Search results for: 'power over ethernet board'

Showing results for power over ethernet board

50 results

Raspberry Pi PoE+ HAT

Brand: Raspberry Pi

The plus in the title of PoE+ HAT is Raspberry Pi's signature for improvement, which this Power over Ethernet certainly is. It features support for 802.3at PoE+ with 25.5W of headroom (5Amps).

Four (4) standoffs and eight (8) screws are included for mounting the Hat to a Raspberry Pi!

$42.65 AUD, inc GST

Power Over Ethernet HAT (G) For Raspberry Pi 5 (5V, 5A)

Brand: Waveshare
The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.
$26.40 AUD, inc GST

Power Over Ethernet HAT (F) For Raspberry Pi 5

Brand: Waveshare
Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard...
$35.30 AUD, inc GST

Olimex ESP32-POE-ISO-EA Development Board

Brand: The Pi Hut
The Olimex ESP32-POE-ISO-EA is an ESP32-powered WiFi/BLE/Ethernet development board with an external antenna, Power-Over-Ethernet, galvanic isolation and...
$69.30 AUD, inc GST

8-ch Ethernet Relay Module (B)

Brand: Waveshare
8-ch Ethernet Relay Module (B) With Digital Input, Modbus RTU/Modbus TCP Protocol, PoE Port Communication, With Various Isolation And Protection Circuits,...
$76.35 AUD, inc GST

PCIe To M.2 Adapter With PoE For Raspberry Pi 5

Brand: Waveshare
PCIe To M.2 Adapter With PoE Function For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading/Writing, Supports 802.3af/at network standard, Raspberry Pi 5 PoE HAT
$39.30 AUD, inc GST

PoE Ethernet/USB HUB HAT for Raspberry Pi Zero

Brand: Waveshare
The PoE/ETH/USB HUB HAT is a PoE (Power over Ethernet) USB HUB HAT designed for Raspberry Pi Zero. By using this small HAT and some proper 802.3af-compliant power sourcing equipments, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable, along with 3x extended USB ports.
$41.25 AUD, inc GST

UCTRONICS PoE+ HAT for Raspberry Pi 5 (5V 4.5A)

Brand: UCTRONICS
UCTRONICS PoE+ HAT for Raspberry Pi 5, Power over Ethernet with Active Cooling Fan, Aluminum Heatsink, Supports IEEE 802.3af/at Network Standard, 5V 4.5A...
$50.40 AUD, inc GST

Rail-Mount Serial Server RS232/485/422 to RJ45 Ethernet Module

Brand: Waveshare
Rail-Mount Serial Server, RS232/485/422 to RJ45 Ethernet Module, TCP/IP to serial, With POE Function...
$44.10 AUD, inc GST

Waveshare Power over Ethernet HAT (D) (Pi 3B+/4B)

Brand: Waveshare
Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af-Compliant, Tailored For Raspberry Pi Official Case.
$28.05 AUD, inc GST

WIZnet PoE Power Module for Raspberry Pi Pico

Brand: The Pi Hut
Discover the WIZnet WIZPoE-P1 module, an IEEE802.3af compliant Power over Ethernet solution delivering up to 7W of power to Raspberry Pi Pico and compatible WIZnet boards through standard Ethernet cables.
$15.80 AUD, inc GST

PoE Ethernet / USB HUB BOX for Raspberry Pi Zero Series

Brand: Waveshare
Add 3x USB 2.0 Ports and 802.3af-Compliant PoE in a sleek package.
$47.85 AUD, inc GST

8-ch Ethernet Relay Module

Brand: Waveshare
8-ch Ethernet Relay Module, Modbus RTU/Modbus TCP Protocol, PoE port Communication, With Various Isolation And Protection Circuits, Industrial Grade...
$68.05 AUD, inc GST

Raspberry Pi Compute Module 5 IO Board

Brand: Raspberry Pi

All of the IO you need to get started with the Compute Module 5!

$27.30 AUD, inc GST

PCIe To M.2 Adapter With PoE Function (C) For Raspberry Pi 5

Brand: Waveshare
PCIe To M.2 Adapter With PoE Function (C) For Raspberry Pi 5, Supports NVMe Protocol M.2 Solid State Drive, High-speed Reading / Writing...
$41.30 AUD, inc GST

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant

Brand: Waveshare
Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant...
$24.80 AUD, inc GST

Raspberry Pi Compute Module 4 IO Board

Brand: Raspberry Pi
Exposing every interface from Raspberry Pi Compute Module 4, the Compute Module 4 IO Board provides a development platform and reference base-board design for Raspberry Pi's most powerful Compute Module yet.
$87.10 AUD, inc GST

PCIe To M.2 E KEY Adapter HAT with PoE Function for Raspberry Pi 5 (Wireless NIC included)

Brand: Waveshare
PCIe To M.2 E KEY Adapter With PoE Function for Raspberry Pi 5, Compatible With NGFF (M.2 E Key) Wireless NIC, Raspberry Pi 5 PCIe HAT...
$63.40 AUD, inc GST

