Search results for: 'm5stack tablet'

M5Core2 is the second generation core device in the M5Stack development kit series, which further enhances the functions of the original generation of cores.

Discover M5Stack's high-precision weight sensor featuring 24-bit accuracy, I2C communication, and STM32+HX711 chip integration - perfect for industrial, healthcare, and laboratory applications where precise weight measurement is crucial.

GROVE Cable would be a necessary tool used on M5Stack development, since all PORTs on M5Core are GROVE stadard. This GROVE cable, compatible with the GROVE port on M5Core,simply have 4 lines, two for data, one for power,and one for Ground.

CoreInk is a brand new E-ink display in the M5Stack cores range. Controlled by the ESP32-PICO-D4 This new device includes a 200x200 1.54" Black and White E-Ink Display. Compared to a regular LCD，E-ink displays are easier on the eyes, which makes them a great choice for reading or viewing for longer periods.

The Battery extension module is a 750mAh battery ADD-ON.

HUB is a unit that is used in order to expand the GROVE ports over the M5Stack device. For example, if we want sensors with different IIC addresses or output to 3 devices at the same time. (M5Stack device usually can output one device at a time to to limited amount of grove ports)

This universal connector for your M5 Stack, connects to GROVE, commonly used of this part is for the RGB LED strip extension.

It's used to convert the TTL standard to the RS485 standard. If the outside serial device is RS485 standard, you can attach this unit onto M5stack, therefore, to implement the communication with RS485 device by TTL protocol.

ATOM HUB PROTO is a DIY proto board module designed for use with the ATOM series. Users can build circuits or connect peripherals according to their own needs to satisfy the functions and requirements of specific scenarios. Considering the various possibilities of user connection, ATOM HUB PROTO provides a wealth of interfaces, including VH3.96 interface, DC-5V power interface, grove interface, and all kinds of openings are reserved on the shell to facilitate user wiring.

HEART is built using the MAX30100 chipset. MAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external hardware components are needed for integration into a wearable device.

DAC, is a unit with the ability to convert digital signal to analog signal (voltage waveform signal) with support for audio waveform and more. It integrates a 12-bit high resolution DAC chip named MCP4725 which has an on-board non-volatile memory (EEPROM). The unit communicates with the M5Core using the I2C protocol.

The ENV III HAT is a multifunctional environmental sensor adapted to attach to the M5StickC series.

This an application-level module, which implements a motion & robotic control and it is totally customizable with different length. Packed with Stepper motor, Mega328 microprocessor, RS485 serial bus, 1515 framework. It realized a linear motion control, you can program the stepper motor to move a certain length with high precision. This type of module can be applied to 3D print, linear push and etc.

M5Stack BASIC Kit, like its namesake, is a starter kit among the M5Stack development kit series. It’s a modular, stackable, scalable, and portable device which is powered with an ESP-32 core, which makes it open source, low cost, full-function, and easy for developers to handle new product development on all stages including circuit design, PCB design, software, mold design and production

Transform your DIY projects with the M5StickC PLUS2 Smart Watch Kit, featuring a 240x135 LCD display, ESP32 chip, 6-axis IMU, and digital microphone, plus LEGO-compatible accessories for versatile wearable development and IoT applications.

This universal connector for your M5 Stack, connects to pin, commonly used of this part is for the RGB LED strip extension.

ANGLE is a rotary switch Unit which simply includes a 10K Ohm potentiometer inside. This unit can be used for Continuous signal rotatory control for applications such as volume, brightness, or motor speed.

HEART is built using the MAX30100 chipset. MAX30100 is a complete pulse oximetry and heart-rate sensor system solution designed for the demanding requirements of wearable devices. The MAX30100 provides very small total solution size without sacrificing optical or electrical performance. Minimal external hardware components are needed for integration into a wearable device.

STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control.

Add a cool touch-screen rotary dial to your next build with the M5Stack M5Dial. The M5Dial integrates the necessary features and sensors for various smart...

Explore the AtomS3R IoT camera kit featuring ESP32-S3, 3MP OV3660 sensor, and built-in motion sensors - a compact programmable controller perfect for IoT monitoring, USB webcam applications, and embedded development projects.

Explore M5Stack's DAC2 I2C Unit featuring the GP8413 chip, offering dual-channel digital-to-analog conversion with 15-bit resolution and precision up to 0.01% linearity for accurate voltage control and signal processing applications.