Arducam 5MP Plus OV5642 Mini Module Camera

SKU: AC-B0068 Brand: Arducam
Arducam-Mini-5MP-Plus(OV5642) is performance improved version compared to its predecessor Arducam-M-5MP.
$75.10 AUD, inc GST
$68.27 AUD, exc GST

In stock, ships same business day if ordered before 2PM
Delivered by Tue, 14th of May

Quantity Discounts:

  • 6-12 $65.55 (exc GST)
  • 12+ $63.49 (exc GST)
- +

2 from local stock, 1 supplier stock; your order will dispatch between Dec 1 to Dec 10. And yes, stock levels and lead times are accurate!

Shipping:

  • $6+ Standard (5+ days*, tracked)
  • $10+ Express (2+ days*, tracked)
  • FREE Pickup (Newcastle only - must order online*)

Shipping costs may increase for heavy products or large orders.

Exact shipping can be calculated on the view cart page.

*Conditions apply, see shipping tab below.

Arducam-Mini-5MP-Plus(OV5642) is performance-improved version compared to its predecessor Arducam-M-5MP.
It not only offers the capability to add a camera interface that doesn’t have in some low-cost microcontrollers but also provides the capability to add multiple cameras to a single microcontroller.
Capture decent 5MP JPEG images and do 5MP full-resolution image capture, making it to be the ideal solution for IoT and scientific image processing applications.
Even more, it can record short movie clips as well.

  • Arducam Mini Module Camera Shield 5MP Plus OV5642 Camera Module is a general purpose high definition 5MP SPI camera, which reduces the complexity of the camera control interface
  • It integrates 5MP CMOS image sensor OV5642 and provides miniature size, as well as the easy-to-use hardware interface and open source code library
  • The Arducam mini can be used in any platform like Arduino, Raspberry Pi, ESP8266, Maple, Chipkit, or Beaglebone black, as long as they have SPI and I2C interface and can be well mated with standard Arduino boards
  • Support JPEG compression mode, single and multiple shoot mode, short movie recording, one-time capture multiple read operation, burst read operation, low power mode and etc.
  • It can be used in IoT, Robot, Wildlife, HDR, and Other battery-powered products or scientific image processing applications

Application

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Other battery-powered products
  • Can be used in MCU, Raspberry Pi, ARM, DSP, and FPGA platforms

Features

  • 5MP image sensor OV5642
  • M12 mount or CS mount lens holder with changeable lens options
  • IR sensitive with proper lens combination
  • I2C interface for the sensor configuration
  • SPI interface for camera commands and data stream
  • All IO ports are 5V/3.3V tolerant
  • Well mated with standard Arduino boards
  • Provide open source code library for Arduino, STM32, Chipkit, Raspberry Pi, BeagleBone Black
  • Small form of factor
  • Output Format: JPEG RGB RAW8

Key Specifications

  • Power supply 3.3V~5V
  • Active array size: 2592×1944
  • SPI speed: Max 8MHz
  • Shutter: rolling shutter
  • Frame buffer: 8MByte
  • Pixel Size: 1.4µm x 1.4µm
  • Default M12 Lens: 60°
  • Resolution support:5MP, 1080p, 720p, VGA, QVGA
  • Format support: YUV, JPEG
  • Size: 34 x 24 mm
  • Weight: 20g
  • Temperature: -10°C~+55°C
  • Lens Specification: sensor size: 1/4″; EFL:4.9mm; F/N:2.2; BFL:1.2mm; HFOV: 60 degree (SKU: U6067)

Shipping List

  • 1pcs MINI Arducam module Camera Shield w/ 5 MP OV5642 for Arduino UNO Mega2560 board
  • 1pcs Dupont Cable

This product is listed in:

Sensors>Camera

Product Comments

Exact shipping can be calculated on the view cart page (no login required).

Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).

We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):

  • $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
  • $6+ for Standard Post (typically 6+ business days, tracked)
  • $10+ for Express Post (typically 2+ business days, tracked)
  • Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.

Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.

Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.

International Orders - the following rates are for New Zealand and will vary for other countries:

  • $11+ for Pack and Track (3+ days, tracked)
  • $16+ for Express International (2-5 days, tracked)

If you order lots of gear, the postage amount will increase based on the weight of your order.

Our physical address (here's a PDF which includes other key business details):

Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia

Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.

Have a product question? We're here to help!

Write Your Own Review

Videos

View All

Guides

Use a ESP32-CAM Module to Stream HD Video Over Local Network

Cameras in combination with artificial intelligence create arguably the most powerful sensor you ca...
Cameras in combination with artificial intelligence create arguably the most powerful sensor you ca...

Face and Movement Tracking Pan-Tilt System with Raspberry Pi and OpenCV

[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...
[Update – Until there is correct compatibility of OPEN-CV with the new Raspberry ...

The Maker Revolution

The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...
The Maker Revolution celebrates the creation of new devices and the modification of existing ones - ...

Getting Hands-on with Sensors

What good is a robot if it can’t interact with the environment around it? Sensors are the back...
What good is a robot if it can’t interact with the environment around it? Sensors are the back...

Projects

WhyzaGC - Feather ESP32 addon to the MightyOhm Gieger Counter

This project is about adding a wireless Adafruit Feather HUZZAH ESP8266 or ESP32 v2 with Adafruit F...
This project is about adding a wireless Adafruit Feather HUZZAH ESP8266 or ESP32 v2 with Adafruit F...
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.