Search results for: 'ds18b20 waterproof temperature sensor'
Temperature Sensor - Waterproof (DS18B20)
Brand: Sparkfun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.
$21.20 AUD, inc GST
Waterproof SMD DS18B20 Digital Temperature Sensor
Brand: DFRobot
This waterproof SMD DS18B20 temperature sensor provides 9-bits to 12-bit (configurable) temperature measurement and communicates over a 1-Wire bus that by...
$11.90 AUD, inc GST
Waterproof DS18B20 Digital temperature sensor + extras
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor...
$20.60 AUD, inc GST
Temperature Sensor - High Temperature, Waterproof (DS18B20)
Brand: Sparkfun
This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface.
$23.40 AUD, inc GST
High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$44.80 AUD, inc GST
High Temp Waterproof DS18B20 Digital temperature sensor + extras
Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet...
$28.70 AUD, inc GST
I2C Temperature & Humidity Sensor (Stainless Steel Shell)
Brand: DFRobot
The I2C Temperature & Humidity Sensor (Stainless Steel Shell) adopts 304 stainless steel for its housing to ensure good impact resistance, heat...
$12.30 AUD, inc GST
RS485 MODBUS-RTU Soil Temperature and Moisture Sensor for Arduino (IP68, 5-30V)
Brand: DFRobot
The soil sensor can accurately measure soil temperature and moisture. It communicates data via the MODBUS-RTU protocol over RS485. With IP68 protection...
$46.25 AUD, inc GST
Gravity: Analog Electrical Conductivity Sensor /Meter V2 (K=1)
Brand: DFRobot
DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
$124.95 AUD, inc GST
SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable
Brand: Adafruit
Take your next outdoor sensor project to the next level with this SHT-30 based temperature/humidity sensor. The sensor includes a dual-use sensor module from Sensirion...
$53.70 AUD, inc GST
MODBUS-RTU RS485 4-in-1 Soil Moisture, Temperature, pH & EC Sensor (IP68, 5-30V)
Brand: DFRobot
The integrated 4-in-1 soil tester is an IP68-rated sensor for soil temperature, moisture, pH, and EC monitoring. Ideal for agriculture, environmental...
$114.95 AUD, inc GST
Digital Thermometer
Brand: DFRobot
Are you still looking for a low cost thermometer? Did you get one? Aha! Here it is! This is a new waterproof digital thermometer with display. It is suitable for greenhouse, fish tank, swimming pool and other application scenarios which require temperature measurement. It is completely waterproof to a depth of one meter for long time. And it can continuously work for half the year with only 2 AG13 button cell.
$3.35 AUD, inc GST
One-Wire Ambient Temperature Sensor - MAX31820
Brand: Sparkfun
The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over...
$9.55 AUD, inc GST
SHT30 Temperature And Humidity Sensor - Wired Enclosed Shell
Brand: Adafruit
Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory.
$18.45 AUD, inc GST
Similar matches
DHT22 Temperature and Relative Humidity Sensor Module
Brand: Core Electronics
The DHT22 is a step up from the older DHT11 and has some improved features.
$3.75 AUD, inc GST
DHT11 Temperature and Relative Humidity Sensor Module
Brand: Core Electronics
The module can detect surrounding environment of the humidity and temperature.
$1.40 AUD, inc GST
PiicoDev Precision Temperature Sensor TMP117
Brand: PiicoDev
Accurate to ±0.1°C (across -20°C to +50°C) with no calibration required.
$9.60 AUD, inc GST
DHT22 Module (Temperature and Humidity)
Brand: Core Electronics
Accurately measure temperature and humidity with the DHT22 module. Ideal for DIY weather stations or automatic plant watering systems. Only one pin required for temperature and humidity readings.
$9.40 AUD, inc GST
SHT31 Digital Temperature & Humidity Sensor Breakout
Brand: DFRobot
This DFRobot SHT31 digital temperature and humidity sensor is based upon the Sensirion SHT31 sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated...
$14.90 AUD, inc GST
BMP280 Digital Pressure Sensor Module(V1.0)
Brand: DFRobot
This is a breakout version of BMP280 Barometric Pressure Sensor from DFRobot with temperature and pressure measurement functions, supporting Arduino code control...
$9.60 AUD, inc GST
DHT11 Temperature and Humidity Sensor
Brand: DFRobot
This DHT11 Temperature and Humidity Sensor features a calibrated digital signal output with the temperature and humidity sensor complex. Its technology ensures the high reliability and excellent long-term stability. A high-performance 8-bit microcontroller is connected. This sensor includes a resistive element and a sense of wet NTC temperature measuring devices. It has excellent quality, fast response, anti-interference ability and high cost performance advantages.
