Search results for: &#039;audio output&#039;

A cute little speaker for the ReSpeaker Voice Assistant Maker Kit.

$7.05 AUD, inc GST

Raspberry Pi DAC Pro

Brand: Raspberry Pi

The Raspberry Pi DAC Pro is Raspberry Pi's highest-fidelity audio output HAT. It uses the Texas Instruments PCM5242 DAC to deliver outstanding signal-to-noise ratio performance from a Raspberry Pi 1 Model B+, 2, 3, 4 and 5, and supports balanced/differential output in parallel to phono/RCA line level output. It also includes a dedicated headphone amplifier.

$39.50 AUD, inc GST

Adafruit PCM5102 I2S DAC with Line Level Output - 112dB SNR

We stock a lot of chips and development boards that are able to do high quality digital I2S out, which makes for great quality audio playback. That's...

$8.95 AUD, inc GST

Upgrade your sound system with our Thin Speaker! Measuring just 28mm, this 4 Ohm, 2.5W speaker is sleek and powerful. Perfect for any DIY audio project.

Thin Speaker - 4 Ohm, 2.5W, 28mm

Brand: SparkFun

$3.75 AUD, inc GST

This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high...

Teensy Audio Adapter Board (Rev D)

Brand: Teensy

$16.40 AUD, inc GST

Adafruit TLV320DAC3100 - I2S DAC with Headphone and Speaker Out

We stock a lot of chips and development boards that are able to do high quality digital I2S out, which makes for great quality audio playback. That's...

$13.10 AUD, inc GST

USB Audio Adapter - Works with Raspberry Pi

The Raspberry Pi has an on-board audio jack, which is super handy for all kinds of sound effects and speech, just plug and go! However, for when you want better...

$10.50 AUD, inc GST

Mono Enclosed Speaker with Plain Wires - 3W 4 Ohm

Listen up! This single 2.8" x 1.2" speaker is the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. Adafruit particularly like...

$9.10 AUD, inc GST

ReSpeaker Lite - USB 2-Mic Array (No ESP32)

Brand: Seeed Studio

For applications where you might want to use the USB output into a Pi!

$42.60 AUD, inc GST

Adafruit Mono 2.5W Class D Audio Amplifier - PAM8302

This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class...

$7.30 AUD, inc GST

Raspberry Pi DAC+

Brand: Raspberry Pi

The Raspberry Pi DAC+ is an audio output HAT for all generations of Raspberry Pi from Raspberry Pi 1 Model B+ onwards, and supports 24‑bit 192kHz high-resolution digital audio. It uses the Texas Instruments PCM5122 DAC to deliver stereo analogue audio to a pair of phono connectors, and also supports a dedicated headphone amplifier.

$31.40 AUD, inc GST

Adjustable Dual Channel Audio Amplifier

Brand: Core Electronics

Pump up the tunes!! Use this feature-packed audio amplifier to bring a whole new sense to your projects.

$1.95 AUD, inc GST

This is a Mini Audio Stereo Amplifier from DFRobot. It has left and right channels that can realize stereo surround sound. The module has a mini body and 2.54mm...

3W Mini Audio Stereo Amplifier (W2.54)

Brand: DFRobot

$9.34 AUD, inc GST

Stereo Enclosed Speaker Set - 3W 4 Ohm

Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. Adafruit particularly...

$18.25 AUD, inc GST

Stereo 20W Class D Audio Amplifier - MAX9744

Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of 4-8 ohm impedance speakers...

$39.20 AUD, inc GST

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and...

Thin Speaker - 0.5W

Brand: SparkFun

$2.65 AUD, inc GST

Adafruit I2S Stereo Decoder - UDA1334A Breakout

This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It's affordable but sounds great! The NXP UDA1334A is...

$14.05 AUD, inc GST

This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiometer.

Gravity: Digital Speaker Module

Brand: DFRobot

$9.51 AUD, inc GST

The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S (not be confused with I2C) audio to an analog signal...

SparkFun I2S Audio Breakout - MAX98357A

Brand: SparkFun

$12.30 AUD, inc GST

An easy way to add audio effects or music to your next project. The compact board measures just 47mmm long and features a 23mm diameter speaker, 2W amplifier, and a trimpot for volume control. Powered from 5V.

Audio Amplifier Module with Speaker for Arduino

$11.95 AUD, inc GST

Adafruit STEMMA Speaker - Plug and Play Audio Amplifier

Hey, have you heard the good news? With Adafruit STEMMA boards you can easily and safely plug sensors and devices together, like this Adafruit STEMMA Speaker - Plug...

$12.80 AUD, inc GST

Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB

This is a simple, low-cost audio effects trigger that is easy to use and does not require any programming!

$56.95 AUD, inc GST

Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so they...

$24.60 AUD, inc GST

The Digi2 Pro is a high-quality S/PDIF output for the Raspberry Pi.

HiFiBerry Digi2 Pro

Brand: HiFiBerry

$115.95 AUD, inc GST

Connect a pair of small speakers up to a Raspberry Pi (or other computer) easily with this RP2040-powered USB-C sound card/3W stereo amplifier....

Picade Max USB Audio

Brand: Pimoroni

$34.20 AUD, inc GST

Makerverse Audio Kit

Brand: Makerverse

Build + Code an electronic keyboard and WAV-file player

$30.75 AUD, inc GST

Adafruit Audio FX Sound Board - WAV/OGG Trigger with 16MB Flash

Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want...

$45.20 AUD, inc GST

Make some noise with this high quality stereo I2S audio add-on board for your Raspberry Pi Pico, with amplified headphone AND unamplified line level outputs!

Pimoroni Pico Audio Pack (Line-Out and Headphone Amp)

Brand: Pimoroni

$32.55 AUD, inc GST

Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger - 2MB

Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers. Adafruit's Audio FX Sound Board is the fastest way to add audio effects to a project! We think this is the best sound board for props and costumes!

$43.10 AUD, inc GST