Search results for: 'ardupilot'

Serial Bus Servo Driver Board, Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos, Small In Size, Easy to...

Let your robotic dreams come true with the new DC+Stepper Motor Bonnet from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive...

Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement,...

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up...

This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...

General Driver board for Robots, Based on ESP32, multi-functional, supports WIFI, Bluetooth and ESP-NOW communications, Compatible with Raspberry Pi and...

Simplify ESP board programming with this universal auto-programming tool featuring automated flashing, ESP-01 compatibility, and a convenient 6-pin header design for efficient development and prototyping.

The RoboClaw Solo 60 A is an intelligent motor controller designed to control one brushed DC motor at 60 Amps continuous with up to 100...

This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.

Make the Raspberry Pi Pico the core of your new robotics project with the Kitronik Compact Robotics Board for Raspberry Pi Pico.

It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds Adafruit's celebrated Ultimate GPS on it, so you...

With Arduino Alvik, innovators, students, and educators can step into the world of programming and robotics at any level - helping you go further with every move.

The Cytron Maker Pi RP2040 robot controller board features the first microcontroller designed by Raspberry Pi, the RP2040. The board has a dual-channel DC...

This CAN-to-UART and USB 1.0 communication module integrates a USB interface for easy data debugging through a serial assistant. Compatible with both 3.3V...

This Gravity: Serial Data Logger with 128MB Flash memory and USB function, can store data more conveniently and is suitable for short-time environmental...

Learn the basics of programming, coding, and electronics including current, voltage, and digital logic. No prior knowledge or experience is necessary as the kit guides you through step by step.

The RoboClaw 2x7A is an intelligent motor controller designed to control two brushed DC motors at 7.5 Amps continuous with up to 15 Amps.....

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive...

Introducing MOTION 2350 Pro, designed by Cytron, leveraging the new RP2350 processor. It has been a few years since the RP2040 was launched. Now,...

Want another CamJam EduKit 3 motor controller board? You’ve come to the right place! Our pre-soldered motor controller board has been custom-designed...

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V to 11 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Romeo family is an All-in-One Robot control board specially designed for robotics applications from DFRobot. It benefits from the Arduino open-source platform, it is supported by thousands of open source codes, and can easily be expanded with your Arduino shields

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.7 A per channel and an efficient voltage regulator that allows the controller to work with a 5.5 V to 36 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3118) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.

The third in the series is here! The CamJam EduKit #3 is focused on robotics and contains (almost) everything you need to create your very own Raspberry...

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.8 A per channel and an efficient voltage regulator that allows the controller to work with a 2.7 V to 11 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3116) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.

The SparkFun ZED-F9R GPS-RTK pHAT is a high-precision Automotive Dead Reckoning board with equally impressive configuration options...

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each...

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

Transform your innovation process with an advanced and flexible prototyping kit that includes processing power, scalability, and seamless cloud integration – for all your machine vision ideas.

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

The Roboclaw 2x45A motor controller can supply two brushed DC motors with 45 Amps continuous and up to 60 Amps peak. With its multi.....

A 6-axis IMU to measure acceleration and rotation providing comprehensive data to perfectly capture movements like pitch, roll or tilt.

The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each...

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

Transform your innovation process with an advanced and flexible prototyping kit that includes processing power, scalability, and seamless cloud integration – for all your motion and environmental sensing ideas.