Search results for: 'nema 17 stepper motor'
Stepper motor - NEMA-17 size - 200 steps/rev, 12V 350mA
Brand: Adafruit
A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified...
$37.40 AUD, inc GST
Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$69.40 AUD, inc GST
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Brand: Pololu
This NEMA 17-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.2 A at 4 V, allowing for a holding torque of 3.2 kg-cm (44 oz-in).
$97.65 AUD, inc GST
Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$184.95 AUD, inc GST
Stepper Motor Mount with Hardware - NEMA-17 Sized
Brand: Adafruit
You have a stepper motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have a stepper motor mount just like this fine one one here!...
$23.25 AUD, inc GST
1700 Series Face Tapped Stepper Motor Mount (NEMA 17)
Brand: goBilda
This mount allows you to fasten a NEMA 17 motor to any goBILDA component that contains the 16mm pattern. The included M3 socket head screws.....
$15.15 AUD, inc GST
SparkFun Mini Stepper Motor Driver - TC78H670FTG
Brand: Sparkfun
The SparkFun Mini Stepper Motor Driver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba!...
$21.60 AUD, inc GST
Similar matches
TB6600 Stepper Motor Driver
Brand: DFRobot
Stepper motor is a brushless DC electric motor that divides a full rotation into a number of equal steps The motor's position can then be commanded to move and hold at one of these steps.
$33.50 AUD, inc GST
Mini Stepper Motor - 200 Steps - 20x30mm NEMA-8 Size
Brand: Adafruit
This tiny stepper motor is the same quality and step-size as the big NEMA-17's Adafruit stock, but so cute so it will work with compact CNC builds. This 4-wire bipolar...
$43.35 AUD, inc GST
Small Size and High Torque Stepper Motor - 24BYJ48 (Seeed Studio)
Brand: Seeed Studio
Small size and high torque, Mainly used in air conditioner louver, small cooling heating fan and Automatic curtains etc. Specification: •Phase: 4 •Step...
$11.95 AUD, inc GST
Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15") threaded rod as its output shaft, turning it into a linear actuator capable...
$249.95 AUD, inc GST
Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Brand: Pololu
This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning. The included traveling nut has four mounting holes and moves 40 µm (1.6 mil) per full step; finer resolution can be achieved with microstepping. The stepper motor has a 1.8° step angle (200 steps/revolution) and each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in).
$259.95 AUD, inc GST
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase
Brand: Pololu
This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). It offers a holding torque of 1.9 kg-cm (26 oz-in), and each phase draws 1 A at 5.4 V. This stepper motor’s flat profile (25.6 mm including the shaft) allows it to be used in places where more traditional stepper motors would be too bulky.
$159.95 AUD, inc GST
A4988 Stepper Motor Driver Carrier
Brand: Pololu
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.
$13.90 AUD, inc GST
Pololu Stamped Aluminum L-Bracket for NEMA 17 Stepper Motors
Brand: Pololu
This black anodized aluminum bracket lets you securely mount typical NEMA 17-size stepper motors to your project. The bracket features several slots and holes for a wide variety of mounting solutions, and four M3×6mm screws are included for securing the motor to the bracket.
$11.40 AUD, inc GST
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×31.5mm, 5.4V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$464.95 AUD, inc GST
Sanyo Pancake Stepper Motor with Encoder: Bipolar, 200 Steps/Rev, 42×24.5mm, 3.5V, 1 A/Phase, 4000 CPR
Brand: Pololu
This NEMA 17-size pancake bipolar stepping motor from Sanyo features an integrated high-resolution (1000 P/R) quadrature encoder that allows for 4000...
$454.95 AUD, inc GST
A5984 Stepper Motor Driver Carrier, Adjustable Current
Brand: Pololu
This is a carrier board for Allegro’s A5984 microstepping bipolar stepper motor driver. It offers eight different microstep resolutions (down to...
$9.30 AUD, inc GST
MP6500 Stepper Motor Driver Carrier, Digital Current Control
Brand: Pololu
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow. This version of the board allows for dynamic current limit control through a pair of digital inputs, and the board ships with 0.1″ male header pins included but not soldered in.
$16.70 AUD, inc GST
MP6500 Stepper Motor Driver Carrier, Digital Current Control (Header Pins Soldered)
Brand: Pololu
This version of our MP6500 Stepper Motor Driver Carrier with Digital Current Control ships with male header pins installed, so no soldering is required to...
$18.40 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.