Search results for: 'dual motor driver carrier'
Learn
Makerverse Motor Driver 2 Channel | Quickstart Guide with Raspberry Pi Pico
How to use Adafruit DC & Stepper Motor HAT - Controlling DC and Stepper Motors With A Raspberry Pi
Motor Drivers vs. Motor Controllers
Servos, Steppers or Solenoids? | Choosing an Actuator to Move Your Project
Zero to Maker Workshop | Motors, Output Devices and Microcontroller
TB6612FNG Dual Motor Driver Carrier
Brand: Pololu
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.
$8.25 AUD, inc GST
DRV8833 Dual Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.
$18.30 AUD, inc GST
Dual Channel Motor Driver
Brand: Core Electronics
Control motors and make your projects move with is great value motor controller!
$1.80 AUD, inc GST
2x7A DC Motor Driver
Brand: DFRobot
This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.
$33.10 AUD, inc GST
2x1.2A DC Motor Driver (TB6612FNG)
Brand: DFRobot
This DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins...
$7.70 AUD, inc GST
DRV8835 Dual Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$11.70 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$26.40 AUD, inc GST
2A Dual Motor Controller
Brand: DFRobot
This is 4.8-46V, 2A Dual Motor Controller is the revised version of the DF-MDV1.0. Drive current up to 2A per motor output.
$21.45 AUD, inc GST
Dual H-Bridge Motor Driver for DC or Steppers - 600mA - L293D
Brand: Adafruit
Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers...
$16.85 AUD, inc GST
Dual/Single Motor Driver Carrier TB67H420FTG
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. It has a wide operating voltage range of 10 V to 47 V and can deliver a continuous 1.7 A to each motor channel, or 3.4 A in single-channel mode. A configurable current chopping threshold allows the TB67H420 to actively limit the motor current, and it features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).
$21.40 AUD, inc GST
Dual TB9051FTG Motor Driver Shield for Arduino
Brand: Pololu
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual TB9051FTG motor drivers operate from...
$53.50 AUD, inc GST
Full-Bridge Motor Driver Dual - L298N
Brand: Sparkfun
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.
$10.65 AUD, inc GST
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Brand: Pololu
Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
$97.90 AUD, inc GST
Motor Driver and Power Distribution Board for Romi Chassis
Brand: Pololu
Use this motor driver and power distribution board to get your Romi chassis running quickly. It offers all of the same features as the smaller Power...
$58.40 AUD, inc GST
Dual MC33926 Motor Driver Carrier
Brand: Pololu
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$71.25 AUD, inc GST
A4990 Dual Motor Driver Carrier
Brand: Pololu
This compact breakout board makes it easy to use Allegro’s A4990 dual motor driver, which can control two bidirectional DC motors over a wide operating voltage range of 6 V to 32 V. It is capable of delivering a continuous 0.7 A to each motor channel, and onboard sense resistors enable the A4990 to limit the peak motor current to about 0.9 A per channel. The driver also features protection against reverse-voltage, under-voltage, over-voltage, over-current, and over-temperature.
$23.40 AUD, inc GST
2x3A DC Motor Driver Carrier Board for UNIHIKER
Brand: DFRobot
The UNIHIKER Carrier Board featuring a dual DC motor drive, RGB lights, infrared transmission and reception, and multiple power supply options (USB, DC...
$24.50 AUD, inc GST
Dual MAX14870 Motor Driver Shield for Arduino
Brand: Pololu
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated...
$50.10 AUD, inc GST
L298 Dual H-Bridge Motor Driver (Seeed Studio)
Brand: Seeed Studio
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a...
$45.85 AUD, inc GST
Pololu DRV8835 Dual Motor Driver Shield for Arduino
Brand: Pololu
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The shield can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.
$20.10 AUD, inc GST
Pololu Dual MC33926 Motor Driver Shield for Arduino
Brand: Pololu
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor. These great drivers also offer current-sense feedback and accept ultrasonic PWM frequencies for quieter operation. The Arduino pin mappings can all be customized if the defaults are not convenient, and the motor driver control lines are broken out along the left side of the shield for general-purpose use without an Arduino.
$81.70 AUD, inc GST
Motoron M2U256 Dual Serial Motor Controller (Header Pins Soldered)
Brand: Pololu
The Motoron M2U256 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron...
$41.65 AUD, inc GST
Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino (Connectors Soldered)
Brand: Pololu
The Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or...
$149.95 AUD, inc GST
Motoron M2U256 Dual Serial Motor Controller
Brand: Pololu
The Motoron M2U256 Dual I²C Motor Controller offers a compact solution for controlling two DC motors using a UART serial interface. Multiple Motoron...
$38.90 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (1A)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$27.65 AUD, inc GST
Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino (Connectors Soldered)
Brand: Pololu
The Motoron M2S18v18 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or...
$119.95 AUD, inc GST
Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino (No Connectors)
Brand: Pololu
The Motoron M2S24v16 Dual High-Power Motor Controller Shield for Arduino makes it easy to control two high-power DC motors from an Arduino or...
$129.95 AUD, inc GST
Arduino Nano Motor Carrier
Brand: Arduino
Nano Motor Carrier provides a quick and easy way to connect and control motors in your projects.
$139.95 AUD, inc GST
Similar matches
DRV8874 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 2.1 A (6 A...
$20.05 AUD, inc GST
DRV8825 Stepper Motor Driver Carrier, High Current
Brand: Pololu
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of Pololu's A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.
$26.35 AUD, inc GST
DRV8876 Single Brushed DC Motor Driver Carrier
This compact breakout board for TI’s DRV8876 motor driver offers a wide operating voltage range of 4.5 V to 37 and can deliver a continuous 1.3 A (3.5 A...
$13.50 AUD, inc GST
DRV8838 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$8.20 AUD, inc GST
DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)
Brand: Pololu
This version of Pololu's DRV8825 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the DRV8825 Stepper Motor Driver Carrier product page for more information about the driver.
$28.45 AUD, inc GST
A4988 Stepper Motor Driver Carrier (Header Pins Soldered)
Brand: Pololu
This version of Pololu's A4988 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard.
$16.15 AUD, inc GST
MP6550 Single Brushed DC Motor Driver Carrier
Brand: Pololu
This tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A...
$9.85 AUD, inc GST
TB9051FTG Single Brushed DC Motor Driver Carrier
Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB9051FTG brushed DC motor driver. It has a wide operating voltage range of 4.5 V to 28 V and can...
$21.75 AUD, inc GST
DRV8834 Low-Voltage Stepper Motor Driver Carrier
Brand: Pololu
This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of Pololu's A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The DRV8834 operates from 2.5–10.8 V, allowing stepper motors to be powered with voltages that are too low for other drivers, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). It features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/32-step). This board ships with 0.1″ male header pins included but not soldered in.
$16.65 AUD, inc GST
MC33926 Motor Driver Carrier
Brand: Pololu
This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$38.05 AUD, inc GST
DRV8256E Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for TI’s DRV8256E motor driver offers a wide operating voltage range of 4.5 V to 48 V and can deliver a continuous 1.9 A...
$23.70 AUD, inc GST
BD65496MUV Single Brushed DC Motor Driver Carrier
Brand: Pololu
This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A...
$25.10 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.