Search results for: 'gravity 4-pin'

50 results

Gravity 4Pin IIC/I2C/UART Sensor Cable (10pcs)

Brand: DFRobot
The Gravity 4Pin IIC/I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length. One side is PH2.0-4p connector and the other side is XH2.54...
$10.50 AUD, inc GST

Gravity: 4Pin I2C/UART Sensor Cable for Arduino - 50cm (10 Pack)

Brand: DFRobot
The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 50cm length. One side is PH2.0-4p connector and the other side is XH2.54 DuPont...
$11.60 AUD, inc GST

Gravity: 8-Digital LED Segment Display Module (Green)

Brand: DFRobot
Features Display Mode: 8 segment×8 digit Support 16-level brightness adjustment IIC communication Specification Operating Voltage: DC 5V Operating Current:
$10.20 AUD, inc GST

Gravity 4Pin Sensor Adapter

Brand: DFRobot
This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimized its connection interface to make it compatible with gravity interface...
$5.20 AUD, inc GST

Gravity: PAJ7620U2 Gesture Sensor

Brand: DFRobot
Build an awesome interactive project with this PAJ7620U2 Gesture Sensor! It is an interactive sensor with 3D gesture recognition that can recognize 13 gestures at...
$23.80 AUD, inc GST

Gravity: 8-Digital LED Segment Display Module (Red)

Brand: DFRobot
Features Display Mode: 8 segment×8 digit Support 16-level brightness adjustment IIC communication Specification Operating Voltage: DC 5V Operating Current:
$10.20 AUD, inc GST

Gravity: I2C Non-contact IR Temperature Sensor (MLX90614-DCI)

Brand: DFRobot
We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object...
$114.95 AUD, inc GST

Gravity VEML6075 UV Sensor Module

Brand: DFRobot
This is a UV sensor module based on Vishay VEML6075 sensor, adopting individual UVA and UVB channel solution with 16-bit resolution. It can convert solar UV light...
$11.85 AUD, inc GST

2.54mm Pitch 4-Pin Screw Terminal Block

Brand: Core Electronics
Perfect for all Makers, these 4-Pin Screw Terminal Blocks allow you to secure a bunch of smaller wires.
$1.15 AUD, inc GST

2.54mm 1x4-Pin Straight Female Header

Brand: Core Electronics

Four header pins in a block for a permanent prototyping connection to your breakouts and PCBs.

$0.16 AUD, inc GST

Study Pack of HUSKYLENS for micro:bit

Brand: DFRobot
The Study Pack of HUSKYLENS for micro:bit is an HuskyLens extension kit based on micro:bit programming. It is suitable for students aged 8-19. Centered...
$92.65 AUD, inc GST

DIY Magnetic Connector - Right Angle Four Contact Pins

Brand: Adafruit
If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. It's...
$12.80 AUD, inc GST

Spring Terminals - PCB Mount (4-Pin)

Brand: Sparkfun
These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than breadboard or female header type connections.
$3.35 AUD, inc GST

Polarized Connectors - Header (4-Pin)

Brand: Sparkfun
Polarized connectors and headers for your perf board/PCB projects. Use these connectors for power connections or any sensor/general connection to prevent users from connecting the peripheral incorrectly or reversed.
$0.82 AUD, inc GST

SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic)

Brand: Sparkfun
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration...
$37.70 AUD, inc GST

ATX Right Angle Connector - PTH 4-pin

Brand: Sparkfun
This 4-pin, ATX, right angle connector mates up to the standard 4-pin computer peripheral port often found on ATX power supplies. This connector will also serve...
$1.10 AUD, inc GST
Similar matches

Through Hole Inline Pogo Pin Header - 9 Pins with 0.1" Spacing

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen...
$3.50 AUD, inc GST

Gravity: Active Isolated RS485 to UART Signal Converter Module

Brand: DFRobot
isolated RS485 to UART signal transfer module comes with protection circuits such as power isolation and TVS...
$33.45 AUD, inc GST

Gravity: 4-Digital LED Segment Display Module (Green)

Brand: DFRobot
Features Display Mode: 8 segment×4 digit Support 8-level brightness adjustment IIC communication Specification Operating Voltage: DC 5V Operating Current:
$8.40 AUD, inc GST

40-Pin 2.54mm Round Male Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$1.40 AUD, inc GST

Gravity BMP388 Barometric Pressure Sensors

Brand: DFRobot
This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code...
$11.90 AUD, inc GST

Gravity: I2C 4-20mA DAC Module (Arduino Compatible)

Brand: DFRobot
This is an I2C DAC module that outputs 0-25mA current. It offers more accurate 4-20mA current output after calibration, which can be used with most 4-20mA...
$18.95 AUD, inc GST

40-Pin 2.54mm Round Female Pin Header

Brand: Core Electronics

Great for low-profile designs or prototyping with DIP IC's.

