Search results for: 'nema 23 stepper motor mount'
Learn
Steel L-Bracket for NEMA 23 Stepper Motors
Brand: Pololu
This coated steel bracket lets you securely mount typical NEMA 23-size stepper motors to your project. The bracket features two slots for various mounting...
$38.50 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 23)
Brand: goBilda
The NEMA 23 motor mount provides a clean and simple way to fasten a NEMA 23 stepper motor to your project. The mount has both threaded and.....
$16.70 AUD, inc GST
Pololu Universal Aluminum Mounting Hub for 1/4″ Shaft, #4-40 Holes (2-Pack)
Brand: Pololu
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch diameter motor shafts. The set includes two hubs, four #4-40 set screws for securing the hubs to motor shafts, and one 0.05″ Allen wrench for use with the set screws. Each hub has four threaded mounting holes for #4-40 screws (not included).
$22.30 AUD, inc GST
Pololu Universal Aluminum Mounting Hub for 1/4″ Shaft, M3 Holes (2-Pack)
Brand: Pololu
These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 1/4 inch diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws. Each hub has four threaded mounting holes for M3 screws (not included).
$22.40 AUD, inc GST
1702 Series Quad Block Motor Mount (32-1)
Brand: goBilda
Get compatibility and versatility all in one motor mount. The Quad Block Motor Mount contains many different hole patterns in order to work.....
$13.50 AUD, inc GST
1702 Series Quad Block Motor Mount (32-2)
Brand: goBilda
This motor mount is a solid way to fasten a Neverest Orbital 20 or a REV HD Hex Planetary Gear Motor to goBILDA. The included M3 x 10mm.....
$13.50 AUD, inc GST
Similar matches
A4988 Stepper Motor Driver Carrier (Header Pins Soldered)
Brand: Pololu
This version of Pololu's A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
$16.15 AUD, inc GST
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
$11.40 AUD, inc GST
A4988 Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.
$13.90 AUD, inc GST
DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)
Brand: Pololu
This version of Pololu's DRV8825 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8825 Stepper Motor Driver Carrier product page for more information about the driver.
$28.45 AUD, inc GST
Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size
Brand: Adafruit
This tiny stepper motor is the same quality and step-size as the big NEMA-17's Adafruit stock, but so cute so it will work with compact CNC builds. This 4-wire bipolar...
$43.35 AUD, inc GST
A4988 Stepper Motor Driver Carrier, Black Edition (Header Pins Soldered)
Brand: Pololu
This version of Pololu's Black Edition A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
$17.75 AUD, inc GST
Bipolar Stepper Motor with Planet Gear Box (18kg.cm)
Brand: DFRobot
This is a bipolar stepper motor with a planetary gearbox (gear ratio: 5.18) and uses a standard 8mm-diameter D type output shaft, with a 1.8° step angle (200 steps/revolution).
$65.93 AUD, inc GST
Small Size and High Torque Stepper Motor - 24BYJ48 (Seeed Studio)
Brand: Seeed Studio
Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Automatic curtains etc. Specification: •Phase: 4 •Step...
$11.95 AUD, inc GST
TB67S581FNG Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for Toshiba’s TB67S581FNG microstepping bipolar stepper motor driver features adjustable current limiting, over-current and...
$11.70 AUD, inc GST
Motor Mount for TT Gearbox DC Motors - L-Bracket Type
Brand: Adafruit
You have a TT motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have an L-Bracket DC Motor Mount just like this fine one here! Made...
$3.60 AUD, inc GST
DC Motor Plastic Mount - 130 Size / 20mm Diameter
Brand: Adafruit
We couldn't let the DC Gearbox "TT" motors have all the fun! If you're using some sort of motor, there's a really good chance it's a low cost DC Motor in "130 Size"...
$1.60 AUD, inc GST
Stepper Motor - 29 oz.in (200 steps/rev, Threaded Shaft)
Brand: Sparkfun
These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important.
$96.80 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 4.5V, 2 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 4.5 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 7.4V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 7.4 V, allowing for a holding torque of 9 kg-cm (125 oz-in).
$214.95 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×41mm, 5.7V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 5.7 V, allowing for a holding torque of 4 kg-cm (55 oz-in).
$139.95 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 57×56mm, 2.5V, 2.8 A/Phase
Brand: Pololu
This NEMA 23-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2.8 A at 2.5 V, allowing for a holding torque of 13 kg-cm (180 oz-in).
$239.95 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×76mm, 8.6V, 1 A/Phase
Brand: Pololu
This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 8.6 V, allowing for a holding torque of 14 kg-cm (190 oz-in).
$289.95 AUD, inc GST
Stepper Motor Mount with Hardware - NEMA-17 Sized
Brand: Adafruit
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...
$23.25 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 14)
Brand: goBilda
This mount allows you to fasten a NEMA 14 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$13.45 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 11)
Brand: goBilda
The NEMA 11 stepper motor mount is able to fasten to the face of a NEMA 11 motor using the supplied pan head screws. The screws are...
$11.80 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 8)
Brand: goBilda
This mount will fasten to the face of a NEMA 8 stepper motor using the supplied pan head screws. The threaded holes are on the 16mm...
$10.10 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 17)
Brand: goBilda
This mount allows you to fasten a NEMA 17 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$15.15 AUD, inc GST
Pololu Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracket features several slots and...
$10.05 AUD, inc GST
AMIS-30543 Stepper Motor Driver Carrier
Brand: Pololu
This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11...
$40.20 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Fixed 500mA@5V / [email protected] (Soldered Header Pins)
Brand: Pololu
This version is item #5350 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.40 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Fixed 750mA@5V / [email protected] (Soldered Header Pins)
Brand: Pololu
This version is item #5348 with soldered header pins, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. It...
$10.40 AUD, inc GST
DRV8434A Stepper Motor Driver Carrier (Header Pins Soldered)
Brand: Pololu
This version of our DRV8434A Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate...
$24.70 AUD, inc GST
TB67S279FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
Brand: Pololu
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$21.40 AUD, inc GST
Stepper Motor with Cable
Brand: Sparkfun
This is a simple, but very powerful stepper motor with a 4-wire cable attached.
$60.50 AUD, inc GST
TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered)
Brand: Pololu
This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an...
$25.10 AUD, inc GST
DRV8434A Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for TI’s DRV8434A microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 4.5 V to 48 V....
$23.05 AUD, inc GST
STSPIN220 Low-Voltage Stepper Motor Driver Carrier (Header Pins Soldered)
Brand: Pololu
This version of our STSPIN220 Low-Voltage Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with...
$20.05 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Adjustable Current
Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$9.30 AUD, inc GST
TB67S128FTG Stepper Motor Driver Carrier
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67S128FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and...
$28.45 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.