Search results for: 'qwiic stemma piicodev'
PiicoDev Cable 500mm
Brand: PiicoDev
This 500mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$1.35 AUD, inc GST
PiicoDev Cable 50mm
Brand: PiicoDev
This 50mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.80 AUD, inc GST
PiicoDev Cable 200mm
Brand: PiicoDev
This 200mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.98 AUD, inc GST
PiicoDev Cable 100mm
Brand: PiicoDev
This 100mm cable is for connecting PiicoDev modules together - it is a 4-wire harness with 1mm pitch SH connectors on each end.
$0.85 AUD, inc GST
PiicoDev Precision Temperature Sensor TMP117
Brand: PiicoDev
Accurate to ±0.1°C (across -20°C to +50°C) with no calibration required.
$9.60 AUD, inc GST
PiicoDev RFID Module (NFC 13.56MHz)
Brand: PiicoDev
Read (and write) RFID/NFC tags with this compact module.
$11.45 AUD, inc GST
PiicoDev Buzzer Module
Brand: PiicoDev
Play simple tones or even melodies - add an audible alert to your project.
$9.40 AUD, inc GST
I2C Breakout Shield
Brand: Unexpected Maker
I2C Breakout shield for the TinyPICO & TinyS2...
$11.74 AUD, inc GST
PiicoDev Prototyping Cable (Male) 200mm
Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$0.95 AUD, inc GST
PiicoDev 3x RGB LED Module
Brand: PiicoDev
Add dazzle to your project with three individually controllable RGB LEDs.
$6.50 AUD, inc GST
PiicoDev 3-Axis Accelerometer LIS3DH
Brand: PiicoDev
Measure tilt-angle, linear acceleration. Detect tapping and shaking.
$5.25 AUD, inc GST
PiicoDev Ambient Light Sensor VEML6030
Brand: PiicoDev
Measure the brightness of ambient light with a 16-bit sensor.
$9.35 AUD, inc GST
PiicoDev Adapter for Raspberry Pi
Brand: PiicoDev
The PiicoDev® Adapter for Raspberry Pi is a great way to connect sensors to your Raspberry Pi without soldering.
$4.05 AUD, inc GST
PiicoDev Splitter
Brand: PiicoDev
Split one PiicoDev Cable in three directions, or break out for soldered connections
$3.50 AUD, inc GST
PiicoDev Prototyping Cable (Female) 200mm
Brand: PiicoDev
This 200mm cable breaks out the four wires in a PiicoDev cable for manual wiring to breadboards or development boards. It's a 4-wire harness with an SH connector on one end and four Dupont-style connectors on the other.
$2.70 AUD, inc GST
PiicoDev Adapter for Micro:bit
Brand: PiicoDev
Connect your Micro:bit with the outside world using PiicoDev® Adapter for Micro:bit. With this adapter you can experiment with sensors from the PiicoDev range giving your Micro:bit new sensing abilities.
$13.20 AUD, inc GST
PiicoDev Servo Driver (4 Channel)
Brand: PiicoDev
Motion means exciting. Control up to 4 servos independently!
$14.65 AUD, inc GST
PiicoDev OLED Display Module (128x64) SSD1306
Brand: PiicoDev
Display text, draw shapes, animations, and even create plots.
$12.30 AUD, inc GST
PiicoDev Ultrasonic Rangefinder
Brand: PiicoDev
Use echolocation to measure distance
$9.55 AUD, inc GST
PiicoDev Button
Brand: PiicoDev
An accessible, tactile interface adds control to your project.
$8.05 AUD, inc GST
PiicoDev LiPo Expansion Board for Raspberry Pi Pico
Brand: PiicoDev
The PiicoDev® LiPo Expansion Board for Raspberry Pi Pico is a great way to start experimenting with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.
$5.40 AUD, inc GST
PiicoDev Buzzer Module v1.0
Brand: PiicoDev
Play simple tones or even melodies - add an audible alert to your project.
$7.50 AUD, inc GST
PiicoDev Expansion Board for Pico (Non-Recharging)
Brand: PiicoDev
Start experimenting with high-tech sensors and modules with Raspberry Pi Pico/RP2040. Use the on-board PiicoDev connector to quickly and easily connect with the PiicoDev family of sensor modules without soldering.
$5.90 AUD, inc GST
PiicoDev Atmospheric Sensor BME280
Brand: PiicoDev
Measure temperature, humidity, and barometric pressure. Use it to build your own weather station or perform experiments.
$23.50 AUD, inc GST
PiicoDev Laser Distance Sensor VL53L1X
Brand: PiicoDev
The PiicoDev® Distance Sensor is a long-distance laser-ranging sensor that uses Time-of-Flight (ToF) to accurately measure distances up to 4m.
$20.75 AUD, inc GST
PiicoDev Cable Expansion Kit
Brand: PiicoDev
Top up your PiicoDev Starter kit with a range of the most used cables!
$12.76 AUD, inc GST
PiicoDev Adapter for Breadboards
Brand: PiicoDev
The PiicoDev® Adapter for Breadboards allows you to break-out the 4-wires in a PiicoDev cable for prototyping on a breadboard.
$1.65 AUD, inc GST
PiicoDev Real Time Clock (RTC) RV-3028
Brand: PiicoDev
Accurate timekeeping, even during a power outage.
$16.30 AUD, inc GST
PiicoDev Potentiometer (Slide)
Brand: PiicoDev
Add intuitive analogue control to your project.
$10.25 AUD, inc GST
PiicoDev Magnetometer MMC5603
Brand: PiicoDev
Measures invisible magnetic fields - use as a compass or to detect nearby magnets.
$5.45 AUD, inc GST
PiicoDev Capacitive Touch Sensor
Brand: PiicoDev
Add user control to your project with three touch pad inputs.
$7.35 AUD, inc GST
PiicoDev Air Quality Sensor ENS160
Brand: PiicoDev
Measure indoor air-quality - sensitive to fumes, cooking smells, humans.
$32.85 AUD, inc GST
PiicoDev Pressure Sensor MS5637
Brand: PiicoDev
Measure barometric pressure or infer altitude-change from air pressure.
$10.90 AUD, inc GST
PiicoDev Colour Sensor VEML6040
Brand: PiicoDev
Experiment with light! Differentiate colour hues and classify objects based on their colour.
$12.70 AUD, inc GST
SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)
Brand: Adafruit
The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with...
$13.55 AUD, inc GST
Adafruit Wii Nunchuck Breakout Adapter - Qwiic / STEMMA QT
Brand: Adafruit
Dig out that old Wii controller and use it as a sleek controller for your next robot if you like. The Adafruit Adafruit Wii Nunchuck Breakout Adapter fits snugly into the Wii connector, and performs the level shifting and power regulation needed to use the controller with any microcontroller or microcomputer.
$5.95 AUD, inc GST
Adafruit Qwiic / Stemma QT Breakout Board
Brand: Adafruit
We got a request from a customer for a board that makes connecting between a breadboard and Stemma QT or Qwiic components easy, and here's what we...
$3.80 AUD, inc GST
Adafruit Qwiic / Stemma QT 5 Port Hub
Brand: Adafruit
Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one port, and devices have...
$4.95 AUD, inc GST
Adafruit I2C Stemma QT Rotary Encoder Breakout with Encoder - STEMMA QT / Qwiic
Brand: Adafruit
Rotary encoders are soooo much fun! Twist em this way, then twist them that way. Unlike potentiometers, they go all the way around and often have little...
$14.65 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.