Search results for: 'motor drivers'

50 results

Makerverse Motor Driver 2 Channel

Brand: Makerverse
Drive 2x Brushed DC motors or a bipolar stepper with optional current limiting
$6.60 AUD, inc GST

TB6612FNG Dual Motor Driver Carrier

Brand: Pololu
This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 V to 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.
$8.25 AUD, inc GST

2x7A DC Motor Driver

Brand: DFRobot
This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.
$33.23 AUD, inc GST

Dual Channel Motor Driver

Brand: Core Electronics

Control motors and make your projects move with is great value motor controller!

$1.80 AUD, inc GST

DRV8833 Dual Motor Driver Carrier

Brand: Pololu
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.
$18.30 AUD, inc GST

2x1.2A DC Motor Driver (TB6612FNG)

Brand: DFRobot
This DFRobot micro dual way DC motor driver is design based on TB6612FNG motor driver IC. It inherits DFRobot L298N motor control logic, which only need four pins...
$7.43 AUD, inc GST

DRV8874 Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 2.1 A (6 A...
$20.05 AUD, inc GST

SimpleFOCmini Brushless DC Motor Driver Board

Brand: DFRobot
Get precise, low-speed FOC control for your BLDC motor. The SimpleFOCmini driver enables closed-loop position, speed, and torque control. Compatible with...
$10.51 AUD, inc GST

SparkFun Motor Driver - Dual TB6612FNG (with Headers)

Brand: SparkFun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$26.40 AUD, inc GST

VNH5019 Motor Driver Breakout

Brand: Pololu
This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). Along with built-in protection against reverse-voltage, over-voltage, under-voltage, over-temperature, and over-current, these features make this product a great general-purpose motor driver.
$49.30 AUD, inc GST

15A Single DC Motor Driver

Brand: DFRobot
This is an ultra small size DC motor driver for room limited projects, while the impressive IC - LM2575 could provide a powerful way to drive 36V@15A motors. Also its UVLO (Under Voltage Latch-Out) feature provides a safe guard for your system. Besides all, it is very considerate to own an 5V output for Arduino or any other devices, and its interface is ESD (electro-static discharge) protection.
$31.80 AUD, inc GST

Quad DC Motor Driver Shield for Arduino

Brand: DFRobot
The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports PWM speed control and polarity control. The driver shield includes two TB6612FNG motor driver chips, compared with the traditional L298N chip, efficiency is improved and the component size also greatly reduced. The chip doesn't heat in to the rated range, and a single path maximum output 1.2A continuous current. The module includes a built-in low voltage detection circuit and thermal shutdown protection circuit, which is safe and reliable. This module is suitable for all kinds of DIY production.
$23.58 AUD, inc GST

DRV8838 Single Brushed DC Motor Driver Carrier

Brand: Pololu
This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering a small, low-voltage motor. The carrier board has the form factor of a 10-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$8.20 AUD, inc GST

DRV8835 Dual Motor Driver Carrier

Brand: Pololu
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$11.70 AUD, inc GST

DRV8876 Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for TI’s DRV8876 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 1.3 A (3.5 A...
$13.50 AUD, inc GST

MP6550 Single Brushed DC Motor Driver Carrier

Brand: Pololu
This tiny breakout board for the MPS MP6550 motor driver offers a wide operating voltage range of 1.8 V to 22 V and can deliver a continuous 1.7 A (2.5 A...
$9.85 AUD, inc GST

Pololu G2 High-Power Motor Driver 18v17

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3" × 0.8" board supports a wide...
$74.75 AUD, inc GST

RoboClaw 2x15A Motor Controller

Brand: goBILDA
The Roboclaw 2x15A motor controller by Ion Motion Control can supply two brushed DC Motors with 15 Amps continuous and...
$179.95 AUD, inc GST

L9110H H-Bridge Motor Driver for DC Motors - 8 DIP - 2.5V-12V 800mAh

Brand: Adafruit
Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's...
$2.95 AUD, inc GST

Pololu G2 High-Power Motor Driver 24v13

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$74.80 AUD, inc GST

SparkFun Brushless Motor Driver - 3-Phase (TMC6300)

Brand: SparkFun
The TMC6300 from Trinamic is a powerful, yet easy to use three-phase brushless DC (BLDC) motor driver...
$29.75 AUD, inc GST

Kitronik Motor Driver Board for Raspberry Pi Pico

Brand: Kitronik
Make the Raspberry Pi Pico the core of your new buggy project with the Kitronik Compact Motor Driver Board for Raspberry Pi Pico.
$19.95 AUD, inc GST

