Search results for: '3a motor driver'
3A 4V-16V 2 Channel DC Motor Driver
Brand: The Pi Hut
Looking for a motor driver for your robot? Want to drive a stepper motor? Worry not! This smart motor driver from Cytron is able to control two brushed DC...
$19.35 AUD, inc GST
DRV8835 Dual Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
$11.70 AUD, inc GST
PPM 2x3A DC Motor Driver
Brand: DFRobot
This motor driver module is a special PPM signal motor controller for Aero modelling remote control. It is designed by DFRobot and it can be controlled by RC transmitter...
$24.87 AUD, inc GST
MC33926 Motor Driver Carrier
Brand: Pololu
This breakout board for Freescale’s MC33926 full H-bridge has an operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to a DC motor. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$38.05 AUD, inc GST
Dual MC33926 Motor Driver Carrier
Brand: Pololu
This dual brushed DC motor driver, based on Freescale’s MC33926 full H-bridge, has a wide operating range of 5 – 28 V and can deliver almost 3 A continuously (5 A peak) to each of its two motor channels. The MC33926 works with 3 – 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current feedback, under-voltage protection, over-current protection, and over-temperature protection.
$71.25 AUD, inc GST
Dual Channel Motor Driver
Brand: Core Electronics
Control motors and make your projects move with is great value motor controller!
$1.80 AUD, inc GST
Full-Bridge Motor Driver Dual - L298N
Brand: Sparkfun
The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors.
$10.65 AUD, inc GST
Similar matches
Makerverse Motor Driver 2 Channel
Brand: Makerverse
Drive 2x Brushed DC motors or a bipolar stepper with optional current limiting
$6.60 AUD, inc GST
2x7A DC Motor Driver
Brand: DFRobot
This is an ultra small Dual DC motor driver for some room limited projects. UVLO (Under Voltage Latch-Out) features a safe guard for your system. It is very considerate to own an Photo Coupler isolation for all the signals in case of that the motor's Reverse Current would interfere the control signals. Besides all, all the interfaces includes ESD (electro-static discharge) protection.
$33.23 AUD, inc GST
DRV8833 Dual Motor Driver Carrier
Brand: Pololu
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.
$18.30 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (with Headers)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$26.40 AUD, inc GST
15A Single DC Motor Driver
Brand: DFRobot
This is an ultra small size DC motor driver for room limited projects, while the impressive IC - LM2575 could provide a powerful way to drive 36V@15A motors. Also its UVLO (Under Voltage Latch-Out) feature provides a safe guard for your system. Besides all, it is very considerate to own an 5V output for Arduino or any other devices, and its interface is ESD (electro-static discharge) protection.
$31.80 AUD, inc GST
RoboClaw 2x15A Motor Controller
Brand: goBilda
The Roboclaw 2x15A motor controller by Ion Motion Control can supply two brushed DC Motors with 15 Amps continuous and...
$179.95 AUD, inc GST
2A Dual Motor Controller
Brand: DFRobot
This is 4.8-46V, 2A Dual Motor Controller is the revised version of the DF-MDV1.0. Drive current up to 2A per motor output.
$21.23 AUD, inc GST
RoboClaw 2x30A Motor Controller
Brand: goBilda
The Roboclaw 2x30A motor controller by Ion Motion Control can supply two brushed DC motors with 30 Amps continuous and up to 60 Amps.....
$239.95 AUD, inc GST
1x20A Motor Controller (9-30V Input)
Brand: goBilda
This motor speed controller is a compact, easy way to control the speed and direction of a brushed DC motor! Just plug in.....
$79.45 AUD, inc GST
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
Brand: Sparkfun
The TMC6300 from Trinamic is a powerful, yet easy to use three-phase brushless DC (BLDC) motor driver...
$29.75 AUD, inc GST
Grove - I2C Motor Driver (TB6612FNG)
Brand: Seeed Studio
Minimise wiring and save valuable microcontroller pins with the Grove I2C Motor Driver. Built around the TB6612FNG IC, it drives two DC motors or one stepper motor at up to 1.2A continuous current per channel.
