Search results for: '12 volt motor driver'

46 results

Makerverse Motor Driver 2 Channel

Brand: Makerverse
Drive 2x Brushed DC motors or a bipolar stepper with optional current limiting
$6.60 AUD, inc GST

2x7A DC Motor Driver

Brand: DFRobot
This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.
$33.23 AUD, inc GST

2x1.2A DC Motor Driver (TB6612FNG)

Brand: DFRobot
This DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins...
$7.43 AUD, inc GST

3A 4V-16V 2 Channel DC Motor Driver

Brand: Cytron
Looking for a motor driver for your robot? Want to drive a stepper motor? Worry not! This smart motor driver from Cytron is able to control two brushed DC...
$19.35 AUD, inc GST

SparkFun Motor Driver - Dual TB6612FNG (with Headers)

Brand: SparkFun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$26.40 AUD, inc GST

15A Single DC Motor Driver

Brand: DFRobot
This is an ultra small size DC motor driver for room limited projects, while the impressive IC - LM2575 could provide a powerful way to drive 36V@15A motors. Also its UVLO (Under Voltage Latch-Out) feature provides a safe guard for your system. Besides all, it is very considerate to own an 5V output for Arduino or any other devices, and its interface is ESD (electro-static discharge) protection.
$31.80 AUD, inc GST

L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh

Brand: Adafruit
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's...
$2.95 AUD, inc GST

DRV8876 Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for TI’s DRV8876 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 1.3 A (3.5 A...
$13.50 AUD, inc GST

Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D

Brand: Adafruit
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers...
$16.85 AUD, inc GST

1x20A Motor Controller (9-30V Input)

Brand: goBILDA
This motor speed controller is a compact, easy way to control the speed and direction of a brushed DC motor! Just plug in.....
$79.45 AUD, inc GST

L298 Dual H-Bridge Motor Driver (Seeed Studio)

Brand: Seeed Studio
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a...
$45.85 AUD, inc GST

10A 6V-24V DC Raspberry Pi Motor Driver HAT

Brand: Cytron
Looking for a high-current motor driver for your Raspberry Pi? How does dual 10A channels sound?! Cytron's latest motor driver is designed for the...
$63.60 AUD, inc GST

EasyDriver - Stepper Motor Driver

Brand: SparkFun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST

SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)

Brand: SparkFun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less...
$38.70 AUD, inc GST

DC Motor Driver HAT(V1.0)

Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.70 AUD, inc GST

H-Bridge Motor Driver 1A

Brand: SparkFun
Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D.
$4.20 AUD, inc GST

Full-Bridge Motor Driver Dual - L298N

Brand: SparkFun
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.
$10.65 AUD, inc GST

SparkFun Motor Driver - Dual TB6612FNG (1A)

Brand: SparkFun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$27.65 AUD, inc GST

PPM 2x3A DC Motor Driver

Brand: DFRobot
This motor driver module is a special PPM signal motor controller for Aero modelling remote control. It is designed by DFRobot and it can be controlled by RC transmitter...
$24.87 AUD, inc GST

SparkFun Qwiic Motor Driver

Brand: SparkFun
The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them, adding Qwiic ports for plug and...
$39.25 AUD, inc GST

SyRen Single 25A DC Motor Driver

Brand: DFRobot
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs...
$151.90 AUD, inc GST

Dual MC33926 Motor Driver Carrier

Brand: Pololu
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$71.25 AUD, inc GST

Motoron M1T256 Single I²C Motor Controller

Brand: Pololu
The Motoron M1T256 Single I²C Motor Controller offers a compact solution for controlling one DC motor using an I²C interface. Multiple Motoron controllers...
$26.80 AUD, inc GST

SparkFun Mini Stepper Motor Driver - TC78H670FTG

Brand: SparkFun
The SparkFun Mini Stepper Motor Driver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba!...
$21.60 AUD, inc GST

BD65496MUV Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A...
$25.10 AUD, inc GST

2x40A Motor Controller

Brand: goBILDA

The 2x40A Motor Controller is the perfect companion to the goBILDA 20V Smart Dock

$229.95 AUD, inc GST

Grove - I2C Motor Driver (Seeed Studio)

Brand: Seeed Studio
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication...
$38.80 AUD, inc GST

DRV8256E Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for TI’s DRV8256E motor driver offers a wide operating voltage range of 4.5 V to 48 V and can deliver a continuous 1.9 A...
$23.70 AUD, inc GST

Dual Channel Motor Driver

Brand: Core Electronics

Control motors and make your projects move with is great value motor controller!

$1.80 AUD, inc GST

Grove - I2C Motor Driver (TB6612FNG)

Brand: Seeed Studio

Minimise wiring and save valuable microcontroller pins with the Grove I2C Motor Driver. Built around the TB6612FNG IC, it drives two DC motors or one stepper motor at up to 1.2A continuous current per channel.

$22.50 AUD, inc GST

SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)

Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful WiFi & BLE capable motor driver that can control any 3-phase BLDC motor including the one on-board...
$179.95 AUD, inc GST
Similar matches

Pololu G2 High-Power Motor Driver 18v17

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" × 0.8" board supports a wide...
$74.75 AUD, inc GST

SparkFun Brushless Motor Driver - 3-Phase (TMC6300)

Brand: SparkFun
The TMC6300 from Trinamic is a powerful, yet easy to use three-phase brushless DC (BLDC) motor driver...
$29.75 AUD, inc GST

Pololu G2 High-Power Motor Driver 24v13

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$74.80 AUD, inc GST

Pololu G2 High-Power Motor Driver 24v21

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$94.60 AUD, inc GST

High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)

Brand: Pololu
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five...
$229.95 AUD, inc GST

Pololu High-Power Motor Driver 36v20 CS

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 20 A without a heat sink. This version outputs an analog voltage proportional to the motor current, and an extra control input allows for coasting in addition to the driving and braking offered by the other Pololu high-power motor drivers.
$209.95 AUD, inc GST

Pololu H2 High-Power Motor Driver 36v11 CS

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" × 0.8" board supports a wide...
$93.20 AUD, inc GST

Motor Driver and Power Distribution Board for Romi Chassis

Brand: Pololu
Use this motor driver and power distribution board to get your Romi chassis running quickly. It offers all of the same features as the smaller Power...
$58.40 AUD, inc GST

Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)

Brand: DFRobot
This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces.
$7.42 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.