Search results for: 'ds18b20 temperature sensor'
Temperature Sensor - Waterproof (DS18B20)
Brand: Sparkfun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
$21.20 AUD, inc GST
DS18B20 Digital temperature sensor + extras
Brand: Adafruit
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog...
$7.45 AUD, inc GST
Waterproof DS18B20 Digital temperature sensor + extras
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor...
$20.60 AUD, inc GST
Waterproof SMD DS18B20 Digital Temperature Sensor
Brand: DFRobot
This waterproof SMD DS18B20 temperature sensor provides 9-bits to 12-bit (configurable) temperature measurement and communicates over a 1-Wire bus that by...
$11.90 AUD, inc GST
Temperature Sensor - High Temperature, Waterproof (DS18B20)
Brand: Sparkfun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface.
$23.40 AUD, inc GST
High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$44.80 AUD, inc GST
18B20 Temerature Sensor (Arduino Compatible)
Brand: DFRobot
DS18B20 is a digital temperature sensor which is from DALLAS U.S. It can be used to quantify the environmental temperature testing.
$9.45 AUD, inc GST
Gravity: Analog Electrical Conductivity Sensor /Meter V2 (K=1)
Brand: DFRobot
DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
$124.95 AUD, inc GST
One Wire Temperature Sensor (Seeed Studio)
Brand: Seeed Studio
This 2m long One Wire Temperature Sensor has a waterproof probe and long wire shape, suitable for immersive temperature detection. The chip inside this...
$18.85 AUD, inc GST
One-Wire Ambient Temperature Sensor - MAX31820
Brand: Sparkfun
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over...
$9.55 AUD, inc GST
High Temp Waterproof DS18B20 Digital temperature sensor + extras
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$28.70 AUD, inc GST
Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout - STEMMA QT / Qwiic JST SH 1mm
Brand: Adafruit
By customer request, this is a DS2484 Stemma QT board that uses a I2C-to-1W controller chip, with ESD protection and support for split supplies. You can...
$14.10 AUD, inc GST
Adafruit Chainable DS18B20 Extender Breakout - STEMMA JST PH 2mm
Brand: Adafruit
One of the perks of working at adafruit is you get to request hardware - and you'll probably get fast turnaround! One of our adafruit.io developers...
$8.10 AUD, inc GST
Similar matches
DHT22 Module (Temperature and Humidity)
Brand: Core Electronics
Accurately measure temperature and humidity with the DHT22 module. Ideal for DIY weather stations or automatic plant watering systems. Only one pin required for temperature and humidity readings.
$9.40 AUD, inc GST
PiicoDev Precision Temperature Sensor TMP117
Brand: PiicoDev
Accurate to ±0.1°C (across -20°C to +50°C) with no calibration required.
$9.60 AUD, inc GST
DHT11 Temperature and Relative Humidity Sensor Module
Brand: Core Electronics
The module can detect surrounding environment of the humidity and temperature.
$1.40 AUD, inc GST
SHT31 Weather-proof Temperature & Humidity Sensor
Brand: DFRobot
This is an SHT31 Temperature & Humidity sensor housed in a weather-proof enclosure. The sensor is designed to be waterproof so you can use it safely in outdoor projects...
$33.50 AUD, inc GST
Gravity: I2C DS1307 RTC Module
Brand: DFRobot
The DS1307 Real Time Clock developed by one of our designers: Waiman. The module comes fully assembled and pre-programmed with the current time (ok, so it's our current time - MST).
$6.85 AUD, inc GST
SHT31 Digital Temperature & Humidity Sensor Breakout
Brand: DFRobot
This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...
$14.90 AUD, inc GST
I2C Temperature & Humidity Sensor (Stainless Steel Shell)
Brand: DFRobot
The I2C Temperature & Humidity Sensor (Stainless Steel Shell) adopts 304 stainless steel for its housing to ensure good impact resistance, heat...
$12.30 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.