Search results for: 'ethernet breakout'
RJ45 Breakout
Brand: Core Electronics
A simple breakout for the common RJ45 connector.
$1.90 AUD, inc GST
Breakout Board for RJ45
Brand: Sparkfun
RJ45 connectors are the kind that are used for Ethernet jacks, but they make great general purpose connectors when you need a lot of conductors. This is a small PCB that brings out the pins of the RJ45 connector to an in-line 0.1" footprint. Use with break-away headers for breadboarding or create your own RJ45 cable. Check the related items for Ethernet cable and connectors to go with it!
$2.55 AUD, inc GST
SparkFun RJ45 MagJack Breakout
Brand: Sparkfun
This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbed Starter Kit and breaks out each pin from the ethernet jack. This rev of the breakout is equipped with the RJ45 MagJack connector already soldered to the board which mean you no longer need to solder the connector to the board yourself or worrying about buying them separately!
$13.35 AUD, inc GST
Ethernet RJ45 Female Plug Terminal Block
Brand: DFRobot
This Ethernet RJ45 Female Plug to 8-PinTerminal Block consists of a standard RJ45 Ethernet port and a terminal block, which can be used without soldering...
$9.40 AUD, inc GST
ENC28J60 Ethernet LAN Network Module
Brand: Core Electronics
Microchip ENC28J60 controller with SPI interface ready to prototype with.
$8.55 AUD, inc GST
RJ-45 Terminal Block to Ethernet Socket Adapter
Brand: Adafruit
If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet socket - this adapter will come in very handy!
$14.15 AUD, inc GST
Adafruit Wiz5500 Ethernet Co-Processor Breakout Board
Brand: Adafruit
Wireless is wonderful, but sometimes you want the strong reliability of a wire. If you want to incorporate an Ethernet port as a great addition to your...
$34.95 AUD, inc GST
Ethernet RJ45 Male Plug Terminal Block
Brand: Adafruit
If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use...
$11.90 AUD, inc GST
RJ-45 Ethernet Female Socket to Terminal Spring Block Adapter
Brand: Adafruit
If you need to connect an RJ-45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required
$15.25 AUD, inc GST
Ethernet RJ45 Female Socket Push-Terminal Block
Brand: Adafruit
If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that doesn't have an Ethernet jack - this adapter will come in very handy! No soldering required...
$12.15 AUD, inc GST
Ethernet Kit for Teensy 4.1
Brand: Teensy
This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1...
$16.10 AUD, inc GST
W5100 Ethernet + SD Card Shield (Arduino Compatible)
Brand: Core Electronics
The Ethernet Shield for Arduino is based on the Wiznet W5100 and connects your Arduino-compatible board to the internet a few minutes. Simply plug this module onto board, connect it to your network with an RJ45 cable (not included) and follow a few simple instructions to start controlling your world through the internet.
$9.15 AUD, inc GST
RJ-45 Ethernet Round Panel Mount Adapter Plug
Brand: Adafruit
If you need to add a panel-mount connection for Ethernet, but don't have the time or ability to cut a custom oval or square hole, this RJ-45 Ethernet Round Panel...
$12.70 AUD, inc GST
Arduino Ethernet Shield 2
Brand: Arduino
The Arduino Ethernet Shield 2 connects your Arduino board to the internet.
$51.15 AUD, inc GST
RJ45 8-Pin Connector
Brand: Sparkfun
These are simple through-hole RJ45 sockets with PCB mounting posts. These 8-pin connectors are commonly used in conjunction with Cat5, Cat5e, and Cat6 Ethernet cables. Because Ethernet cable is so ubiquitous, these are awesome for projects where you need to string a lot of modules together over a distance.
$3.55 AUD, inc GST
Ethernet and PoE Shield for Arduino - W5500 Chipset
Brand: DFRobot
The W5500 Ethernet expansion board for Arduino integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects....
$50.35 AUD, inc GST
Adafruit Ethernet FeatherWing
Brand: Adafruit Feather
Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet...
$39.80 AUD, inc GST
RJ45 Ethernet MagJack-Compatible
Brand: Sparkfun
Ethernet is now ubiquitous with embedded systems. Before you can get your set-top box on the internet, you’ll need one of these single port, RJ45 ethernet jacks with built in transformer (magnetics), status LEDs, and shielding.
$5.70 AUD, inc GST
M.2 (A+E Key) to Gigabit Ethernet Module for LattePanda
Brand: DFRobot
This M.2 Gigabit Ethernet Adapter can switch out an RJ45 Gigabit Ethernet port through the M.2 slot of the main controller. It is a high-performance 10/100/1000...
