Clipper 4G LTE IoT Starter Kit - SP/CE Compatible
In stock, ships same business day if ordered before 2PM
Fastest delivery: Tomorrow*
Disclaimer:
For next-day delivery, the shipping address must
be in the AusPost next-day network, eParcel Express must be selected, and the order must be placed
before 2PM AEST Mon-Thurs excluding NSW Public Holidays. Orders may be delayed due to AusPost
pickup timings and order verifications. eParcel Express is typically a 1-day service within the
AusPost next-day network, though it is sometimes 2+ days.
Quantity Discounts:
- 6-12 $51.05 (exc GST)
- 12+ $50.00 (exc GST)
Restrictions apply to this RF Equipment for use in Australia:
- Only to be operated on 433Mhz / 915-930Mhz / 2.4Ghz (check the product description for compatible frequency ranges).
- If operating outside of shared frequencies or in such a way that is beyond low interference potential devices are intended to function, then you have obtained the appropriate authorisation to do so.
For use in other locations around the world:
- Follow region-specific frequency spectrum rules.
A declaration of use will need to be submitted during checkout.
Transform remote microcontroller projects with seamless cellular connectivity using the Clipper 4G LTE IoT Starter Kit. This innovative breakout solution enables reliable data transmission over 4G LTE networks, perfect for situations where WiFi isn't practical or available. Whether monitoring environmental sensors in remote locations, controlling automated systems beyond WiFi range, or deploying IoT devices at temporary installations, Clipper provides the connectivity solution.
Key Features
- SP/CE connector for plug-and-play compatibility with supported microcontrollers
- Global 4G LTE connectivity with support for 7 frequency bands (B1/B3/B5/B7/B8/B20/B28)
- LTE Cat 1 performance with 5Mbps uplink and 10Mbps downlink speeds
- Compact form factor: 35x29x5mm (11mm antenna connector height)
- Flexible power requirements: 3.7V - 6.0V input
- Energy-efficient operation with sleep modes as low as 0.12mA
How to Use
Implementation is straightforward with multiple connectivity options:
- Connect via SP/CE cable for no-solder setup
- Attach the included antenna to the SMA connector
- Insert the provided global SIM card
- Power up using a compatible power source (3.7V - 6.0V)
- Control through standard AT Commands or use provided MicroPython libraries
What's in the Box
- Clipper 4G LTE Breakout board
- SP/CE cable
- 108mm Antenna
Compatibility
The Clipper 4G LTE IoT Starter Kit integrates seamlessly with:
- Raspberry Pi Pico and RP2040-based boards
- RP2350 microcontrollers
- Raspberry Pi computers
- Any SP/CE compatible device
For projects requiring alternative cellular connectivity solutions, consider the Waveshare 4G HAT for Raspberry Pi, which offers additional features such as GPS positioning and SMS capabilities.
Additional Resources
- Custom MicroPython builds with LTE support for RP2350 and RP2040 boards
- Detailed documentation including pinout diagrams and schematics
- Example code and implementation guides
- SIMCom AT-Command Manual for advanced configuration
About Pimoroni
Pimoroni specialises in creating innovative electronic components and solutions for the maker community. Their products are designed with attention to detail and user-friendly implementation, making advanced technology accessible for both educational and professional applications. The Clipper 4G LTE IoT Starter Kit exemplifies their commitment to providing reliable, well-documented tools for electronic project development.
Exact shipping can be calculated on the view cart page (no login required).
Products that weigh more than 0.5 KG may cost more than what's shown (for example, test equipment, machines, >500mL liquids, etc).
We deliver Australia-wide with these options (depends on the final destination - you can get a quote on the view cart page):
- $3+ for Stamped Mail (typically 10+ business days, not tracked, only available on selected small items)
- $7+ for Standard Post (typically 6+ business days, tracked)
- $11+ for Express Post (typically 2+ business days, tracked)
- Pickup - Free! Only available to customers who live in the Newcastle region (must order online and only pickup after we email to notify you the order is ready). Orders placed after 2PM may not be ready until the following business day.
Non-metro addresses in WA, NT, SA & TAS can take 2+ days in addition to the above information.
Some batteries (such as LiPo) can't be shipped by Air. During checkout, Express Post and International Methods will not be an option if you have that type of battery in your shopping cart.
International Orders - the following rates are for New Zealand and will vary for other countries:
- $12+ for Pack and Track (3+ days, tracked)
- $16+ for Express International (2-5 days, tracked)
If you order lots of gear, the postage amount will increase based on the weight of your order.
Our physical address (here's a PDF which includes other key business details):
Unit 18, 132 Garden Grove Parade
Adamstown
NSW, 2289
Australia
Take a look at our customer service page if you have other questions such as "do we do purchase orders" (yes!) or "are prices GST inclusive" (yes they are!). We're here to help - get in touch with us to talk shop.
Have a product question? We're here to help!
Saleae Logic 16 ProSKU: LOGIC16PRO Brand: SaleaeThe Saleae Logic 16 Pro is a compact and powerful logic analyzer that can record ...- SIM7600G-H M.2 4G HAT for Raspberry Pi, LTE CAT4 High Speed, 4G/3G/2G, GNSS, Global BandSKU: WS-21707 Brand: WaveshareSIM7600G-H M.2 4G HAT For Raspberry Pi, LTE CAT4 High Speed, Global Coverage Mul ...
- Power Management HAT for Raspberry PiSKU: WS-23452 Brand: WavesharePower Management HAT for Raspberry Pi, with Embedded Arduino MCU and RTC...
- RS485 CAN HAT for Raspberry PiSKU: WS-14882 Brand: WaveshareRS485 CAN HAT For Raspberry Pi, Allows Stable Long-Distance Communication
- USB to TTL Serial UART RS232 Adaptor (PL2303TA)SKU: 018-USB-PL2303HX Brand: Core ElectronicsUSB to TTL converters are essential for prototyping - they provide a direct inte ...
- Interface Cable SMA to U.FLSKU: WRL-09145 Brand: SparkfunThis is a 4" connector cable that interfaces U.FL RF connectors to regular SMA c ...
- Hologram Hyper - eUICC Global IoT SIM CardSKU: CE05452 Brand: HologramA secure IoT SIM card for a global cell network built for M2M data with easy act ...
- Professional Solderless Breadboard BB400 - 400 tie points (Metal Backing Plate)SKU: CE07064BreadBoard-400 is a solderless (plug-in) breadboard with 400 connection tie-poin ...
Videos
View AllGuides
4G and GPS HAT For Raspberry Pi - Waveshare SIM7600X
LTE Cat-M1 vs NB-IoT - 4G Connectivity Comparison with IoT Devices
Mobile Networks - Where Can My IoT Device Connect?
The Maker Revolution
Projects
Spectral Animations with a DIY MSGEQ7 I2C Device
VisionSphere: Camera Motion Detection for Raspberry Pi
Arduino E-Paper Clock
Makers love reviews as much as you do, please follow this link to review the products you have purchased.
Product Comments