Search results for: '4g lte antenna'
Learn
Waveshare 4G HAT for Raspberry Pi - Unlock Mobile Connectivity and GPS!
Getting Started With Walter | An ESP32 With 4G/5G and GPS!
Mobile Networks - Where Can My IoT Device Connect?
LTE Cat-M1 vs NB-IoT - 4G Connectivity Comparison with IoT Devices
How to Update Firmware on Pycom GPy & FiPy Cellular LTE
LTE Wide Band Flex Antenna (698–3000MHz)
Brand: SparkFun
This easy-to-install durable, polymer antenna operates on greater than 45% efficiency on LTE bands from 698MHz to 3000MHz...
$21.95 AUD, inc GST
Wide Band 4G LTE Internal FPC Antenna
Brand: SparkFun
A Wide Band, 700-2700Mhz frequency range, 4G LTE antenna provides a wide enough range for a number of applications including BLE & LoRa/RF. This antenna is 53mm...
$4.30 AUD, inc GST
LTE Antenna 175mm Duck SMA Male - VT4GLTE-R-10
Brand: SparkFun
This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands.
$21.55 AUD, inc GST
600-6000MHz 5G Antenna
Brand: DFRobot
These 5G antennas are designed for 5G modules and equipment that require high efficiency and peak gain to deliver excellent throughput for access points, terminals...
$13.03 AUD, inc GST
Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter...
$11.95 AUD, inc GST
Particle Wide Band Cell Antenna - LTE-M
Brand: Particle
Explore Particle's Wide Band LTE-M Cell Antenna featuring 698-2690MHz frequency range and 3.86 dBi gain, pre-certified for B-Series and E-Series modules with flexible polymer construction and U.FL connector.
$14.95 AUD, inc GST
Dipole Antenna
Brand: Arduino
GSM antenna (850/900/1800/1900 MHz ) that can be attached to the board with the micro UFL connector.
$10.95 AUD, inc GST
GSM Antenna with Magnetic Base (3m)
Brand: DFRobot
This is a GSM antenna with SMA connector. Its magnetic base can be easily adsorbed on the surface of ferrous material. The working frequency 900-1800 MHz meets the most requirements of GSM application. This Antenna extension cable uses 174 pure copper material, which has less impedance than the other cable. The antenna signal gain could arrive 2.5dBi. Its compact size makes it easy to carry and use.
$5.22 AUD, inc GST
Quad-band Cellular Duck Antenna SMA
Brand: SparkFun
This is a fantastic find for SFE. A small, high-quality, quad-band, standard SMA terminated, cellular antenna.
$15.10 AUD, inc GST
Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
Brand: Adafruit
This 2.4"/61mm long antenna has 2dBi of gain and 50O impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter...
$10.75 AUD, inc GST
Built-in Spring GSM Antenna
Brand: DFRobot
This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use.
$4.64 AUD, inc GST
Quad-band Wired Cellular Antenna SMA
Brand: SparkFun
A Quad-band antenna for embedded cellular devices. This antenna will allow you to connect your cellular module to the outside world. Operates on four frequencies. Comes with a 3M adhesive backing for mounting. Standard male SMA terminated.
$32.90 AUD, inc GST
SIM7600G-H 4G HAT (B) for Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support, GNSS Positioning, Global Band
Brand: Waveshare
Enabling LTE Cat-4 4G / 3G / 2G Communication & GNSS Positioning
$139.95 AUD, inc GST
Waveshare 4G HAT for Raspberry Pi (LTE Cat-4/4G/3G/2G/GNSS)
Brand: Waveshare
Enable LTE Cat-4 4G/3G/2G communication and GNSS Positioning for your Raspberry Pi
$139.95 AUD, inc GST
SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global Band
Brand: Waveshare
SIM7600G-H M.2 4G HAT For Raspberry Pi, LTE CAT4 High Speed, Global Coverage Multi Band, 4G/3G/2G Compatible, GNSS...
$139.95 AUD, inc GST
Clipper HAT Mini (LTE 4G for Raspberry Pi)
Brand: Pimoroni
Clipper enables your Raspberry Pi computer to receive and transmit data over 4G LTE cellular networks - perfect for remote or mobile projects....
$62.80 AUD, inc GST
75 MHz to 1 GHz telescopic antenna
Brand: Great Scott Gadgets
Telescopic 50 ohm antenna with a range of 75 MHz to 1 GHz with SMA male connector, adjustable 20-88 cm length and rotating elbow for flexible placement.
$49.30 AUD, inc GST
RTL-SDR BLOG V3 USB Dongle with Dipole Antenna Kit
Brand: SparkFun
The RTL-SDR BLOG V3 is a low-cost software defined radio USB dongle...
$184.43 AUD, inc GST
Clipper 4G LTE Cellular Breakout Board - SP/CE
Brand: Pimoroni
Connect your microcontroller to 4G LTE networks worldwide with the Clipper Cellular Breakout Board, featuring SP/CE compatibility, SMA antenna support, and seamless integration with Raspberry Pi and RP2040 devices.