$0.54 AUD, inc GST

Gravity: HX711 Weight Sensor Kit

Brand: DFRobot
The weight sensor is a practical sensor close to daily life scenes. It can make many interesting applications by acquiring the weight information of objects, such...
$43.80 AUD, inc GST

Gravity: IIC to Dual UART Module

Brand: DFRobot
This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.
$13.50 AUD, inc GST

Gravity: CO Sensor (Calibrated) - I2C & UART

Brand: DFRobot
The factory-calibrated carbon monoxide sensor has a variety of signal output methods to meet various communication needs...
$119.95 AUD, inc GST

Gravity: GNSS GPS BeiDou Positioning Module with RTC - I2C&UART

Brand: DFRobot
The module combines GNSS positioning and RTC functionality. Provides precise longitude, latitude, and altitude data. Compatible with Arduino, ESP32, and...
$44.70 AUD, inc GST

Gravity: N20 Micro Metal Gear Motor with Integrated Drive (3V-6V, 1:150/133RPM)

Brand: DFRobot
Gravity: N20 Miniature Metal Motor is a simplified motor control with integrated drive, PWM servo control, and low power consumption. Ideal for robots,...
$15.05 AUD, inc GST

Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514

Brand: DFRobot
This is a MEMS gas concentration sensor from DFRobot, supports the detection of various gas concentrations like CO, C2H5OH (Alcohol), H2, NO2, NH3...
$63.95 AUD, inc GST

Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP

Brand: DFRobot
Gravity: Air Pressure Sensor (15-700kPa) - I2C - MPX5700AP can be calibrated to known air pressure for quick measurement of pipeline air pressure values...
$92.05 AUD, inc GST

UNIHIKER K10 AI Educational Tool for Kids (Image Detection, Voice Recognition, TinyML)

Brand: DFRobot
UNIHIKER K10 is an AI learning tool with offline speech recognition and pre-installed vision models. Ideal for face detection, speech recognition, QR code...
$59.90 AUD, inc GST

Gravity: MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)

Brand: DFRobot
DFRobot Gravity: MAX30102 heart rate and blood oxygen sensor module integrates the Maxim MAX30102 chip and an MCU heart rate and blood oxygen algorithm...
$38.10 AUD, inc GST

Gravity: BLE Sensor Beacon Pack (5 PCS)

Brand: DFRobot
This Gravity: Wireless BLE Sensor Beacon with built-in 11-bit ADC is capable of collecting data from digital and analog sensors and broadcasting via...
$25.40 AUD, inc GST

Pogo Pin w/ Round Tip

Brand: Sparkfun
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire.
$2.55 AUD, inc GST

Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)

Brand: DFRobot
The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring...
$7.30 AUD, inc GST

Pogo Pin w/ Pointed Tip

Brand: Sparkfun
These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board holes. Solder them just like you would normal wire. This unit has a conical pointed tip.
$2.50 AUD, inc GST

Gravity: BMX160+BMP388 10 DOF Sensor

Brand: DFRobot
The BMX160 9-axis absolute orientation sensor from Bosch Sensortec is an ideal solution for applications that face strict constraints of board space, power consumption...
$33.50 AUD, inc GST

Gravity: 130 DC Motor Module

Brand: DFRobot
This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pin "gravity" interface saving lots of messy wiring.
$10.45 AUD, inc GST

UNIHIKER M10 - IoT Python Single Board Computer with Touchscreen

Brand: DFRobot
Unihiker is a Debian-based Linux SBC featuring a quad-core Arm Cortex A35, RISC-V MCU, built-in Jupyter Notebook, and 2.8 inch touchscreen. With I2C/ADC...
$114.95 AUD, inc GST

Gravity: CL2 Sensor (Calibrated) - I2C & UART

Brand: DFRobot
The factory-calibrated chlorine sensor has a variety of signal output methods to meet various communication needs...
$234.95 AUD, inc GST
Feedback

Please continue if you would like to leave feedback for any of these topics:

  • Website features/issues
  • Content errors/improvements
  • Missing products/categories
  • Product assignments to categories
  • Search results relevance

For all other inquiries (orders status, stock levels, etc), please contact our support team for quick assistance.

Note: click continue and a draft email will be opened to edit. If you don't have an email client on your device, then send a message via the chat icon on the bottom left of our website.

Makers love reviews as much as you do, please follow this link to review the products you have purchased.