Search results for: 'relay'
Learn
5V Single Channel Relay Module 10A
Brand: Core Electronics
A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.
$3.95 AUD, inc GST
5V 2 Channel Relay Module 10A
Brand: Core Electronics
A versatile relay board with opt-isolated inputs. Each channel can drive up to 10A @28VDC
$5.70 AUD, inc GST
5V 4 Channel Relay Module 10A
Brand: Core Electronics
A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC
$6.40 AUD, inc GST
Gravity: Digital Relay Module (Arduino and Raspberry Pi Compatible)
Brand: DFRobot
Introducing the Gravity Digital Relay Module – the latest addition to DFRobot’s Gravity series! This module is a little different to the other relays in our store...
$6.90 AUD, inc GST
8-ch Ethernet Relay Module (B)
Brand: Waveshare
8-ch Ethernet Relay Module (B) With Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits,...
$76.35 AUD, inc GST
Pololu Isolated Solid State Relay/Switch, SPST, 30V, 11A
Brand: Pololu
This solid state relay/switch board provides a way to make and break an electrical connection based on a 2.7 V to 40 V input signal. Its electrically...
$7.90 AUD, inc GST
Industrial 6-Channel ESP32-S3 WiFi Relay Module
Brand: Waveshare
Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...
$52.30 AUD, inc GST
Relay Module V2 (Arduino Compatible)
Brand: DFRobot
The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.
$4.40 AUD, inc GST
8-ch Ethernet Relay Module
Brand: Waveshare
8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits, Industrial Grade...
$68.05 AUD, inc GST
3 Channel Relay Module Shield Smart Home for Raspberry Pi
Brand: Waveshare
Perfect for simple home-automation projects, this module allows your Raspberry Pi to control three independent relays, allowing you to easily control high-current loads while keeping your Pi safely isolated. All the necessary driver circuitry is on-board, and control is as simple as driving a GPIO pin high or low
$26.10 AUD, inc GST
Solid State Relay - 40A (3-32V DC Input)
Brand: Sparkfun
A solid-state relay (SSR) allows you to control high-current AC loads from lower-voltage DC control circuitry.
$29.40 AUD, inc GST
Pololu Isolated Solid State Relay/Switch, SPST, 60V, 7A
Brand: Pololu
This solid state relay/switch board provides a way to make and break an electrical connection based on a 2.7 V to 40 V input signal. Its electrically...
$6.55 AUD, inc GST
Industrial 8-Channel ESP32-S3 WiFi Relay Module (Isolated RS485)
Brand: Waveshare
Safely control circuits and isolate logic inputs. Driven by an ESP32-S3, this DIN-rail mountable hub features robust optocoupler isolation and comprehensive connectivity, including RS485.
$61.34 AUD, inc GST
Raspberry Pi 8-Channel Relay Board
Brand: Waveshare
Add 8 easy to use relays to your Raspberry Pi
$38.35 AUD, inc GST
Industrial 8-Channel ESP32-S3 WiFi Relay Module (With POE)
Brand: Waveshare
Securely control inductive loads and execute complex automated logic directly from the edge. The Waveshare ESP32-S3-ETH-8DI-8RO-C integrates eight isolated 10A relays, an onboard CAN interface, and robust dual-core processing into a DIN-rail enclosure.
$84.25 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.
$14.70 AUD, inc GST
Industrial Modbus RTU 8-ch Relay Module (D)
Brand: Waveshare
Industrial Modbus RTU 8-ch Relay Module (D) With Digital Input and RS485 Interface, Multi Isolation Protection Circuits, 7~36V Power Supply...
$61.80 AUD, inc GST
1 Channel Solid State Relay Module (DC Control, AC Load)
Brand: Core Electronics
This breakout module gives you access to a single channel solid state relay that can be switched with 3-5VDC
$4.70 AUD, inc GST
4 Channel Solid State Relay Module (DC Control, AC Load)
Brand: Core Electronics
This breakout module gives you access to a 4 channel solid state relay that can be switched with 3-5VDC
$15.35 AUD, inc GST
Monk Makes Relay for micro:bit
Brand: Monk Makes
The Monk Makes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off.
