Search results for: &#039;arduino relay module&#039;

A versatile relay board with opto-isolated inputs. Each channel can switch up to 10A @28VDC

$6.40 AUD, inc GST

5V Single Channel Relay Module 10A

A versatile, compact relay board that can drive up to 10A @28VDC while only drawing approximately 60mA at 5V.

$3.95 AUD, inc GST

Securely control inductive loads and execute complex automated logic directly from the edge. The Waveshare ESP32-S3-ETH-8DI-8RO-C integrates eight isolated 10A relays, an onboard CAN interface, and robust dual-core processing into a DIN-rail enclosure.

$84.25 AUD, inc GST

Industrial Modbus RTU 8-ch Relay Module (D)

Industrial Modbus RTU 8-ch Relay Module (D) With Digital Input and RS485 Interface, Multi Isolation Protection Circuits, 7~36V Power Supply...

$61.80 AUD, inc GST

Relay Module V2 (Arduino Compatible)

The DFRobot Single Relay blocks the number of electronic modules. It can be used in interactive projects. It can also be used to control the lighting, electrical and other equipments. The modular design makes it easy to expand with the Arduino board (not included). The Relay output state by a light-emitting diode. It can be controlled through the digital IO port, such as solenoid valves, lamps, motors and other high current or high voltage devices.

$4.60 AUD, inc GST

Gravity: Magnetic Latching Relay for ESP32 / Arduino

This DFRobot magnetic latching relay is a new type of relay. It remains in the last position it was when last powered and features noiseless and low power...

$11.65 AUD, inc GST

8 Channel Solid State Relay Module (DC Control, AC Loads)

This breakout module gives you access to a 8 channel solid state relay that can be switched with 3-5VDC

$26.75 AUD, inc GST

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 12 V relay, 5.0 mm terminal blocks for the switch connections, and straight 0.1" male header for the control connections. The included power relay is an Omron G5LE-14-DC12 and is rated for up to 10 A under most conditions.

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Assembled)

Brand: Pololu

$14.70 AUD, inc GST

2 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 2 channel solid state relay that can be switched with 3-5VDC

$5.40 AUD, inc GST

The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards...

Grove - Relay (Seeed Studio)

Brand: Seeed Studio

$5.90 AUD, inc GST

Modbus RTU 32-Ch Relay Module

Modbus RTU 32-Ch Relay Module, RS485 Interface, With Multiple Isolation Protection Circuits, Industrial-Grade, Rail-Mount Case

$119.95 AUD, inc GST

Arduino Pro Opta Ext D1608S enhances your Arduino Opta’s real-time control, monitoring and predictive maintenance applications with the addition of 16...

Arduino Opta Ext D1608S

Brand: Arduino

$279.95 AUD, inc GST

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)

Brand: Pololu

$13.20 AUD, inc GST

Gravity: Easy Relay Module

The traditional relay module has complicated wiring and is not friendly to beginners or students. The simple switch module simplifies the wiring method for connecting...

$13.66 AUD, inc GST

Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller?...

SparkFun Qwiic Single Relay

Brand: SparkFun

$30.90 AUD, inc GST

Out of stock

4 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a 4 channel solid state relay that can be switched with 3-5VDC

$15.35 AUD, inc GST

1 Channel Solid State Relay Module (DC Control, AC Load)

This breakout module gives you access to a single channel solid state relay that can be switched with 3-5VDC

$4.70 AUD, inc GST

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC5 5 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions.

Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)

Brand: Pololu

$13.05 AUD, inc GST

16A Relay Module (Arduino Compatible)

A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit.It is actually "automatic switch" ,using a small electric current to control a larger current.

$16.18 AUD, inc GST

The SparkFun Qwiic Quad Relay is a unique power accessory board that has been designed for switching not one but four high powered devices from your Arduino or another...

SparkFun Qwiic Quad Relay

Brand: SparkFun

$61.75 AUD, inc GST

Out of stock

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control...

Adafruit Non-Latching Mini Relay FeatherWing

Brand: Adafruit

$14.55 AUD, inc GST

SparkFun Beefcake Relay Control Kit

Brand: SparkFun

Your 5V system can wield great power with this big, beefy relay board. How does 10A on the NC contacts and 20A on the NO contacts sound? The SparkFun Beefcake Relay Control Kit contains all the parts you need to get your high-power load under control. Only minimal assembly is required!

$19.45 AUD, inc GST

Out of stock

8-ch Ethernet Relay Module (B)

8-ch Ethernet Relay Module (B) With Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits,...

$76.35 AUD, inc GST

Industrial 8-Channel ESP32-S3 WiFi Relay Module (Isolated RS485)

Safely control circuits and isolate logic inputs. Driven by an ESP32-S3, this DIN-rail mountable hub features robust optocoupler isolation and comprehensive connectivity, including RS485.

$61.34 AUD, inc GST