$36.70 AUD, inc GST
SIM7600G-H-M2 4G Communication Module
Brand: DFRobot
The SIM7600G-H-M.2 is the LTE Cat 4 module which supports wireless communication modes of LTE-TDD, LTE-FDD, HSPA+, GSM, GPRS, EDGE, etc. It supports...
$100.21 AUD, inc GST
CAT4 SIM7600G-H 4G Communication and GNSS Positioning Module (Compatible with Raspberry Pi / LattePanda)
Brand: DFRobot
SIM7600G-H 4G CAT4 and GNSS positioning module, supports LTE-FDD, LTE-TDD, WCDMA, GSM, and can be used with Raspberry Pi and LattePanda SBCs for data,...
$140.15 AUD, inc GST
Clipper 4G LTE IoT Starter Kit - SP/CE Compatible
Brand: Pimoroni
Explore the Clipper 4G LTE IoT Starter Kit, a cellular connectivity solution for remote microcontroller projects featuring SP/CE compatibility, global SIM coverage, and seamless integration with Raspberry Pi devices.
$52.55 AUD, inc GST
300 MHz to 1100 MHz telescopic antenna
Brand: Great Scott Gadgets
Lightweight stainless-steel telescopic 50 ohm antenna with a range of 300-1100 MHz, perfect for any SDR or general RF projects.
$43.85 AUD, inc GST
CAT1 SIM7600G 4G Communication and GNSS Positioning Module (Compatible with Raspberry Pi / LattePanda)
Brand: DFRobot
SIM7600G, a 4G CAT1 and GNSS positioning module, supports LTE-FDD, LTE-TDD, WCDMA, GSM, and can be used with Raspberry Pi and LattePanda SBCs for data,...
$109.89 AUD, inc GST
Telescopic Antenna SMA - 300 MHz to 1.1 GHz (ANT700)
Brand: SparkFun
This ANT700 is a telescopic antenna designed for operation from 300 MHz to 1.1 GHz with a total length that is configurable from 9.5 cm to 24.5 cm. Each ANT700 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow.
$62.60 AUD, inc GST
CAT1 A7670G 4G Communication Module (Compatible with Raspberry Pi / LattePanda)
Brand: DFRobot
The A7670G-H 4G Communication Module, featuring Global Coverage and support for LTE-FDD/LTE-TDD/GSM, can be used as a network card for Raspberry Pi and...
$84.16 AUD, inc GST
Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi - 200mm
Brand: Adafruit
That's one slim cellular antenna! At 238mm long from tip to tip and and with a cable thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive...
$5.25 AUD, inc GST
Slim Sticker-type GSM/Cellular Quad-Band Antenna - 3dBi uFL
Brand: Adafruit
That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with...
$5.20 AUD, inc GST
Particle Taoglas Cellular PCB Antenna 2G/3G 2.4dBi
Brand: Particle
This penta-band GSM antenna from industry leader Taoglas is a great multi-purpose antenna for almost all cellular applications. It's compact size makes it convenient for design into small enclosures, and it features a rigid structure that ensures minimal gain loss during integration.
$614.95 AUD, inc GST
Quectel EM05-E LTE Cat 4 M.2 Module (Seeed Studio)
Brand: Seeed Studio
Quectel EM05-E is an LTE category 4 module adopting standard M.2 (NGFF) form factor. The space-saving M.2 form factor allows EM05-E to be easily integrated into smaller and thinner devices. With maximum data rates up to 150Mbps downlink and 50Mbps uplink, it is optimized specially for M2M and IoT applications.
$114.95 AUD, inc GST
Nagoya NA-773 antenna (Seeed Studio)
Brand: Seeed Studio
The Nagoya NA-773 antenna is a 50 ohm, SMA male connector telescopic antenna designed for handheld devices operating in 144MHz and 430MHz ranges, and offers...
$24.70 AUD, inc GST
M5Stack COM.LTE Module (SIM7600G)
Brand: M5Stack
COM.LTE(4G) is a stackable multifunctional LTE communication module, built-in LTE communication module SIM7600G, supports LTE-TDD/LTE-FDD/WCDMA and GSM frequency bands, supports LTE.CAT4 (downlink speed is 150Mbps), supports voice calls SMS with SMS.
$169.95 AUD, inc GST
LattePanda IOTA M.2 4G LTE Expansion Board (4G Module Not Included)
Brand: DFRobot
Enable 4G LTE cellular connectivity on your LattePanda IOTA with this M.2 B-Key expansion board. It supports 3042 4G modules and includes a Nano-SIM slot,...
$16.20 AUD, inc GST
Similar matches
RF Explorer H-Loop Near Field Antenna (RFEAN25) (Seeed Studio)
Brand: Seeed Studio
RF Explorer RFEAH-25 is a 25mm diameter, high performance near field H-Loop antenna. RFEAH-25 is a very sensitive, compact and easy to use H-loop near...
$52.85 AUD, inc GST
RF Explorer Near Field Antenna Kit (Seeed Studio)
Brand: Seeed Studio
RF Explorer Near Field Antenna Kit is a collection of high performance set of 4 antennas designed for the most demanding RF diagnosis tasks:
$169.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.