Search results for: 'programmable logic controller'

8-bit Atmel AVR Microcontroller - MCU 32KB In-system Flash 20MHz 1.8V-5.5V

Waveshare RP2350-Zero Mini Development Board, Raspberry Pi Microcontroller Development Board, Based On Raspberry Pi Dual-core & Dual-architecture...

The Roboclaw 2x30A motor controller by Ion Motion Control can supply two brushed DC motors with 30 Amps continuous and up to 60 Amps.....

The Roboclaw 2x15A motor controller by Ion Motion Control can supply two brushed DC Motors with 15 Amps continuous and...

8-bit Microcontroller - MCU 8kB Flash 512B EEPROM 12 I/O Pins.

This affordable, ready-assembled robotics controller board is ready to accept your BBC Micro:Bit, battery power (6 to 10V) and motors of your choice to make your own DIY robot. Use a small box, ice-cream carton or similar to house everything and you can build a really affordable robot for your school, coding club or home.

This discrete MOSFET brushless motor controller is based on Allegro’s A89301 BLDC driver and enables sensorless control of one brushless DC motor. It...

The VClamp allows RoboClaw and MCP motor controllers to be used with switching power supplies by dissipating excess regenerative energy through a...

Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement,...

The RoboClaw 2x7A is an intelligent motor controller designed to control two brushed DC motors at 7.5 Amps continuous with up to 15 Amps.....

Join the digital revolution & get up to speed with Logic Gates & truth tables with our Digital Logic pack add-on for the Kitronik Inventor's kit for micro:bit.

8-bit Microcontroller - MCU 16kB Flash 0.5kB EEPROM 23 I/O Pins.

This is the Hummingbird BIT Controller Board only and does not include the required BBC micro:bit.

The Romi 32U4 Control Board turns the Romi chassis into a programmable robot based on the Arduino-compatible ATmega32U4 MCU. Its features include...

This is the control board for the 3pi+ 2040 robot, and it is included as part of the Standard Edition, Turtle Edition, and Hyper Edition 3pi+ 2040 kits...

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Small but powerful home or class electronics laboratory. All-in-one breadboarding and testing unit. Includes a variety of measuring instruments, ready to...

This is the control board for the 3pi+ 32U4 robot, and it is included as part of the Standard Edition, Turtle Edition, and Hyper Edition 3pi+ 32U4 kits ...

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V to 11 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

This is the main control board for the Zumo 32U4 OLED robot. It is included as part of the Zumo 32U4 OLED Robot Kit and built into the assembled versions...

Introducing MOTION 2350 Pro, designed by Cytron, leveraging the new RP2350 processor. It has been a few years since the RP2040 was launched. Now,...

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

The 24-channel Mini Maestro 24 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver. Header pins are included but not soldered into this partial kit version (all surface-mount components are soldered).

The Servo PWM Pi is a 16-channel, 12-bit PWM controller for the Raspberry Pi, suitable for driving LEDs and radio control servos. The board is based around PCA9685 PWM I2C LED controller IC from NXT and can drive each of the 16 outputs with 12 bit (4096 steps) duty cycle from 0% to 100%.

The SparkFun MicroMod Alorium Sno Processor features the Sno System on Module (SoM) adapted to the MicroMod M.2 processor form factor...

At the heart of the Experiential Robotics Platform (XRP) lies the powerful yet easy-to-use XRP Controller Board, the brains of the XRP...

This discrete MOSFET stepper motor driver enables control of one bipolar stepper motor. It supports a wide 8 V to 50 V operating voltage range and can...

The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...

This is the control board for the 3pi+ 32U4 OLED robot, and it is included as part of the Standard Edition, Turtle Edition, and Hyper Edition 3pi+ 32U4...