L298 Dual H-Bridge Motor Driver (Seeed Studio)

Brand: Seeed Studio
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a...
$45.85 AUD, inc GST

RoboClaw 2x30A Motor Controller

Brand: goBILDA
The Roboclaw 2x30A motor controller by Ion Motion Control can supply two brushed DC motors with 30 Amps continuous and up to 60 Amps.....
$239.95 AUD, inc GST

RoboClaw 2x7A Motor Controller

Brand: goBILDA
The RoboClaw 2x7A is an intelligent motor controller designed to control two brushed DC motors at 7.5 Amps continuous with up to 15 Amps.....
$144.95 AUD, inc GST

RoboClaw 2x60A Motor Controller (V8)

Brand: Pololu
The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...
$404.95 AUD, inc GST

Grove - I2C Motor Driver (TB6612FNG)

Brand: Seeed Studio

Minimise wiring and save valuable microcontroller pins with the Grove I2C Motor Driver. Built around the TB6612FNG IC, it drives two DC motors or one stepper motor at up to 1.2A continuous current per channel.

$22.50 AUD, inc GST

Kitronik Compact Motor Driver Board for the BBC micro:bit

Brand: Kitronik
Add motor driving capability to the microbit with the Kitronik compact motor driver board for the BBC micro:bit. This motor driver board allows two motors to be driven simultaneously with forward, reverse & stop control, making it ideal for designs such as buggies. The board has built-in short circuit, over current and thermal protection.
$23.95 AUD, inc GST

Pololu G2 High-Power Motor Driver 24v21

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. Additional features of this second-generation (G2) driver include reverse-voltage protection along with basic current sensing and current limiting functionality.
$94.60 AUD, inc GST

EasyDriver - Stepper Motor Driver

Brand: SparkFun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST

DC Motor Driver HAT(V1.0)

Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.70 AUD, inc GST

Grove - I2C Motor Driver (L298P) (Seeed Studio)

Brand: Seeed Studio
Grove - I2C Motor Driver(L298P) is a common-use motor driver for stepping motor and servo motor. It embeds an STM32 chip for burning the code to control the motor driver.
$32.40 AUD, inc GST

Kitronik Klip Motor Driver for BBC micro:bit

Brand: Kitronik
The Klip Motor Driver for BBC microbit allows you do more than just drive motors. It breaks out pins 0, 1, 2, 3V & GND from the microbit & connects to ZIP LEDS.
$29.50 AUD, inc GST

Pololu High-Power Motor Driver 36v20 CS

Brand: Pololu
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The compact 1.8×1.2-inch board supports a wide 5.5 to 50 V voltage range and is efficient enough to deliver a continuous 20 A without a heat sink. This version outputs an analog voltage proportional to the motor current, and an extra control input allows for coasting in addition to the driving and braking offered by the other Pololu high-power motor drivers.
$209.95 AUD, inc GST

SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)

Brand: SparkFun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less...
$38.70 AUD, inc GST

TB67H453FNG Single Brushed DC Motor Driver Carrier

Brand: Pololu
This compact breakout board for Toshiba’s TB67H453FNG motor driver offers a wide operating voltage range of 4.5 V to 44 V and can deliver a continuous...
$8.25 AUD, inc GST

Dual/Single Motor Driver Carrier TB67H420FTG

Brand: Pololu
This breakout board makes it easy to use Toshiba’s TB67H420FTG brushed DC motor driver, which can operate in either dual-channel mode for independent bidirectional control of two motors or single-channel mode for driving one motor with increased current. It has a wide operating voltage range of 10 V to 47 V and can deliver a continuous 1.7 A to each motor channel, or 3.4 A in single-channel mode. A configurable current chopping threshold allows the TB67H420 to actively limit the motor current, and it features built-in protection against under-voltage, over-current, and over-temperature conditions; our carrier board also adds reverse-voltage protection (up to 40 V).
$21.40 AUD, inc GST

1x30A Motor Commander

Brand: goBILDA
Sometimes you just want to dial in the speed! The 1x30A Motor Commander takes complexity out of the equation, leaving you.....
$114.95 AUD, inc GST

RoboClaw 2x7A Motor Controller (V6B)

Brand: Pololu
The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...
$149.95 AUD, inc GST

RoboClaw 2x200A, 60VDC Motor Controller

Brand: Pololu
The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...
$1129.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.