$14.05 AUD, inc GST
Gravity: Magnetic Latching Relay for ESP32 / Arduino
Brand: DFRobot
This DFRobot magnetic latching relay is a new type of relay. It remains in the last position it was when last powered and features noiseless and low power...
$11.85 AUD, inc GST
Industrial Modbus RTU 8-ch Relay Module with RS485 Interface
Brand: Waveshare
Industrial Modbus RTU 8-ch Relay Module with RS485 Interface, Multi Isolation Protection Circuits, 5V Power Supply...
$53.40 AUD, inc GST
Grove - Relay (Seeed Studio)
Brand: Seeed Studio
The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards...
$5.90 AUD, inc GST
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Assembled)
Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 5 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$14.40 AUD, inc GST
Relay SPDT Sealed
Brand: Sparkfun
These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage, and/or high current devices.
$5.50 AUD, inc GST
Gravity: Easy Relay Module
Brand: DFRobot
The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting...
$14.25 AUD, inc GST
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)
Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 5 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC5 and are rated for up to 10 A under most conditions.
$27.40 AUD, inc GST
Modbus RTU 32-Ch Relay Module
Brand: Waveshare
Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case
$119.95 AUD, inc GST
Pololu RC Switch with Relay (Assembled)
Brand: Pololu
This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. This assembled version ships with the 5V relay, terminal block, and straight male header pins soldered in, so it can be integrated into hobby RC systems without the need for additional soldering. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10 A under most conditions.
$30.15 AUD, inc GST
Industrial 4-Channel Relay Module
Brand: DFRobot
The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600...
$53.60 AUD, inc GST
Zooz Z-Wave Universal Relay AU
Z-Wave relay with two NO/NC outputs and dual dry-contact 12-24V inputs to control DC up/down motors, sprinklers and gates.
$77.45 AUD, inc GST
2 Channel Solid State Relay Module (DC Control, AC Load)
Brand: Core Electronics
This breakout module gives you access to a 2 channel solid state relay that can be switched with 3-5VDC
$5.40 AUD, inc GST
8 Channel Solid State Relay Module (DC Control, AC Loads)
Brand: Core Electronics
This breakout module gives you access to a 8 channel solid state relay that can be switched with 3-5VDC
$26.75 AUD, inc GST
WisBlock Relay Module RAK13007
Brand: RAKwireless
Single-channel WisBlock relay switches up to 250 VAC/10 A for control of motors, lights and conveyors in IoT projects.
$12.65 AUD, inc GST
Industrial 8-Channel Relay Module for Raspberry Pi Pico
Brand: Waveshare
Industrial 8-Channel Relay Module For Raspberry Pi Pico, Power Supply Isolation, Photocoupler Isolation...
$33.35 AUD, inc GST
Power + Relay HAT for Raspberry Pi Zero
Brand: The Pi Hut
The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...
$42.95 AUD, inc GST
Pololu Basic 2-Channel SPDT Relay Carrier with 12VDC Relays (Assembled)
Brand: Pololu
The Pololu basic 2-channel relay carrier modules allow simple, independent control of two single-pole, double-throw (SPDT) switches from low-voltage, low-current control signals. This item includes the basic carrier PCB with two soldered-in 12 V relays, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relays are Omron G5LE-14-DC12 and are rated for up to 10 A under most conditions.
$23.90 AUD, inc GST
Arduino 4 relays shield
Brand: Arduino
The Arduino 4 Relays Shield allows your Arduino driving high power loads.
$52.60 AUD, inc GST
16A Relay Module (Arduino Compatible)
Brand: DFRobot
A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit.It is actually "automatic switch" ,using a small electric current to control a larger current.
$16.65 AUD, inc GST
SparkFun Qwiic Quad Relay
Brand: Sparkfun
The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another...
$61.75 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.