$22.50 AUD, inc GST
Big Easy Driver
Brand: Sparkfun
The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to a max 2A/phase. It is based on the Allegro A4988 stepper driver chip. It’s the next version of the popular Easy Driver board.
$35.60 AUD, inc GST
1x30A Motor Commander
Brand: goBilda
Sometimes you just want to dial in the speed! The 1x30A Motor Commander takes complexity out of the equation, leaving you.....
$114.95 AUD, inc GST
EasyDriver - Stepper Motor Driver
Brand: Sparkfun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
$30.70 AUD, inc GST
L298 Dual H-Bridge Motor Driver (Seeed Studio)
Brand: Seeed Studio
Double H driver module uses ST L298N dual full-bridge driver, an integrated monolithic circuit in a 15- lead Multiwatt and PowerSO20 packages. It is a...
$45.85 AUD, inc GST
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
Brand: Sparkfun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less...
$38.70 AUD, inc GST
Grove - I2C Motor Driver (L298P) (Seeed Studio)
Brand: Seeed Studio
Grove - I2C Motor Driver(L298P) is a common-use motor driver for stepping motor and servo motor. It embeds an STM32 chip for burning the code to control the motor driver.
$32.40 AUD, inc GST
RoboClaw 2x60A Motor Controller (V8)
Brand: Pololu
The RoboClaw motor controllers from Basicmicro can control a pair of brushed DC motors using USB serial, TTL serial, RC, or analog inputs. Integrated dual...
$404.95 AUD, inc GST
DC Motor Driver HAT(V1.0)
Brand: DFRobot
This is a Raspberry Pi DC motor driver board with on-board encoder interface, which can drive 2-way DC motor and DC motor with encoder. It communicates with Raspberry...
$24.70 AUD, inc GST
H-Bridge Motor Driver 1A
Brand: Sparkfun
Faster, cheaper, smaller, better, right? The SN754410 Quad Half H-Bridge is just that. Capable of driving high voltage motors using TTL 5V logic levels, the SN754410 can drive 4.5V up to 36V at 1A continuous output current! Please see datasheet for more information. This is a pin to pin compatible replacement for the L293D.
$4.20 AUD, inc GST
Thumbnail Sized DC Motor Driver 2x1.5A (HR8833)
Brand: DFRobot
This is a ultra compact size Dual-H-Bridge dc motor driver (Based on HR8833), which could drive two way 1.5A DC brush motors up to 10V . It has the same footprint as your thumbnail suitable for projects with limited spaces.
$7.42 AUD, inc GST
SparkFun Motor Driver - Dual TB6612FNG (1A)
Brand: Sparkfun
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the...
$27.65 AUD, inc GST
SparkFun Qwiic Motor Driver
Brand: Sparkfun
The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them, adding Qwiic ports for plug and...
$39.25 AUD, inc GST
Grove - I2C Motor Driver (Seeed Studio)
Brand: Seeed Studio
Its heart is a dual channel H-bridge driver chip that can handle current up to 2A per channel, controlled by an Atmel ATmega8L which handles the I2C communication...
$38.80 AUD, inc GST
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
Brand: Sparkfun
The SparkFun IoT Brushless Motor Driver is a powerful WiFi & BLE capable motor driver that can control any 3-phase BLDC motor including the one on-board...
$179.95 AUD, inc GST
Pimoroni DRV8830 DC Motor Driver Breakout
Brand: Pimoroni
An H-bridge DC motor driver with configurable current limit (0.2 or 1A) and up to four different I2C addresses. Great for DIY robot builds.
$22.30 AUD, inc GST
SyRen Single 25A DC Motor Driver
Brand: DFRobot
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs...
$151.90 AUD, inc GST
RoboClaw ST 2x45A Motor Controller
Brand: goBilda
The Roboclaw 2x45A motor controller can supply two brushed DC motors with 45 Amps continuous and up to 60 Amps peak. With its multi.....
$314.95 AUD, inc GST
RoboClaw Solo 300A, 60VDC Motor Controller
Brand: Pololu
The RoboClaw Solo motor controllers from Basicmicro (formerly Ion Motion Control) can control a single brushed DC motor using USB serial, TTL serial, RC,...
$834.95 AUD, inc GST
Makers love reviews as much as you do, please follow this link to review the products you have purchased.