$36.90 AUD, inc GST
PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet
Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.
$32.45 AUD, inc GST
WisBlock Ethernet Module WIZnet W5100S-L RAK13800
Brand: RAKwireless
Extend WisBlock with 10/100 Base-T Ethernet via SPI using WIZnet W5100S, featuring PoE headers, Wake-on-LAN, power-down modes and auto-MDIX negotiation.
$15.10 AUD, inc GST
W5500 Ethernet with POE Control Board(Arduino Compatible)
Brand: DFRobot
W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects.
$77.30 AUD, inc GST
Ethernet Shield for Arduino - W5200
Brand: DFRobot
This Arduino-sized Ethernet Shield is based on the Wiznet W5200 Ethernet Chip, and provides an easy way of getting your Arduino Online. Fits all version of arduino Main board,e.g.UNO, mega 2560. To start, just plug this module onto your Arduino board, connect it to your network with an CAT 5 Ethernet Cable (not included) and follow a few simple instructions, you will be able to explore the world with internet. The pin layout also allows another shield to be stacked on top. An aluminum alloy radiator is placed onto W5200 chip to release excessive heat.
$35.85 AUD, inc GST
Similar matches
8-ch Ethernet Relay Module (B)
Brand: Waveshare
8-ch Ethernet Relay Module (B) With Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits,...
$76.35 AUD, inc GST
8-ch Ethernet Relay Module
Brand: Waveshare
8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits, Industrial Grade...
$68.05 AUD, inc GST
SparkFun Load Sensor Combinator (Ver. 1.1)
Brand: Sparkfun
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s nest of wires. The Load Sensor Combinator was created to combine the 12 wires found in a bathroom scale into the standard four-wire Wheatstone bridge configuration.
$4.75 AUD, inc GST
RS-485 Breakout
Brand: Sparkfun
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount of power and can operate from a single +3.3VDC supply.
$20.80 AUD, inc GST
Panel Mount Ethernet Extension Cable
Brand: Adafruit
This handy Ethernet extension cable will make it easy for you to enclose a device that has an Ethernet port. We think this would be most useful when putting a Beagle...
$11.75 AUD, inc GST
Blue Cat5e U/UTP LAN Data Cable (per metre)
Brand: Core Electronics
If you need data and power somewhere far from your control box - grab some of this cable!
$2.10 AUD, inc GST
Arduino Portenta Breakout
Brand: Arduino
Arduino Portenta Breakout board is designed to help hardware engineers and makers to prototype and help test devices connections and capacity within the Portenta family boards (e.g. the Portenta H7). It makes all high-density connectors’ signals individually accessible, making it quick and easy to connect and test external hardware components and devices as normally needed during development in the lab.
$93.95 AUD, inc GST
Ultimate Retro Game Console
Brand: RetroPie
As the name implies, this is our complete retro gaming kit which comes with everything you need to relive all your retro games from classic consoles including NES, SNES, Sega, Atari, just to name a few. With Bluetooth controllers!
$409.12 AUD, inc GST
SparkFun GNSS Flex pHAT - mosaic-X5
Brand: Sparkfun
The SparkFun mosaic-X5 GNSS Flex pHAT is a development platform for the SparkFun GNSS Flex system. Designed to interface with a Raspberry Pi or comparable...
$1049.95 AUD, inc GST
Single Pair Ethernet Cable - 0.5m (Shielded)
Brand: Sparkfun
This 0.5m SPE cable enables Ethernet data transmissions by using only two wires and the simultaneous power supply for terminals via a Power over Data Line...
$41.25 AUD, inc GST
SparkFun MicroMod mikroBUS Starter Kit
Brand: Sparkfun
The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side...
$154.95 AUD, inc GST
LinkIt Smart 7688 (Seeed Studio)
Brand: Seeed Studio
The Linklt Smart 7688 development platform offers two developments boards: Linklt Smart 7688: MPU only. Powered by Media Tek MT7688. Linklt Smart 7688...
$44.90 AUD, inc GST
USB Serial Light Adapter (Arduino Compatible)
Brand: DFRobot
This is a new version of the FTDI breakout board features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno.
$20.70 AUD, inc GST
SparkFun Timing GNSS Breakout - mosaic-T
Brand: Sparkfun
At the heart of our Timing GNSS Breakout is Septentrio's mosaic-T, a compact, ultra-low power, multi-band, multi-constellation, high-precision GNSS timing...
$1369.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.