Search results for: 'flight controller'

Serial Bus Servo Driver Board, Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos, Small In Size, Easy to...

The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver. The fully assembled version ships with header pins installed.

This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20") away with a pulsed signal similar to a hobby servo control ...

The RoboClaw Solo 60 A is an intelligent motor controller designed to control one brushed DC motor at 60 Amps continuous with up to 100...

The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed.

The Roboclaw 2x60A motor controller by Ion Motion Control can supply two brushed DC motors with 60 Amps continuous and up to 120 Amps.....

The 12-channel Mini Maestro 12 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed.

Drive four servo motors from your Pimoroni Yukon project, with either regulated or direct power...

This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for...

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

Control Your Servo’s Speed!Just plug the Servo Speed Tuner between your servo and your receiver, then adjust the.....

Harder, better, faster, stronger! All the control and customization for your robot project. The Parallax Feedback 360° High Speed Servo has the functionality of...

Provides up to five analog control channels and over ten customizable buttons, improving overall control efficiency.

Supports NTRIP and is capable of centimeter-level positioning accuracy.

The Best Toys are not just for fun, but for deep experience and knowledge. Learn while playing. Science, Technology, Engineering, Art and Mathematics (STEAM), AirWood is not just a toy, it is an engineering project for your kids.

You get 4 chassis in the same kit! With this kit, you can build up to 4 different drones with an extremely modular and flexible configuration.

The Best Toys are not just for fun, but for deep experience and knowledge. Learn while playing. Science, Technology, Engineering, Art and Mathematics (STEAM), AirWood is not just a toy, it is an engineering project for your kids.

Equipped with ESP32-S3-WROOM-1U-N16R8 module and camera, the Romeo ESP32-S3 development board is perfect for customize robotics like intelligent obstacle...

Add a camera, a laser beam emitter, or even a remote cannon on your robots and drones! This is a useful FPV nylon Pan and Tilt for multiple uses. It is compatible with most 9~12g small servos. With this holder, you could easily mount camera or many other small modules on on the servo. The only limit? Your imagination.

The Roboclaw 2x45A motor controller can supply two brushed DC motors with 45 Amps continuous and up to 60 Amps peak. With its multi.....

Specially designed for Tello's propellers, these propeller guards help reduce the risk of damage or injury.

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. This fully-assembled version ships with header pins installed.

The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25 μs resolution with built-in speed and acceleration control) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this tiny, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

The Servo Monitor is a tool that allows you to easily check servo vitals. Just plug a servo controller into one side and a servo into the.....

Drive four servo motors from your Pimoroni Yukon project, with either regulated or direct power...

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

Ever wanted to drive a ton of Dynamixel AX/MX servos from an Arduino? This shield makes it easy!

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V to 11 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Direct Drive Servo Motor Driver Board (B), Integrates ESP32 and Control Circuit, 2.4G WiFi Support, Suitable for DDSM400 Hub Motor, ESP Now Support...

35KG.CM CF35-12 Bus Servo, High Precision And Large Torque, Aluminum Alloy Case, With Programmable 360° Magnetic Encoder, Multiple Operation Modes...