$54.85 AUD, inc GST
Gravity: Analog Turbidity Sensor
Brand: DFRobot
The turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.
$16.40 AUD, inc GST
M5Stamp Fly with M5StampS3
Brand: M5Stack
M5Stamp Fly is a programmable open-source quadcopter kit, featuring the StampS3 as the main controller.
$119.95 AUD, inc GST
Anemometer Wind Speed Sensor w/Analog Voltage Output
Brand: Adafruit
An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure...
$109.95 AUD, inc GST
Anemometer Kit (0-5V)
Brand: DFRobot
Ever want to build your own weather station? This anemometer is made of shell, wind cups and circuit module. It has built-in photovoltaic module, industrial microcomputer processor, and standard current generator. Made with aluminium alloy, the anemomter is of high strength, weather resistance and corrosion resistance. The millitary quality interface ensures long life of this anemometer, at the same time enhancing the accuracy of wind speed acquisition.
$94.95 AUD, inc GST
Gravity: PAV3015 Air Velocity Sensor (0-15 m/s, I2C)
Brand: DFRobot
Get accurate (±5%) air velocity data with the Gravity: PAV3015 Sensor. This compact, fast-response (125ms) anemometer uses I2C for Arduino, ESP32, or RPi....
$88.90 AUD, inc GST
Pimoroni PMW3901 Optical Flow Sensor Breakout
Brand: Pimoroni
This fancy optical flow sensor detects the motion of surfaces in front of it, from ~80mm to infinity! It's great for DIY drone builds, and it's compatible with Pimoroni's new Breakout Garden HAT with SPI.
$50.35 AUD, inc GST
12" eTape Liquid Level Sensor + extras
Brand: Adafruit
The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats...
$74.20 AUD, inc GST
SparkFun Qwiic MicroPressure Sensor
Brand: Sparkfun
The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor...
$72.35 AUD, inc GST
Capacitive Liquid Level Sensor for Arduino
Brand: DFRobot
This capacitive liquid sensor with adjustable sensitivity can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil,...
$99.70 AUD, inc GST
Weather Station with Anemometer/Wind Vane/Rain Bucket
Brand: DFRobot
Have you ever had the urge to rush out into your shed and build your own weather station? Well, this weather station kit includes an anemometer (for wind speed measurements), wind vane (for wind direction) and rain bucket (for rainfall measurements).
$279.95 AUD, inc GST
12" Standard eTape Liquid Level Sensor with Plastic Casing
Brand: Adafruit
This eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats...
$129.95 AUD, inc GST
8" eTape Liquid Level Sensor + extras
Brand: Adafruit
The eTape Liquid Level Sensor is a solid-state sensor with a resistive output that varies with the level of the fluid. It does away with clunky mechanical floats...
$73.70 AUD, inc GST
Liquid Level Sensor for Water Level, Oil Level and Mild-corrosive Liquid Level Monitoring
Brand: Seeed Studio
Industrial-grade liquid level sensor, featuring small-size, light-weight, and robustness, ensuring high sensitivity, high accuracy and high performance...
$224.95 AUD, inc GST
Gravity: 5V Non-contact Liquid Level Sensor
Brand: DFRobot
This small 5V non-contact liquid level sensor with Gravity Interface is able to detect 0-100°C conductive liquid levels in non-metallic containers in sensing range...
$16.90 AUD, inc GST
Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP
Brand: DFRobot
Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP can be calibrated to known air pressure for quick measurement of pipeline air pressure values...
$92.05 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.