$8.10 AUD, inc GST
DS18B20 Digital temperature sensor + extras
Brand: Adafruit
These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog...
$7.45 AUD, inc GST
TMP36 - Analog Temperature sensor - TMP36
Brand: Adafruit
Wide range, low power temperature sensor outputs an analog voltage that is proportional to the ambient temperature. To use, connect pin 1 (left) to power (between...
$5.30 AUD, inc GST
Ultrasonic 9-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light, Noise)
Brand: DFRobot
The RS485 all-in-one weather sensor measures wind speed & direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise...
$384.95 AUD, inc GST
LM35DZ Temperature Sensor
Brand: Core Electronics
Linear analogue output Temperature Sensor.
$2.90 AUD, inc GST
BMP388 Digital Pressure Sensor Module
Brand: DFRobot
This is a newly-introduced Breakout version of BMP388 Sensor from DFRobot with pressure and temperature measurement. It supports Arduino code control, and the BMP388...
$11.65 AUD, inc GST
One Wire Temperature Sensor (Seeed Studio)
Brand: Seeed Studio
This 2m long One Wire Temperature Sensor has a waterproof probe and long wire shape, suitable for immersive temperature detection. The chip inside this...
$18.85 AUD, inc GST
BME680 Environmental Sensor Module
Brand: DFRobot
BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer...
$29.90 AUD, inc GST
Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
Brand: Adafruit
Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally Adafruit have some that have a true I2C interface for...
$27.45 AUD, inc GST
Gravity: AHT20 Temperature and Humidity Sensor
Brand: DFRobot
The AHT20 is a high-precision but low-cost temperature and humidity sensor, which is equipped with an improved MEMS semiconductor capacitive humidity...
$8.30 AUD, inc GST
18B20 Temerature Sensor (Arduino Compatible)
Brand: DFRobot
DS18B20 is a digital temperature sensor which is from DALLAS U.S. It can be used to quantify the environmental temperature testing.
$9.45 AUD, inc GST
Zooz ZSE44 AU Temperature/Humidity Sensor
Compact Z-Wave temperature and humidity sensor for smart homes - accurate readings, easy hub integration and low-power battery operation for automations.
$51.70 AUD, inc GST
Ultrasonic 7-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light)
Brand: DFRobot
Get precise 7-in-1 weather data: ultrasonic wind, temp, humidity, rain & more with this RS485 station. Modbus & Arduino ready. Start robust monitoring!...
$429.95 AUD, inc GST
Pimoroni 3-in-1 Environmental Sensor Stick - Qw/ST Compatible
Brand: Pimoroni
Discover Pimoroni's 3-in-1 Environmental Sensor Stick featuring temperature, pressure, humidity, light, proximity, and motion sensing capabilities with convenient Qw/ST connectivity for seamless integration into your electronics projects.
$36.30 AUD, inc GST
LM35 Analog Linear Temperature Sensor
Brand: DFRobot
The DFRobot LM35 Linear Temperature Sensor is based on the semiconductor LM35 temperature sensor. The DFRobot LM35 Linear Temperature Sensor can be used to detect ambient air temperature.
$7.55 AUD, inc GST
Grove - AHT20 I2C Industrial Grade Temperature and Humidity Sensor
Brand: Seeed Studio
AHT20 is a new generation of temperature and humidity sensor embedded with a dual-row flat and no-lead SMD package, suitable for the reflow soldering.
$9.05 AUD, inc GST
Industrial-grade MODBUS RS485 H2S Sensor - with Waterproof Aviation Connector
Brand: Seeed Studio
The S-H2S-01 is an electrochemical detection of solid polymers with a revolutionary innovative technic in electrochemical detection area with widely applications in farming area, industry area and meteorological monitoring.
$294.95 AUD, inc GST
Adafruit LPS35HW Water Resistant Pressure Sensor
Brand: Adafruit
Sometimes you need to sense pressure in a damp environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure. For...
$21.60 AUD, inc GST
Humidity and Temperature Sensor - DHT20
Brand: Sparkfun
The DHT20 is a low cost humidity and temperature sensor with a I2C digital output protocol. It can be applied to HVAC, dehumidifier, automatic control, data loggers...
$15.65 AUD, inc GST
AM2320 Digital Temperature and Humidity Sensor
Brand: Adafruit
This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I2C interface! That's...
$7.60 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.