Search results for: 'uninterruptible power supply hat'

The PoE HAT (G) is an IEEE 802.3af/at-compliant PoE (Power Over Ethernet) HAT for Raspberry Pi 5. By using with a PoE router or switch that supports the IEEE 802.3af/at network standard, it is possible to provide both network connection and power supply for your Raspberry Pi in only one Ethernet cable.

Power Over Ethernet HAT (F) For Raspberry Pi 5, High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard...

Keep your power bank from auto-shutting off with this pre-assembled USB KeepAlive adapter, designed to maintain power delivery for low-current devices like microcontrollers, Raspberry Pi Pico, and other USB-powered projects.

Most power banks will automatically turn off their USB ports when the power/current being drawn is lower than a certain value. This makes it impossible to...

Discover the WIZnet WIZPoE-P1 module, an IEEE802.3af compliant Power over Ethernet solution delivering up to 7W of power to Raspberry Pi Pico and compatible WIZnet boards through standard Ethernet cables.

Power Over Ethernet HAT (Type D) For Raspberry Pi 3B+/4B, 802.3af-Compliant, Tailored For Raspberry Pi Official Case.

This module consists of two ideal diode circuits with their outputs connected to form a power ORing arrangement, which can be used for load sharing or for...

Keep your power bank running with ultra-low power devices using the compact USB-C KeepAlive module, featuring automatic pulse technology to prevent automatic shutoff when powering microcontrollers, Raspberry Pi Picos, or other small electronics.

Power USB-C devices from two USB-C power sources! Where does power go? Power from each USB-C input (A/B) connector goes via a MOSFET "Ideal Diode" to the...

Power over Ethernet HAT (E) for Raspberry Pi 3B+/4B, 802.3af-compliant...

The Power + Relay HAT for Pi Zero is designed as an all-in-one simple automation add on for the Raspberry Pi Zero. It combines the beefy 5V 3A power...

This is a simple 48W (8V DC, 6A) power supply, designed for use with the Raspberry Pi Build HAT...

4-channel current, voltage and power monitoring HAT for Raspberry Pi with I2C interface and 0–26V range.

The Powershield Defender AVR 1600VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PC's and point of sale systems. In the event of a power outage the UPS will allow continued operation of the PC so that work can be saved and the system can be shutdown safely. Generally, computers need to be shutdown in a specified manner to avoid damaging the software/data that is being used. By using a UPS and the included software a computer can be automatically shutdown safely in the event of a power outage. Backup time up to 40 minutes depending on connected load. Compact design is ideal for under desk operation. Features Line interactive smart AVR Three Australian outlets Full time power surge / spike protection USB communications with sophisticated PowerShield NetGuard software Modern, stylish steel enclosure Ultra reliable

The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches. The main function is pushbutton-based...

The Powershield SafeGuard 750VA Uninterruptible Power Supply (UPS) is designed for a home/office solution. It includes three battery backup and surge protected Australian sockets, three dedicated Australian outlets with surge protection and RJ45 phone line surge protection. Provides modified sinewave output and has an audible alarm when activated. Includes management software to suit most operating systems. Features Automatic Voltage Regulation (Buck and Boost) Light-weight compact and elegantly designed Intelligent microprocessor control Monitoring and shutdown software included Fax/modem/LAN surge suppression port Overload protection and alarm Output short circuit protection Start on battery function (cold start) USB communication Easy user replacable battery Australian/New Zealand approved sockets

This compact plugpack style 12V DC NBN UPS (uninterruptible power supply) is fitted with an internal lithium-ion battery pack for keeping devices powered up during a power outage

This power distribution board is designed specifically for the Romi chassis as a convenient way to access the chassis’s battery power and pass that on the...

Build your own USB KeepAlive circuit to prevent power banks from auto-shutting off when powering low-current devices like Raspberry Pi Pico or microcontrollers with this DIY soldering kit featuring a 555 timer design.

The Powershield Commander 1000VA Uninterruptible Power Supply (UPS) is designed to support multiple computers and peripherals, networked PCs and point of sale systems. Simple to install and operate. Supplied with monitoring and shutdown software.

Most project of Arduino may need more than two voltage supply. When feed with from 4.5-35V, this power shield able to provide a voltage range from 1.25-12V with 3A peak current.