Search results for: 'rs485 can hat'
RS485 CAN HAT for Raspberry Pi
Brand: Waveshare
RS485 CAN HAT For Raspberry Pi, Allows Stable Long-Distance Communication
$22.75 AUD, inc GST
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections
Brand: Waveshare
Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections...
$36.05 AUD, inc GST
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT For Raspberry Pi, Dual Chips Solution, Stackable Design For Expanding Multiple CAN Channels, Built-In Multi...
$41.25 AUD, inc GST
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
Brand: Adafruit
Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug...
$3.90 AUD, inc GST
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT
Brand: Adafruit
If you'd like quickly get started with CAN bus interfacing, with no soldering required, our Adafruit RP2040 CAN Bus Feather comes ready-to-rock with a...
$37.60 AUD, inc GST
I2C CAN-BUS Module based on MCP2551 and MCP2515
Brand: Seeed Studio
We launched the Serial CAN Bus Module years ago, which is very practical and easy to use. Now we have slightly modified the Serial CAN Bus...
$36.65 AUD, inc GST
USB to RS422/RS485 Cable
Brand: DFRobot
The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ports.
$43.70 AUD, inc GST
USB to RS485 Serial Cable
Brand: DFRobot
This USB to RS485 serial cable with built-in CH340 chip allows to directly realize the communication between PC and 485 device without extra wire...
$8.40 AUD, inc GST
Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller
Brand: Adafruit
Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell CAN Bus is in stock and ready to assist your...
$23.20 AUD, inc GST
M5Stack COMMU Module Extend RS485/TTL CAN/I2C Port
Brand: M5Stack
COMMU is a Muti-Communication-Interface-Converter. Integrated with 2IIC, 1TTL, 1CAN, 1RS485. Apparently COMMU has packed with most of series communications.
$20.70 AUD, inc GST
RS485 to RJ45 Ethernet Serial Server (C)
Brand: Waveshare
Industrial serial server, RS485 to RJ45 Ethernet, TCP/IP to serial, rail-mount support, with POE function(optional) | RS485 TO ETH (B)...
$31.70 AUD, inc GST
2-Channel Isolated CAN Expansion HAT for Raspberry Pi, Dual Chips Solution
Brand: Waveshare
2-Channel Isolated CAN Bus Expansion HAT for Raspberry Pi, MCP2515 + SN65HVD230 Dual Chips Solution, Multi Onboard Protection Circuits...
$33.95 AUD, inc GST
Industrial Modbus RTU 8-ch Relay Module with RS485 Interface
Brand: Waveshare
Industrial Modbus RTU 8-ch Relay Module with RS485 Interface, Multi Isolation Protection Circuits, 5V Power Supply...
$53.40 AUD, inc GST
RS485 Expansion HAT for Raspberry Pi - 2-Channel Isolated
Brand: Waveshare
This is a 2-channel isolated RS485 expansion HAT designed for Raspberry Pi, adopts the SC16IS752+SP3485 solution, with embedded protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc.
$31.85 AUD, inc GST
RS485 Connector Expansion Shield for LattePanda V1
Brand: DFRobot
An industrial-grade RS485 shield for LattePanda! It is designed to expand a reliable RS485 interface(OPEN4) for LattePanda V1. The receiving and sending of the module...
$41.95 AUD, inc GST
Portenta HAT Carrier
Brand: Arduino
Prototype like a pro, add automation or raise the bar in robotics: Portenta Hat Carrier makes high performance easy for you.
$86.80 AUD, inc GST
Similar matches
Industrial USB to RS485 Converter
Brand: Waveshare
This is an industrial USB to RS485 converter with original FT232RL and SP485EEN inside. It features embedded protection circuits such as lightning-proof, resettable fuse, ESD protection, and TVS diode, etc. It's pretty small in size.
$17.90 AUD, inc GST
Raspberry Pi 5 M.2 HAT+
Brand: Raspberry Pi
Connect M.2-format PCIe and NVMe devices to your Raspberry Pi 5 with the M.2 HAT.
$21.29 AUD, inc GST
MAX485 - TTL UART to RS485 Converter Module
Brand: Core Electronics
Going from TTL to RS485 is made simple by this prototyping friendly module. On one side of the board are the TTL IOs, and on the other are the RS485. At the core is a MAX485 which is powered by 5V.
$3.40 AUD, inc GST
Adafruit CAN Pal - CAN Bus Transceiver - TJA1051T/3
Brand: Adafruit
If you'd like to connect a board with native CAN Peripheral support, the Adafruit CAN Pal Transceiver will take the 3V logic level signals and convert...
$7.15 AUD, inc GST
Industrial 6-Channel ESP32-S3 WiFi Relay Module
Brand: Waveshare
Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi / Bluetooth / RS485 control, Onboard RS485 / Pico HAT interfaces, With Multiple Isolation...
