Search results for: 'gps timing module'

This GPS module is well known amongst the community and is often used with the ArduCopter gear. At the core is a U-blox Neo-6 GPS receiver which has advanced power management and anti-jamming technology. The module takes care of all the hardware requirements leaving only 4 connections to your micro/external application (Vcc RX TX Gnd).

Support Raspberry Pi model A, B, A+, B+, Zero, 2, 3 with its' L80-39 GPS chip inside. Communicates satellite with UART or USB. CP2102 as USB to UART Bridge...

The GP-1818MK is a low-cost, high performance GPS module that provides position, velocity, and accurate timing via the NMEA-0183 protocol...

This GNSS receiver module from DFRobot supports BeiDou, GPS, Galileo and other multi-satellite systems. It compatible with Arduino, ESP32, micro:bit and...

This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora motherboard. Installed on the PCB is the latest of our Ultimate GPS modules, a small, super-thin, low power GPS module with built in data-logging capability! This module's easy to use, but extremely powerful!

The module combines GNSS positioning and RTC functionality. Provides precise longitude, latitude, and altitude data. Compatible with Arduino, ESP32, and...

This is an Ublox chip-based GPS receiver module of low power and high sensitivity that can receive 56 channels satellite signal. Compared with traditional GPS receivers...

At the heart of our Timing GNSS Breakout is Septentrio's mosaic-T, a compact, ultra-low power, multi-band, multi-constellation, high-precision GNSS timing...

SparkPNT GNSS Flex Modules are plug-in boards featuring different GNSS receivers. They are designed to be easily swapped for repairs and pin-compatible...

It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds Adafruit's celebrated Ultimate GPS on it, so you...

The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. There...

Let your project know its place in the world with this tiny but ultra-sensitive global positioning breakout!

With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the...

The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space...

This is the SMD version of PRT-07948, which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is connected to the negative side.

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox...

The SparkFun NEO-F10N GNSS L1/L5 Breakout is a super economical GNSS board with meter-level positional accuracy...

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from...

COM.GPS is a satellite positioning module in the M5Stack stacking module series. It is developed based on the NEO-M8N module and is equipped with an active antenna. The NEO-M8 can spend a small amount of time, conduct high-sensitivity acquisition, and keep the system low power consumption. NEO-M8N integrates the 72-channel u-blox M8 GNSS engine, supports multiple GNSS systems: BeiDou, Galileo, GLONASS, GPS / QZSS, allowing simultaneous reception 3 Data from a GNSS system.

USB/TTL Raspberry Pi GPS tracker is a small GPS location module. It is using L80-39 GPS chip, which includes 66 search channels and 22 simultaneous tracking channels...

The SAM-M10Q includes a built-in chip antenna and is compatible with the L1 band on all five GNSS constellations...

Achieve centimeter-level accuracy with out-of-the-box GNSS-RTK Positioning Kit. Pre-configured LoRa data link for easy setup. US 915 MHz, For UAVs, device...

The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations

The SparkFun RTK Reference Station is the perfect solution for your high-precision geolocation, surveying, and time reference needs...

The SparkFun mosaic-X5 Triband GNSS RTK Breakout you'll be provided with the easiest way to get started using L1, L2, and L5 GPS bands simultaneously!...

The SparkFun mosaic-X5 GNSS Flex pHAT is a development platform for the SparkFun GNSS Flex system. Designed to interface with a Raspberry Pi or comparable...

Elevate your Seeed Studio XIAO projects with the L76K GNSS Module, offering high precision and energy efficiency with support for multiple satellite systems. Discover enhanced signal reception with a built-in amplifier and ceramic antenna for reliable, precise positioning.

This IIC to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.

The LOCOSYS LC20031-V2 integrates a global navigation satellite system (GNSS) receiver with an embedded antenna to create a complete GNSS module that can...

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim design makes it ideal for applications where you don’t have a lot of space to work in. Really it’s quite small. This 56-channel GPS module, based on the uBlox 7th generation chipset, has an operating voltage of 3.3~5.5V, an antenna on board, and connects to your system via TTL serial. The 1Hz update rate is fast enough for the majority of applications (and can be increased to 10Hz if you need) so whether you’re tracking a pet or building an autonomous car, the GP-735 has you covered!

The SparkFun GPS-RTK-SMA Kit comes with just what you need to get started using GPS Real Time Kinematics and the u-blox ZED-F9P...

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered...

BMP390L is an industrial-grade dedicated digital barometric pressure sensor with high temperature stability, low drift, low power consumption (sleep...

With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the...

The SparkFun MAX-M10S Breakout is an ultra-low-power, GNSS board that is perfect for battery operated applications that don't possess a lot of space...

The SparkFun ZED-F9R GPS-RTK Breakout is a high-precision Automotive Dead Reckoning board with equally impressive configuration options...

The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a...

The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine...