Search results for: 'arducam camera module'

Time to enjoy a smooth upgrade for your Raspberry Pi to the 12MP HQ camera!

This High-Quality camera module for Jetson Nano/Xavier NX/Raspberry Pi.

This is a mini 5MP Arducam camera module compatible with the Raspberry Pi, model number OV5647

This adapter module allows you to connect more cameras to your Pi via the CSI connections, multiplexing one socket to four.

The same form factor as the official Raspberry Pi Cameras with 64 MP! 

This OV5647 camera module with autofocus capabilities and an extremely large adjustable focal-distance range is perfect for short to mid-range photography and image recognition projects.

Raspberry Pi Camera: Designed for Raspberry Pi, this 8MP HD camera module has a Sony IMX219 8MP pixel sensor with an autofocus lens.

A camera enclosure case designed for 25*24mm, v1/v2 and the official camera module V3 boards (Standard, Wide, NoIR and NoIR Wide).

This camera is based on 8MP IMX179 USB Camera Module. The max resolution & frame rate is 3264(H)×2448(V)@30fps.

This IMX291 is a 2MP CMOS USB camera with a pre-installed IR-filtering 160° wide-angle M12 lens

Extend your Raspberry Pi camera connection up to 15 meters.

Features best-in-class near-infrared (NIR), quantum efficiency (QE), and a V2-like form factor.

The CSI-HDMI adapter board is designed for Raspberry Pi Camera Module 3/V1/V2/HQ,  to extend the camera over the long cables while keeping the high-speed CSI signals away from noise and interference.

Based on Sony’s IMX378 high-quality image sensor, Arducam IMX378 camera module is a ready-to-use embedded vision solution for the Raspberry Pi.

This is an ArduCam 5MP Camera Module for the Raspberry Pi with controllable motorized autofocus, it uses the same interface as the official Raspberry Pi Cameras.

Just like the Raspberry Pi official camera V2, this camera module is equipped with a high-definition IMX219 8MP sensor for shooting HD video and still images.

The most versatile camera made for microcontrollers.

Connect this camera adapter board to a PC, laptop, Android device, or Raspberry Pi via USB port to act as a webcam.

Capture clear, balanced footage in high-contrast lighting. This camera features the AR0230 sensor, which provides a reliable 105dB dynamic range and a manual focus M12 lens.

This IMX219 breakout is a USB 2.0, UVC compliant CMOS webcam suitable for shooting video and still photos with an onboard 8 megapixel camera.

This 8MP 4K Autofocus USB Camera is based on a 1/4” 8MP IMX219 image sensor, autofocus, UVC compliant USB 2.0 cameras.

This is a Arducam Mini High Quality Camera with M12 mount lens. Rated at 12.3MP 1/2.3″ 477P HQ for use with the Jetson Nano/Xavier NX/AGX Orin/Orin Nano/Orin NX

Here's a kit that Arducam has selected from a wide range of M12 mount optimal lenses from long focus to fisheye for shooting on your Raspberry Pi or Arduino cameras.

The Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Pivariety camera modules make users get better performance and a wider variety of camera and lens options.

In order to meet the increasing market demands for more lens options to address different use cases, ArduCam selected and tested a wide range of M12 mount optimal lenses from long focus to fisheye for shooting on your Raspberry Pi or Arduino cameras

A resolution of 16 megapixels (compared to 8MP and 12MP), an autofocus lens, and a V2-like form factor.

Capture true colour during the day and clear infrared footage at night without swapping hardware, featuring an automatic motorised IR-cut filter and an interchangeable M12 lens mount.

It can move the camera for pan and tilt directional control, and that means a single camera can be used to monitor places that should be covered by multiple ones.

ArduCam boards are primarily Raspberry Pi alternative camera boards that you can use with your onboard CSI connectors. This camera is no exception, boasting an ultra-wide 175 Degree FOV while maintaining a solid 8MP with the built-in IMX219.

Arducam B0332 is a new member of the Arducam's USB camera family. It's a 1MP, based on the 1/4" monochrome global shutter OV9281 image sensor.

A Time of Flight camera module featuring a MIPI-CSI 2 connection and offering up to 4-meter measuring range with sub-2cm precision, designed and optimized exclusively for Raspberry Pi & Nvidia Jetson boards.