Power Over Ethernet HAT (H) For Raspberry Pi 5

Brand: Waveshare
Power Over Ethernet HAT (H) For Raspberry Pi 5 / CM 5, 5V 5A Output, stable performance, Supports 802.3af/at network standard, Isolated Switched-mode...
$39.00 AUD, inc GST

Raspberry Pi Compute Module 5 IO Board With PoE (Kit)

Brand: Waveshare
Raspberry Pi Compute Module 5 IO Board with PoE Feature, for all Variants of CM5...
$104.95 AUD, inc GST

PoE Splitter with USB Type C - 5V 2A - 100 MB Ethernet

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices.
$32.45 AUD, inc GST

802.3af PoE Output Data & Power Splitter - 12V 1A

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$22.70 AUD, inc GST

Ethernet and PoE Shield for Arduino - W5500 Chipset

Brand: DFRobot
The W5500 Ethernet expansion board for Arduino integrates PoE power supply and W5500 Ethernet chip, which can meet the requirements of general IoT projects....
$49.27 AUD, inc GST

UPS Base Board for Raspberry Pi CM4 (with POE, Gigabit Ethernet)

Brand: Waveshare
Uninterruptible Power Supply for powering the CM4
$94.20 AUD, inc GST

UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A

Brand: UCTRONICS

UCTRONICS U6241 PoE HAT for Raspberry Pi is to use with the Raspberry Pi models with PoE pins like Raspberry Pi 3 Model B+ and Raspberry Pi 4 Model B

$41.50 AUD, inc GST

POE HAT With Switch and Screen

Brand: UCTRONICS

This RPi4 rerouting board with PoE functionality is specially designed for our ultimate rackmount case.

$58.50 AUD, inc GST

W5500 Ethernet with POE Control Board(Arduino Compatible)

Brand: DFRobot
W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects.
$75.99 AUD, inc GST

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$24.40 AUD, inc GST

UCTRONICS Mini PoE HAT for Raspberry Pi 4B/3B+ - Power Over Ethernet Expansion Board with Cooling Fan

Brand: UCTRONICS
Explore the UCTRONICS Mini PoE HAT for Raspberry Pi 4B/3B+ - a compact, efficient Power Over Ethernet expansion board with a cooling fan. Simplify your Raspberry Pi power supply with a single Ethernet cable, without blocking any connectors. Compatible with most enclosures and IEEE 802.3af compliant.
$46.25 AUD, inc GST

802.3af PoE Output Data & Power Splitter - 5/9/12V

Brand: Adafruit
Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device...
$56.90 AUD, inc GST

51W PoE Expansion Board for LattePanda IOTA (IEEE 802.3bt)

Brand: DFRobot
Simplify industrial control / edge AI / edge computing builds with the LattePanda IOTA 51W PoE board. Delivers 51W & Gigabit data over one cable via IEEE...
$70.69 AUD, inc GST

WisBlock PoE Power Slot Module RAK19017

Brand: RAKwireless

PoE module uses Silver Ag99005MT to supply 5V/9W from IEEE802.3af-compliant and featuring short-circuit and thermal protection for WisBlock projects.

$44.10 AUD, inc GST

SparkFun MicroMod Ethernet Function Board - W5500

Brand: Sparkfun
Integrate your MicroMod project into an Ethernet network including Power-over-Ethernet with the SparkFun MicroMod Ethernet Function Board...
$65.25 AUD, inc GST

5V 1.5A Output PoE Module - Works with Raspberry Pi 3 B+

Brand: Adafruit
Power over Ethernet (PoE) can make your project wiring a breeze - instead of needing a wire for power and data, you can use one Ethernet cable for both! All you...
$16.20 AUD, inc GST

5V 1.8A Isolated Output PoE Module Works with Raspberry Pi 3 B+

Brand: Adafruit
Power over Ethernet (PoE) can make your project wiring a breeze - instead of needing a wire for power and data, you can use one Ethernet cable for both! All you...
$28.40 AUD, inc GST

PoE+ HAT Push-Fit Extra Tall Header Kit

Brand: The Pi Hut
The latest PoE+ HAT from Raspberry Pi has a different PCB to the original PoE HAT which no longer allows stacking 4-pin headers to be used. This has made...
$7.30 AUD, inc GST

WIZnet Pico 2 Board with Ethernet & USB-C

Brand: The Pi Hut
Explore the WIZnet Pico 2 Board, featuring Raspberry Pi RP2350 dual-core microcontroller, integrated Ethernet via W6100 TCP/IP controller, and USB-C connectivity - perfect for IoT and networking projects.
$26.35 AUD, inc GST

WIZnet W5500 Pico Board - Ethernet & PoE Ready

Brand: The Pi Hut
Explore the WIZnet W5500 Pico board, featuring RP2040 microcontroller, built-in Ethernet, and PoE capability - perfect for IoT projects requiring network connectivity with the simplicity of Raspberry Pi Pico compatibility.
$25.95 AUD, inc GST

Adafruit Ethernet FeatherWing

Brand: Adafruit Feather
Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet...
$39.80 AUD, inc GST

Arduino Ethernet Shield 2

Brand: Arduino
The Arduino Ethernet Shield 2 connects your Arduino board to the internet.
$51.15 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.