Search results for: '256x64 oled display'

Looking for an OLED display to add to your DIY projects? Check out our White I2C OLED display with a 0.96-inch screen and 3.3V input compatibility. Easily print text and draw shapes with this go-to maker display using the SSD1306 driver.

Display text, draw shapes, animations, and even create plots.

A great display for showing information from a microcontroller.

Add a split colour display to your project, perfect for menu's and displaying data.

1.3" OLED Display module an Embedded SH1107 Driver, Using SPI/I2C Bus.

These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

This 0.96” OLED display module uses the SSD1306 drive chip, has 128x64 self-illuminating white pixels, and adopts two communication methods: SPI/ I2C, I2C in default...

A small 2.00 Inch 240x320 IPS TFT display driven by the ST7789 display driver...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally,...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

Here is the Zio Qwiic 1.5inch 128 x 128 pixels OLED display module. It can display a maximum of 16 lines of text content, and display pictures and animation on its...

The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a small 0.91in. (diagonal) frame...

This OLED goes out to all the fans who want more pixels! Normally Adafruit's 128x64 OLEDs are the biggest ones Adafruit have stocked that can use I2C. This one is a whopping 128x128 pixels and it even has an extra bonus - it can do grayscale pixels! Yep, you get the same crispness of a monochome OLED but with 16 levels of grayscale.

The SparkFun Qwiic OLED 1.3in. is a Qwiic-enabled monochrome OLED that displays crisp white-on-black images and text...

Display meaningful output from your micro:bit project with the Kitronik :VIEW Graphics128 OLED display. Add a monochrome 128x64 display to the BBC...

If you're looking for the most compact lil' display for a Raspberry Pi (most likely a Pi Zero) project, this might be just the thing you need! The Adafruit 128x32...

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED...

The Grove - OLED Display 1.12 V3.0 (SH1107) is a monochrome display with 128*128 resolution. It has a lower price, user-friendly design and better...

1.83inch LCD Display Module, 240×280 Resolution, SPI Interface, IPS LCD, 65K Colors, Rounded Corners, Micro LCD Display...

This lovely little display breakout is the best way to add a small, colorful, and very bright display to any project.

1.8inch diagonal, 128x160 pixels, with embedded controller, communicating via SPI interface.

These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Small size, the length...

The Grove - OLED Display 0.66" (SSD1306) is a monochrome display with 64×48 resolution. It contains a user-friendly design and outstanding performance with Grove I2C interface in 20mm×20mm ultra-small size.

Grove - OLED Display 0.96" is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this display module...

This is a 128x64 liquid crystal display that support Chinese character , English characters and even graphics, very suitable for interactive work with Arduino.

This 5.0" TFT screen has lots of pixels, 800x480 to be exact, and an LED backlight. Its great for when you need a lot of space for graphics. These screens are commonly...

If you've been diggin' Adafruit's monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

If you've been diggin' Adafruit's monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3" diagonally, ...

This is a screen for advanced hackers who like the look of the OLED screen we've put into the Adafruit MACROPAD RP2040. This is just the raw...

This is a 5.5" mini-HDMI OLED-Display with Capacitive Touchscreen. It has 1920×1080 HDMI high-definition output and comes with a capacitive touch panel on its screen...

These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. This display is made of 128x32 individual white...

This OLED goes out to all the fans who want more pixels in a smaller size! Normally our 128x64 OLEDs are the biggest ones we've stocked that can use...

An OLED module for the 4tronix BitBot XL, MiniBit and the Robobit Mk3(V1.3)

Grove - OLED 1.12'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 1.12" is constructed...