Search results for: &#039;power over ethernet switch&#039;

Alloy AS2008-P 8 Port Unmanaged PoE Switch (802.3at, 150 Watts)

Brand: Core Electronics

Add Power over Ethernet to your network the easy way.

$269.95 AUD, inc GST

Securely control inductive loads and execute complex automated logic directly from the edge. The Waveshare ESP32-S3-ETH-8DI-8RO-C integrates eight isolated 10A relays, an onboard CAN interface, and robust dual-core processing into a DIN-rail enclosure.

$84.25 AUD, inc GST

PCIe To M.2 E KEY Adapter HAT with PoE Function for Raspberry Pi 5 (Wireless NIC included)

PCIe To M.2 E KEY Adapter With PoE Function for Raspberry Pi 5, Compatible With NGFF (M.2 E Key) Wireless NIC, Raspberry Pi 5 PCIe HAT...

$63.40 AUD, inc GST

Cluster Enclosure for 4x Raspberry Pi and switch

The fully complete case with a compact design reserved enough space for 4 RPis, 4 2.5” SSDs, and an Ethernet switch, as well as 2 cooling fans.

$139.95 AUD, inc GST

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant...

$24.80 AUD, inc GST

Power Over Ethernet HAT (H) For Raspberry Pi 5

Power Over Ethernet HAT (H) For Raspberry Pi 5 / CM 5, 5V 5A Output, stable performance, Supports 802.3af/at network standard, Isolated Switched-mode...

$39.00 AUD, inc GST

PoE Ethernet / USB HUB BOX for Raspberry Pi Zero Series

Add 3x USB 2.0 Ports and 802.3af-Compliant PoE in a sleek package.

$47.85 AUD, inc GST

The W5500 Ethernet expansion board for Arduino integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects....

Ethernet and PoE Shield for Arduino - W5500 Chipset

Brand: DFRobot

$50.35 AUD, inc GST

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.

PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet

Brand: Adafruit

$32.45 AUD, inc GST

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...

802.3af PoE Output Data & Power Splitter - 12V 1A

Brand: Adafruit

$22.70 AUD, inc GST

UCTRONICS PoE Splitter Gigabit 5V - Micro USB Power

Supply power and transfer data to micro USB powered devices like RPi 3B+ via a single Ethernet cable

$25.45 AUD, inc GST

POE HAT With Switch and Screen

This RPi4 rerouting board with PoE functionality is specially designed for our ultimate rackmount case.

$58.50 AUD, inc GST

Rack Mount Enclosure for 4x Raspberry Pi (POE and Screen)

The ultimate rack mount enclosure for your Raspberry Pi's, with the included POE and screens you'll be able to see what your Pis are doing.

$309.95 AUD, inc GST

UPS Base Board for Raspberry Pi CM4 (with POE, Gigabit Ethernet)

Uninterruptible Power Supply for powering the CM4

$94.20 AUD, inc GST

Rack Mount Enclosure for 6x Raspberry Pi (POE HATs included)

Rackmount 6x Raspberry Pi's with POE HATs included

$364.95 AUD, inc GST

W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects.

W5500 Ethernet with POE Control Board(Arduino Compatible)

Brand: DFRobot

$77.30 AUD, inc GST

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Wouldn’t it be convenient to use the same cable for power and data? Using these power over Ethernet adapters, you can do just that!

Passive PoE Cable Set

Brand: Sparkfun

$11.60 AUD, inc GST

8-Channel RS485 to RJ45 Ethernet Serial Server (PoE, Isolated, Rail-Mount)

Industrial-grade 8-channel RS485-to-Ethernet serial server with dual RJ45 ports and PoE (IEEE 802.3af). Each of the eight RS485 channels operates independently; the rail-mount metal enclosure suits makes it easy to integrate into control cabinets.

$127.42 AUD, inc GST