Search results for: '5v battery'

45 results

6 x AA battery holder with 5.5mm/2.1mm plug

Brand: Adafruit
Make a portable power brick with plenty of juice! Use Alkaline AA's for a 9V 3000-4000mAh power supply, or rechargeable NiMH for 2000mAh 7.5V supply. Either one...
$7.75 AUD, inc GST

Battery Bank 5000mAH

Brand: Core Electronics

Keep a spare bit of charge in your pocket at all times or power up portable projects!

$26.95 AUD, inc GST

littleBits 9V Battery + Cable

Brand: LittleBits
This package contains a 9v alkaline battery and a cable to connect it to the power Bit. Connect it up and then flip the switch to power all of your creations!
$11.99 AUD, inc GST $12.95
Similar matches

Polymer Lithium Ion Battery (LiPo) 3.7V 400mAh

Brand: Core Electronics
Polymer Lithium Ion batteries offer superior energy density with this 400mAh battery being only 6mm in height!
$5.55 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 2000mAh

Brand: Core Electronics
Welcome to the awesomeness that is LiPo batteries. Polymer Lithium Ion batteries offer superior energy density with this 2000mAh battery being on 5.8mm in height!
$14.45 AUD, inc GST

Raspberry Pi 5 18650 Battery UPS HAT (5.1V 5A)

Brand: DFRobot
The 5.1V 5A Raspberry Pi 5 power supply UPS HAT features a 4-cell 18650 battery holder for extended operation. Offers seamless power switching, automatic...
$99.40 AUD, inc GST

Pololu 5V, 5A Step-Down Voltage Regulator D24V50F5

Brand: Pololu
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.8″, but it allows a typical continuous output current of up to 5 A. Typical efficiencies of 85% to 95% make this regulator well suited for high-power applications like powering motors or servos. High efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin enables a low-power state with a current draw of a few hundred microamps.
$49.95 AUD, inc GST

Sunflower: Solar Power Manager 5V

Brand: DFRobot
DFRobot is launching a brand new series - Sunflower, focusing on high-efficiency, small power solar energy management for IoT projects and renewable energy applications...
$13.35 AUD, inc GST

Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5

Brand: Pololu
The S7V7F5 switching step-up/step-down regulator efficiently produces 5 V from input voltages between 2.7 V and 11.8 V. Its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 5 V. The very compact (0.35″ × 0.475″) module has a typical efficiency of over 90% and can supply up to 1 A when stepping down and about 500 mA when stepping up.
$14.25 AUD, inc GST

9V battery holder with switch & 5.5mm/2.1mm plug

Brand: Adafruit
This is a 9V battery pack with on/off switch and a pre-attached 5.5mm/2.1mm center-positive barrel plug. Use this to battery-power your Arduino (or other electronic...
$8.75 AUD, inc GST

Voltage Regulator 5V (7805)

Brand: Core Electronics

An absolute staple! The ubiquitous L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage.

$0.92 AUD, inc GST

9V Battery Clip

Brand: Core Electronics
Standard 9V Battery Clip with leads.
$0.46 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 3.7V 6000mAh

Brand: Core Electronics
This Lithium Polymer Ion based battery is a slim, lightweight battery that is perfect for a portable project! LIPO chemistry is the highest energy density chemistry around and due to that, you get nominal 3.7V at 6000mAh!
$40.45 AUD, inc GST

3-pin LiPo Battery 1000mAh

Brand: Core Electronics

1000mAh Lithium-Ion battery with an inboard NTC.

$8.50 AUD, inc GST

Polymer Lithium Ion Battery (LiPo) 18650 Cell (3.7V 2600mAh, Solder Tab)

Brand: Core Electronics

This is the same 18650 Lithium Ion Cell that you know and love, but now includes pre-attached solder tabs! These round high capacity cells have been mainly used in flashlight type applications but with its capability to be used as a drop-in rechargable cell at 3.7V with a capacity of 2600mAh. This battery has been made even better with the attached solder tabs. You now have a much wider range of applications to drop this battery into while still remaining simple to install!

$12.15 AUD, inc GST

5V Step-Up Voltage Regulator U3V16F5

Brand: Pololu
This compact (0.32"×0.515") switching step-up (or boost) voltage regulator efficiently generates 5 V from input voltages as low as 1.3 V and handles...
$11.70 AUD, inc GST

Li-polymer Battery HAT, 5V Output, Quick Charge

Brand: Waveshare

Delivers 5V from a 3.7V Li-polymer pack to a Raspberry Pi with bi-directional quick charge, and includes protection and capacity LEDs for safe DIY use.

$31.95 AUD, inc GST

5V Step-Up/Step-Down Voltage Regulator S8V9F5

Brand: Pololu
This synchronous switching step-up/step-down regulator efficiently produces 5 V from input voltages between 1.4 V and 16 V. (Note: minimum startup voltage...
$16.65 AUD, inc GST

DC-DC Boost Module (5V)

Brand: DFRobot
This is a small DC - DC boost module that integrates a PFM DC-DC boost control chip. It can convert a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino microcontroller and other small electronic devices that use a 5v input. The maximum output current is up to 500 ~ 600 mA. There are two power input ports, PH2.0 and KF235-3.81-2P which are compatible with DFRobot's 3.7 V lithium battery.
$6.60 AUD, inc GST

5V, 500mA Step-Down Voltage Regulator D45V5F5

Brand: Pololu
Note 1: Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information...
$7.45 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.