xTool LED Display Stand for K9 Rectangle Crystal
A warm-lit hardwood base that turns a finished K9 crystal engraving into a display piece worth putting on the shelf.
In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow*
Disclaimer:
For next-day delivery, the shipping address must
be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed
before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost
pickup timings and order verifications. eParcel Express is typically a 1-day service within the
AusPost next-day network, though it is sometimes 2+ days.
A machined hardwood base with a warm LED underneath, built to light an engraved K9 Rectangular Crystal from below.
Internal engraving in K9 glass is not so visible under ordinary room lighting, the detail is there, but there is nothing behind it to catch. Lighting the block from underneath solves exactly that, the warm white light scatters through the engraving and makes the 3D really show through.
The body is hardwood at 80 × 80 mm, small enough for a desk, shelf or display cabinet without looking like a tacky trinket. Power is USB-A, so it runs from a laptop, a wall adapter or a power bank with nothing to solder.
It suits work coming off the xTool F2 Ultra UV laser engraver, where UV inner engraving puts the image inside the crystal rather than on its surface. Portraits, logos, awards and personalised keepsakes all benefit - anything where depth is the point.
Features
- Warm LED lighting picks out fine engraved detail that room light misses, giving portraits and photo engravings visible depth.
- Groove machined to the K9 Rectangle Crystal footprint, so the block seats square and stable without shims or adhesive.
- USB-A powered — plug it into a laptop, wall adapter or power bank, with no batteries to run flat mid-display.
- Compact 80 × 80 mm footprint suits desks, reception counters and display cabinets.
- Official xTool part, so the groove tolerance matches the crystal xTool actually ships — no guesswork on fit.
What's Included
- 1x LED display stand for rectangular crystal
Note: The K9 rectangular crystal is not included and must be purchased separately.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
40 Aruma Place
Cardiff
NSW, 2285
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Videos
View AllGuides
xTool P3 First Time Cutting Quick Start Guide
Setting Up Your xTool P3 | From Unboxing to First Cut
xTool P3 Overview | A New Standard for Making?
The Maker Revolution
Projects
The Rats Nest VCC Desktop Power Supply
Remote-Controlled Mars Rover
FlipperMate: Hands-Free Pinball
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments