Search results for: 'tb6612fng motor driver'
TB6612FNG Dual Motor Driver Carrier
Brand: Pololu
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.
$8.25 AUD, inc GST
2x1.2A DC Motor Driver (TB6612FNG)
Brand: DFRobot
This DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins...
$7.70 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$26.40 AUD, inc GST
Grove - I2C Motor Driver (TB6612FNG)
Brand: Seeed Studio
Minimise wiring and save valuable microcontroller pins with the Grove I2C Motor Driver. Built around the TB6612FNG IC, it drives two DC motors or one stepper motor at up to 1.2A continuous current per channel.
$22.50 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (1A)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$27.65 AUD, inc GST
Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board
Brand: Adafruit
Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel using the TB6612. These are perhaps better known as "the...
$13.50 AUD, inc GST
Quad DC Motor Driver Shield for Arduino
Brand: DFRobot
The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG motor driver chips, compared with the traditional L298N chip, efficiency is improved and the component size also greatly reduced. The chip doesn't heat in to the rated range, and a single path maximum output 1.2A continuous current. The module includes a built-in low voltage detection circuit and thermal shutdown protection circuit, which is safe and reliable. This module is suitable for all kinds of DIY production.
$23.90 AUD, inc GST
DC Motor Driver HAT(V1.0)
Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.95 AUD, inc GST
Gravity: IO Expansion & Motor Driver Shield
Brand: DFRobot
Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped...
$28.30 AUD, inc GST
Similar matches
TB6600 Stepper Motor Driver
Brand: DFRobot
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
$33.50 AUD, inc GST
3A 4V-16V 2 Channel DC Motor Driver
Brand: The Pi Hut
Looking for a motor driver for your robot? Want to drive a stepper motor? Worry not! This smart motor driver from Cytron is able to control two brushed DC...
$19.35 AUD, inc GST
DRV8874 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 2.1 A (6 A...
$20.05 AUD, inc GST
Pico Sensor Kit
Brand: Waveshare
Raspberry Pi Pico Entry-Level Sensor Kit, Including Pico Expansion Board and 15 common modules, All-in-one design...
$73.60 AUD, inc GST
Pololu G2 High-Power Motor Driver 24v21
Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$94.60 AUD, inc GST
MP6550 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A...
$9.85 AUD, inc GST
DRV8838 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$8.20 AUD, inc GST
DRV8876 Single Brushed DC Motor Driver Carrier
This compact breakout board for TI’s DRV8876 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 1.3 A (3.5 A...
$13.50 AUD, inc GST
TB9051FTG Single Brushed DC Motor Driver Carrier
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB9051FTG brushed DC motor driver. It has a wide operating voltage range of 4.5 V to 28 V and can...
$21.75 AUD, inc GST
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
Brand: Adafruit
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers...
$16.85 AUD, inc GST
Dual/Single Motor Driver Carrier TB67H420FTG
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. It has a wide operating voltage range of 10 V to 47 V and can deliver a continuous 1.7 A to each motor channel, or 3.4 A in single-channel mode. A configurable current chopping threshold allows the TB67H420 to actively limit the motor current, and it features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).
$21.40 AUD, inc GST
Pololu G2 High-Power Motor Driver 24v13
Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$74.80 AUD, inc GST
Breakout Board for L298N Full-Bridge Motor Driver
Brand: Sparkfun
This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package.
$7.95 AUD, inc GST
L298 Dual H-Bridge Motor Driver (Seeed Studio)
Brand: Seeed Studio
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a...
$45.85 AUD, inc GST
Dual TB9051FTG Motor Driver Shield for Arduino
Brand: Pololu
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual TB9051FTG motor drivers operate from...
$53.50 AUD, inc GST
Motor Driver and Power Distribution Board for Romi Chassis
Brand: Pololu
Use this motor driver and power distribution board to get your Romi chassis running quickly. It offers all of the same features as the smaller Power...
$58.40 AUD, inc GST
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
Brand: Pololu
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five...
$229.95 AUD, inc GST
Baby Orangutan B-328 Robot Controller
Brand: Pololu
The Baby Orangutan B-328 is a very compact but complete robot controller, packing a high-performance ATmega328P AVR microcontroller (with 32 KB of program memory and 2 KB of RAM) and two motor drive channels in the same 24-pin form factor as competing units that include just a microcontroller. You can connect your battery, sensors, and motors directly to this small module to make a miniature robot, or you can use the Baby Orangutan as an auxiliary controller in larger robots.
$41.75 AUD, inc GST
TB67H453FNG Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for Toshiba’s TB67H453FNG motor driver offers a wide operating voltage range of 4.5 V to 44 V and can deliver a continuous...
$8.25 AUD, inc GST
Dual TB9051FTG Motor Driver for Raspberry Pi (Partial Kit)
Brand: Pololu
This add-on board enables a Raspberry Pi (Model B+ or newer) to drive a pair of brushed DC motors. Its dual TB9051FTG motor drivers operate from 4.5 V to...
$58.45 AUD, inc GST
Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)
Brand: DFRobot
This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces.
$7.60 AUD, inc GST
Dual MC33926 Motor Driver Carrier
Brand: Pololu
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$71.25 AUD, inc GST
SyRen Single 25A DC Motor Driver
Brand: DFRobot
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs...
$154.95 AUD, inc GST
TB67H453FTG (QFN) Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for Toshiba’s TB67H453FTG motor driver offers a wide operating voltage range of 4.5 V to 44 V and can deliver a continuous...
$7.45 AUD, inc GST
Pololu G2 High-Power Motor Driver 18v17
Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" × 0.8" board supports a wide...
$74.75 AUD, inc GST
Motoron M1T256 Single I²C Motor Controller
Brand: Pololu
The Motoron M1T256 Single I²C Motor Controller offers a compact solution for controlling one DC motor using an I²C interface. Multiple Motoron controllers...
$26.80 AUD, inc GST
2x40A Motor Controller
Brand: goBilda
The 2x40A Motor Controller is the perfect companion to the goBILDA 20V Smart Dock
$229.95 AUD, inc GST
2x3A DC Motor Driver Carrier Board for UNIHIKER
Brand: DFRobot
The UNIHIKER Carrier Board featuring a dual DC motor drive, RGB lights, infrared transmission and reception, and multiple power supply options (USB, DC...
$24.50 AUD, inc GST
BD65496MUV Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A...
$25.10 AUD, inc GST
MC33926 Motor Driver Carrier
Brand: Pololu
This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$38.05 AUD, inc GST
TB67S128FTG Stepper Motor Driver Carrier
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and...
$28.45 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.