Search results for: 'arduino uno r3'

This is a slim and sleek case for your Arduino Uno R3. The Slim for Arduino Uno offers protection from short circuits while still allowing full access to the pins. Made by us, in Newcastle.

The Arduino Motor Shield allows your arduino to drive DC and stepper motors, relays and solenoids.

Here's a handy Arduino shield: Adafruit have had a lot of people looking for a dedicated and well-designed data logging shield. Adafruit worked hard to engineer an inexpensive...

This RS232 shield is designed for the Arduino controller,and it can easily convert UART to RS232 interface. The shield integrates DB9 connectors (female) that provide connection to various devices with RS232 interface. Also the RS232 headers will facilitate your connections and commissioning. It provides the welding areas to make full use of extra space on it, which is highly convenient for prototyping. It provides a run / program mode switch. When switched OFF, you'll be able to programme the Arduino controller; When switched ON, you can use the shield normally. Gold immersion PCB. Long pins on the back that are compatible with most Arduino controllers.

Mount Arduino boards securely on 35mm DIN rails with KKSB's industrial mounting bracket, compatible with UNO R4 WiFi, UNO R3, Mega, and Giga boards for professional control cabinet installations.

Do you want to do some projects with stepper motors such as a drafting instrument, a 3D printer, an auto curtain......? As we all know, regular stepper motors are hard to drive, but with this stepper motor shield, you can easily drive 2 stepper motors via just 6 digital I/O pins

These headers are made to work with the Arduino Uno R3, Leonardo and new Arduino boards going forward. They are the perfect height for clearing the USB-B connector and great for stacking multiple shields. This kit includes 4 headers (2 8-pin, 1 10-pin and 1 6-pin), enough to connect a shield to an Arduino board. These are the same headers we use in our tutorials and with our own shields.

Easily change I2C sensor addresses with DFRobot’s plug-and-play I2C address shifter. Fix I2C conflicts, support multiple sensors, and simplify wiring....

The name says it all on this one. An ATmega328 in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.

This new Adafruit shield makes it easy to use a 16x2 Character LCD. Adafruit really like the RGB LCDs Adafruit stock in the shop both the RGB negative and RGB positive. Unfortunately...

This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.

Unleash your creativity with the Official Arduino Starter Kit! This comprehensive kit has everything you need to learn electronics and build 15 innovative projects, including a spaceship interface, color mixing lamp, and more. Perfect for makers looking to dive into the world of Arduino!

This is a transparent plastic Arduino case, which is specially designed for Arduino UNO R3. It is made of ABS material, which has good strength and tenacity. We have...

This DIN Rail Mount Bracket provides quick and easy mounting for Arduino, which allows you to conveniently build up your Arduino-related applications...

This prototyping shield is the best out there (well, we think so, at least), and now is even better with Version R3 - updated for the most compatibility with just...

The next generation Proto-ScrewShield is a dual-purpose prototyping shield. Not only does it have a large 0.1" grid prototyping area but it also extends the Arduino...

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down. This shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer, compass, and gyroscope. The shield boosts the battery voltage to power the Arduino, and it breaks out the Arduino I/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.

Gravity Starter Kit for Arduino is an open-source, plug&play electronics toolkit that provides Arduino beginners and makers with the easiest experience of learning and playing with the Arduino platform.

This Arduino programming learning kit based on Mind + graphical programming. It aims to help you learn coding from lighting an on-board LED lights to ...

Simply mount your MKR1000 to this new adapter and plug in any of your UNO shields!

Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. This motor shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output current up to 2A each channel. Stack up this shield on your controller and drive motors with higher power requirements. Depending on the motor of choice, you can make it fast or handle a higher payload. This Arduino Compatible Motor Shield (2A) uses L298P chip which allow to drive two 7-12V DC motors with maximum 2A current. This shield can be directly mounted onto standard Arduino Duemilanove and Arduino Mega.

This adapter board allows you to use our range of Raspberry Pi boards with the Arduino Uno, Genuino UNO and other Arduino boards which use the same pin layout as the Uno design.

The MyoWare® 2.0 Link Shield is designed to easily connect a MyoWare® 2.0 Muscle Sensor to your Arduino via a 3.5mm TRS-to-TRS cable to link the boards...

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped...

Includes! Adafruit data logger shield for Arduino 4 GB SD card Photocell Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25 Temperature sensor (-40 degC to 125...

This new Adafruit shield makes it easy to use a 16x2 Character LCD. The 16x2 Character LCD is NOT, repeat, NOT, included Adafruit really like the range of LCDs Adafruit stock...

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - Adafruit have tested it for sure with the Arduino UNO R3, Adafruit Metro and...

Monitor CO2 levels reliably with Industrial RS485 Infrared CO2 Sensor. Featuring NDIR tech, IP65 protection, and Modbus-RTU for easy integration. Ideal...

Make your projects rock solid with the Prototyping Shield. It makes it easy for you to design custom circuits and solder electronics directly on it.

The MyoWare® 2.0 Muscle Sensor Development Kit is an Arduino-compatible, EMG sensor kit that provides you with every board from the MyoWare ecosystem...

The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables...

The MyoWare® 2 Muscle Sensor Development Kit is an Arduino-compatible, all-in-one electromyography (EMG) sensor kit that provides you with all the boards...

Adafruit have taken Adafruit's popular Adafruit PN532 breakout board and turned it into a shield - the perfect tool for any 13.56MHz RFID or NFC application. The Adafruit NFC shield...

This is 8 digital bits serial LED display. It features a flick free display and 3-Wire interface which allows more than 2 modules can be serial linked. With our interface shield, this module can be plug and play.