$52.30 AUD, inc GST
USB to RS485 Converter (FT232)
Brand: Core Electronics
Featuring a MAX485 and FTDI232, this converter will take USB and turn it into an RS485 signal.
$3.60 AUD, inc GST
Argon Fan HAT
Brand: Argon40
This fan HAT is perfect for keeping your Raspberry Pi 4 cool.
$16.70 AUD, inc GST
USB to RS485 converter
Brand: Core Electronics
Featuring a MAX485 and CH340, this converter will take USB and turn it into an RS485 signal.
$1.80 AUD, inc GST
RS485 Shield
Brand: DFRobot
RS485 is an industrial standard for long distance, anti-interferrence and reliable communication. So we create this RS485 shield, especially designed for the Arduino controller board. It can easily convert UART/Serial protocol to RS485 protocol. This board allows Arduino access to industrial standard protocol easily.
$15.60 AUD, inc GST
RS-232 to RS-485 Converter
Brand: DFRobot
This is a simple RS232 to RS485 converter that is self powered using the TX, RX or RTS, CTS signals for power. The RS232 is DB9 female connector, and the RS485 side is a DB9 male or 4 position terminal block.
$10.90 AUD, inc GST
RS485 Temperature & Humidity Sensor
Brand: DFRobot
This is a high-precision industrial-grade RS485 temperature and humidity sensor. It uses high-quality digital integrated transducer and reliable digital processing...
$50.25 AUD, inc GST
RS-485 Breakout
Brand: Sparkfun
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can reach transmission speeds of up to 10Mbps. This board requires a very low amount of power and can operate from a single +3.3VDC supply.
$20.80 AUD, inc GST
RS485 MODBUS-RTU Soil Temperature and Moisture Sensor for Arduino (IP68, 5-30V)
Brand: DFRobot
The soil sensor can accurately measure soil temperature and moisture. It communicates data via the MODBUS-RTU protocol over RS485. With IP68 protection...
$46.25 AUD, inc GST
Industrial Grade RS485 Repeater
Brand: DFRobot
This is an industrial-grade high-performance RS485 photoelectric isolation repeater that converts one-way RS485 to one-way RS485. Compatible with EIA/TIA RS485 standard...
$93.60 AUD, inc GST
Arduino Opta RS485
Brand: Arduino
Arduino Opta is a secure, easy-to-use micro PLC with Industrial IoT capabilities.
Designed in partnership with Finder – leading industrial and building...
$294.95 AUD, inc GST
Industrial Isolated USB To 4-Ch RS485 Converter (B)
Brand: Waveshare
USB-to-RS485 converter with four isolated channels and built-in surge and ESD protection, for stable multi-OS communication in an aluminium alloy case.
$40.10 AUD, inc GST
Industrial RS485 Opto-Isolated Hub
Brand: DFRobot
This 4-Port RS485 bus split hub is specially designed to meet the requirements of RS485 large-scale systems in complex electromagnetic environments. Its transmission...
$114.95 AUD, inc GST
USB TO 8CH RS485 Industrial Grade Isolated Converter
Brand: Waveshare
USB TO 8CH RS485 Industrial Grade Isolated Converter, USB To RS485 Adapter, Multiple Protection Circuits, Wall-mount and Rail-Mount Support, Multi-OS...
$58.70 AUD, inc GST
DC Motor Driver HAT(V1.0)
Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.95 AUD, inc GST
SparkFun Qwiic HAT for Raspberry Pi
Brand: Sparkfun
The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve...
$11.20 AUD, inc GST
2-Ch RS485 to RJ45 Ethernet Serial Server
Brand: Waveshare
2-Ch RS485 to RJ45 Ethernet Serial Server, Dual channels RS485 independent operation, Dual Ethernet Ports, Rail-mount Industrial Isolated Serial Module,...
$59.95 AUD, inc GST
M5Stack RS485 to TTL Converter Unit
Brand: M5Stack
It's used to convert the TTL standard to the RS485 standard. If the outside serial device is RS485 standard, you can attach this unit onto M5stack, therefore, to implement the communication with RS485 device by TTL protocol.
$11.25 AUD, inc GST
Ultrasonic 9-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light, Noise)
Brand: DFRobot
The RS485 all-in-one weather sensor measures wind speed & direction, air temperature, relative humidity, atmospheric pressure, light intensity, noise...
$384.95 AUD, inc GST
Ultrasonic 7-in-1 RS485 Weather Sensor for Arduino (Wind, Rain, Temp, Light)
Brand: DFRobot
Get precise 7-in-1 weather data: ultrasonic wind, temp, humidity, rain & more with this RS485 station. Modbus & Arduino ready. Start robust monitoring!...
$429.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.